Edit: 6/7/2015 - Updated from the Windows10 SDK.
MQ_OK - 0x00000000 - (0)
hrNone - 0x00000000 - (0)
The operation was successful
S_OK - 0x00000000 - (0)
SEC_E_OK - 0x00000000 - (0)
S_OK - 0x00000000 - (0)
categoryHeader - 0x00000001 - (1)
Header
hrNyi - 0xC0000001 - (1)
The function is not yet implemented
WDSCP_CATEGORY - 0x00000001 - (1)
WdsCp
WDSTPTMGMT_CATEGORY - 0x00000001 - (1)
WdsTptMgmt
CATEGORY_SEARCH - 0x00000001 - (1)
Search service
APC_INDEX_MISMATCH - 0x00000001 - (1)
APC_INDEX_MISMATCH
WDSMCSERVER_CATEGORY - 0x00000001 - (1)
WDS Multicast Server
WINBIO_FP_TOO_HIGH - 0x00000001 - (1)
Position your finger lower on the fingerprint reader.
E_NOTIMPL - 0x80000001 - (1)
Not implemented
S_FALSE - 0x00000001 - (1)
categoryUnused - 0x00000002 - (2)
None
S_OBJECT_NO_LONGER_VALID - 0x00000002 - (2)
CATEGORY_COLLATOR - 0x00000002 - (2)
Collator
DEVICE_QUEUE_NOT_BUSY - 0x00000002 - (2)
DEVICE_QUEUE_NOT_BUSY
DI_POLLEDDEVICE - 0x00000002 - (2)
WDSMCCLIENT_CATEGORY - 0x00000002 - (2)
WDS Multicast Client
WINBIO_FP_TOO_LOW - 0x00000002 - (2)
Position your finger higher on the fingerprint reader.
E_OUTOFMEMORY - 0x80000002 - (2)
Ran out of memory
categoryGeneral - 0x00000003 - (3)
General
CATEGORY_GATHERER - 0x00000003 - (3)
Gatherer
INVALID_AFFINITY_SET - 0x00000003 - (3)
INVALID_AFFINITY_SET
DI_DOWNLOADSKIPPED - 0x00000003 - (3)
WINBIO_FP_TOO_LEFT - 0x00000003 - (3)
Position your finger more to the right on the fingerprint reader.
E_INVALIDARG - 0x80000003 - (3)
One or more arguments are invalid
CATEGORY_INDEXER - 0x00000004 - (4)
Content index server
INVALID_DATA_ACCESS_TRAP - 0x00000004 - (4)
INVALID_DATA_ACCESS_TRAP
DI_EFFECTRESTARTED - 0x00000004 - (4)
WINBIO_FP_TOO_RIGHT - 0x00000004 - (4)
Position your finger more to the left on the fingerprint reader.
E_NOINTERFACE - 0x80000004 - (4)
No such interface supported
INVALID_PROCESS_ATTACH_ATTEMPT - 0x00000005 - (5)
INVALID_PROCESS_ATTACH_ATTEMPT
WINBIO_FP_TOO_FAST - 0x00000005 - (5)
Move your finger more slowly on the fingerprint reader.
E_POINTER - 0x80000005 - (5)
Invalid pointer
INVALID_PROCESS_DETACH_ATTEMPT - 0x00000006 - (6)
INVALID_PROCESS_DETACH_ATTEMPT
WINBIO_FP_TOO_SLOW - 0x00000006 - (6)
Move your finger more quickly on the fingerprint reader.
E_HANDLE - 0x80000006 - (6)
Invalid handle
INVALID_SOFTWARE_INTERRUPT - 0x00000007 - (7)
INVALID_SOFTWARE_INTERRUPT
WINBIO_FP_POOR_QUALITY - 0x00000007 - (7)
The fingerprint reader could not capture a good sample. Check to be sure the sensor is clean.
E_ABORT - 0x80000007 - (7)
Operation aborted
IRQL_NOT_DISPATCH_LEVEL - 0x00000008 - (8)
IRQL_NOT_DISPATCH_LEVEL
DI_TRUNCATED - 0x00000008 - (8)
WINBIO_FP_TOO_SKEWED - 0x00000008 - (8)
Hold your finger flat and straight when you use the fingerprint reader.
E_FAIL - 0x80000008 - (8)
Unspecified error
IRQL_NOT_GREATER_OR_EQUAL - 0x00000009 - (9)
IRQL_NOT_GREATER_OR_EQUAL
WINBIO_FP_TOO_SHORT - 0x00000009 - (9)
Use a longer stroke when scanning your fingerprint.
E_ACCESSDENIED - 0x80000009 - (9)
General access denied error
IRQL_NOT_LESS_OR_EQUAL - 0x0000000A - (10)
IRQL_NOT_LESS_OR_EQUAL
E_PENDING - 0x8000000A - (10)
WINBIO_FP_MERGE_FAILURE - 0x0000000A - (10)
The fingerprint reader could not capture a good sample. Check to be sure the sensor is clean.
E_PENDING - 0x8000000A - (10)
The data necessary to complete this operation is not yet available.
NO_EXCEPTION_HANDLING_SUPPORT - 0x0000000B - (11)
NO_EXCEPTION_HANDLING_SUPPORT
E_BOUNDS - 0x8000000B - (11)
The operation attempted to access data outside the valid range
MAXIMUM_WAIT_OBJECTS_EXCEEDED - 0x0000000C - (12)
MAXIMUM_WAIT_OBJECTS_EXCEEDED
DI_TRUNCATEDANDRESTARTED - 0x0000000C - (12)
E_CHANGED_STATE - 0x8000000C - (12)
A concurrent or interleaved operation changed the state of the object, invalidating this operation.
MUTEX_LEVEL_NUMBER_VIOLATION - 0x0000000D - (13)
MUTEX_LEVEL_NUMBER_VIOLATION
E_ILLEGAL_STATE_CHANGE - 0x8000000D - (13)
An illegal state change was requested.
NO_USER_MODE_CONTEXT - 0x0000000E - (14)
NO_USER_MODE_CONTEXT
E_ILLEGAL_METHOD_CALL - 0x8000000E - (14)
A method was called at an unexpected time.
SPIN_LOCK_ALREADY_OWNED - 0x0000000F - (15)
SPIN_LOCK_ALREADY_OWNED
RO_E_METADATA_NAME_NOT_FOUND - 0x8000000F - (15)
Typename or Namespace was not found in metadata file.
SPIN_LOCK_NOT_OWNED - 0x00000010 - (16)
SPIN_LOCK_NOT_OWNED
RO_E_METADATA_NAME_IS_NAMESPACE - 0x80000010 - (16)
Name is an existing namespace rather than a typename.
THREAD_NOT_MUTEX_OWNER - 0x00000011 - (17)
THREAD_NOT_MUTEX_OWNER
RO_E_METADATA_INVALID_TYPE_FORMAT - 0x80000011 - (17)
Typename has an invalid format.
TRAP_CAUSE_UNKNOWN - 0x00000012 - (18)
TRAP_CAUSE_UNKNOWN
RO_E_INVALID_METADATA_FILE - 0x80000012 - (18)
Metadata file is invalid or corrupted.
EMPTY_THREAD_REAPER_LIST - 0x00000013 - (19)
EMPTY_THREAD_REAPER_LIST
DI_WRITEPROTECT - 0x00000013 - (19)
RO_E_CLOSED - 0x80000013 - (19)
The object has been closed.
CREATE_DELETE_LOCK_NOT_LOCKED - 0x00000014 - (20)
CREATE_DELETE_LOCK_NOT_LOCKED
RO_E_EXCLUSIVE_WRITE - 0x80000014 - (20)
Only one thread may access the object during a write operation.
LAST_CHANCE_CALLED_FROM_KMODE - 0x00000015 - (21)
LAST_CHANCE_CALLED_FROM_KMODE
RO_E_CHANGE_NOTIFICATION_IN_PROGRESS - 0x80000015 - (21)
Operation is prohibited during change notification.
CID_HANDLE_CREATION - 0x00000016 - (22)
CID_HANDLE_CREATION
RO_E_ERROR_STRING_NOT_FOUND - 0x80000016 - (22)
The text associated with this error code could not be found.
CID_HANDLE_DELETION - 0x00000017 - (23)
CID_HANDLE_DELETION
E_STRING_NOT_NULL_TERMINATED - 0x80000017 - (23)
String not null terminated.
REFERENCE_BY_POINTER - 0x00000018 - (24)
REFERENCE_BY_POINTER
E_ILLEGAL_DELEGATE_ASSIGNMENT - 0x80000018 - (24)
A delegate was assigned when not allowed.
BAD_POOL_HEADER - 0x00000019 - (25)
BAD_POOL_HEADER
E_ASYNC_OPERATION_NOT_STARTED - 0x80000019 - (25)
An async operation was not properly started.
MEMORY_MANAGEMENT - 0x0000001A - (26)
MEMORY_MANAGEMENT
E_APPLICATION_EXITING - 0x8000001A - (26)
The application is exiting and cannot service this request
PFN_SHARE_COUNT - 0x0000001B - (27)
PFN_SHARE_COUNT
E_APPLICATION_VIEW_EXITING - 0x8000001B - (27)
The application view is exiting and cannot service this request
PFN_REFERENCE_COUNT - 0x0000001C - (28)
PFN_REFERENCE_COUNT
RO_E_MUST_BE_AGILE - 0x8000001C - (28)
The object must support the IAgileObject interface
NO_SPIN_LOCK_AVAILABLE - 0x0000001D - (29)
NO_SPIN_LOCK_AVAILABLE
RO_E_UNSUPPORTED_FROM_MTA - 0x8000001D - (29)
Activating a single-threaded class from MTA is not supported
KMODE_EXCEPTION_NOT_HANDLED - 0x0000001E - (30)
KMODE_EXCEPTION_NOT_HANDLED
RO_E_COMMITTED - 0x8000001E - (30)
The object has been committed.
SHARED_RESOURCE_CONV_ERROR - 0x0000001F - (31)
SHARED_RESOURCE_CONV_ERROR
RO_E_BLOCKED_CROSS_ASTA_CALL - 0x8000001F - (31)
A COM call to an ASTA was blocked because the call chain originated in or passed through another ASTA. This call pattern is deadlock-prone and disallowed by apartment call control.
KERNEL_APC_PENDING_DURING_EXIT - 0x00000020 - (32)
KERNEL_APC_PENDING_DURING_EXIT
QUOTA_UNDERFLOW - 0x00000021 - (33)
QUOTA_UNDERFLOW
FILE_SYSTEM - 0x00000022 - (34)
FILE_SYSTEM
FAT_FILE_SYSTEM - 0x00000023 - (35)
FAT_FILE_SYSTEM
NTFS_FILE_SYSTEM - 0x00000024 - (36)
NTFS_FILE_SYSTEM
NPFS_FILE_SYSTEM - 0x00000025 - (37)
NPFS_FILE_SYSTEM
CDFS_FILE_SYSTEM - 0x00000026 - (38)
CDFS_FILE_SYSTEM
RDR_FILE_SYSTEM - 0x00000027 - (39)
RDR_FILE_SYSTEM
CORRUPT_ACCESS_TOKEN - 0x00000028 - (40)
CORRUPT_ACCESS_TOKEN
SECURITY_SYSTEM - 0x00000029 - (41)
SECURITY_SYSTEM
INCONSISTENT_IRP - 0x0000002A - (42)
INCONSISTENT_IRP
PANIC_STACK_SWITCH - 0x0000002B - (43)
PANIC_STACK_SWITCH
PORT_DRIVER_INTERNAL - 0x0000002C - (44)
PORT_DRIVER_INTERNAL
SCSI_DISK_DRIVER_INTERNAL - 0x0000002D - (45)
SCSI_DISK_DRIVER_INTERNAL
DATA_BUS_ERROR - 0x0000002E - (46)
DATA_BUS_ERROR
INSTRUCTION_BUS_ERROR - 0x0000002F - (47)
INSTRUCTION_BUS_ERROR
SET_OF_INVALID_CONTEXT - 0x00000030 - (48)
SET_OF_INVALID_CONTEXT
PHASE0_INITIALIZATION_FAILED - 0x00000031 - (49)
PHASE0_INITIALIZATION_FAILED
PHASE1_INITIALIZATION_FAILED - 0x00000032 - (50)
PHASE1_INITIALIZATION_FAILED
UNEXPECTED_INITIALIZATION_CALL - 0x00000033 - (51)
UNEXPECTED_INITIALIZATION_CALL
CACHE_MANAGER - 0x00000034 - (52)
CACHE_MANAGER
NO_MORE_IRP_STACK_LOCATIONS - 0x00000035 - (53)
NO_MORE_IRP_STACK_LOCATIONS
DEVICE_REFERENCE_COUNT_NOT_ZERO - 0x00000036 - (54)
DEVICE_REFERENCE_COUNT_NOT_ZERO
FLOPPY_INTERNAL_ERROR - 0x00000037 - (55)
FLOPPY_INTERNAL_ERROR
SERIAL_DRIVER_INTERNAL - 0x00000038 - (56)
SERIAL_DRIVER_INTERNAL
SYSTEM_EXIT_OWNED_MUTEX - 0x00000039 - (57)
SYSTEM_EXIT_OWNED_MUTEX
SYSTEM_UNWIND_PREVIOUS_USER - 0x0000003A - (58)
SYSTEM_UNWIND_PREVIOUS_USER
SYSTEM_SERVICE_EXCEPTION - 0x0000003B - (59)
SYSTEM_SERVICE_EXCEPTION
INTERRUPT_UNWIND_ATTEMPTED - 0x0000003C - (60)
INTERRUPT_UNWIND_ATTEMPTED
INTERRUPT_EXCEPTION_NOT_HANDLED - 0x0000003D - (61)
INTERRUPT_EXCEPTION_NOT_HANDLED
MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED - 0x0000003E - (62)
MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED
NO_MORE_SYSTEM_PTES - 0x0000003F - (63)
NO_MORE_SYSTEM_PTES
TARGET_MDL_TOO_SMALL - 0x00000040 - (64)
TARGET_MDL_TOO_SMALL
MUST_SUCCEED_POOL_EMPTY - 0x00000041 - (65)
MUST_SUCCEED_POOL_EMPTY
ATDISK_DRIVER_INTERNAL - 0x00000042 - (66)
ATDISK_DRIVER_INTERNAL
NO_SUCH_PARTITION - 0x00000043 - (67)
NO_SUCH_PARTITION
MULTIPLE_IRP_COMPLETE_REQUESTS - 0x00000044 - (68)
MULTIPLE_IRP_COMPLETE_REQUESTS
INSUFFICIENT_SYSTEM_MAP_REGS - 0x00000045 - (69)
INSUFFICIENT_SYSTEM_MAP_REGS
DEREF_UNKNOWN_LOGON_SESSION - 0x00000046 - (70)
DEREF_UNKNOWN_LOGON_SESSION
REF_UNKNOWN_LOGON_SESSION - 0x00000047 - (71)
REF_UNKNOWN_LOGON_SESSION
CANCEL_STATE_IN_COMPLETED_IRP - 0x00000048 - (72)
CANCEL_STATE_IN_COMPLETED_IRP
PAGE_FAULT_WITH_INTERRUPTS_OFF - 0x00000049 - (73)
PAGE_FAULT_WITH_INTERRUPTS_OFF
IRQL_GT_ZERO_AT_SYSTEM_SERVICE - 0x0000004A - (74)
IRQL_GT_ZERO_AT_SYSTEM_SERVICE
STREAMS_INTERNAL_ERROR - 0x0000004B - (75)
STREAMS_INTERNAL_ERROR
FATAL_UNHANDLED_HARD_ERROR - 0x0000004C - (76)
FATAL_UNHANDLED_HARD_ERROR
NO_PAGES_AVAILABLE - 0x0000004D - (77)
NO_PAGES_AVAILABLE
PFN_LIST_CORRUPT - 0x0000004E - (78)
PFN_LIST_CORRUPT
NDIS_INTERNAL_ERROR - 0x0000004F - (79)
NDIS_INTERNAL_ERROR
PAGE_FAULT_IN_NONPAGED_AREA - 0x00000050 - (80)
PAGE_FAULT_IN_NONPAGED_AREA
REGISTRY_ERROR - 0x00000051 - (81)
REGISTRY_ERROR
MAILSLOT_FILE_SYSTEM - 0x00000052 - (82)
MAILSLOT_FILE_SYSTEM
NO_BOOT_DEVICE - 0x00000053 - (83)
NO_BOOT_DEVICE
LM_SERVER_INTERNAL_ERROR - 0x00000054 - (84)
LM_SERVER_INTERNAL_ERROR
DATA_COHERENCY_EXCEPTION - 0x00000055 - (85)
DATA_COHERENCY_EXCEPTION
INSTRUCTION_COHERENCY_EXCEPTION - 0x00000056 - (86)
INSTRUCTION_COHERENCY_EXCEPTION
XNS_INTERNAL_ERROR - 0x00000057 - (87)
XNS_INTERNAL_ERROR
VOLMGRX_INTERNAL_ERROR - 0x00000058 - (88)
VOLMGRX_INTERNAL_ERROR
PINBALL_FILE_SYSTEM - 0x00000059 - (89)
PINBALL_FILE_SYSTEM
CRITICAL_SERVICE_FAILED - 0x0000005A - (90)
CRITICAL_SERVICE_FAILED
SET_ENV_VAR_FAILED - 0x0000005B - (91)
SET_ENV_VAR_FAILED
HAL_INITIALIZATION_FAILED - 0x0000005C - (92)
HAL_INITIALIZATION_FAILED
UNSUPPORTED_PROCESSOR - 0x0000005D - (93)
UNSUPPORTED_PROCESSOR
OBJECT_INITIALIZATION_FAILED - 0x0000005E - (94)
OBJECT_INITIALIZATION_FAILED
SECURITY_INITIALIZATION_FAILED - 0x0000005F - (95)
SECURITY_INITIALIZATION_FAILED
PROCESS_INITIALIZATION_FAILED - 0x00000060 - (96)
PROCESS_INITIALIZATION_FAILED
HAL1_INITIALIZATION_FAILED - 0x00000061 - (97)
HAL1_INITIALIZATION_FAILED
OBJECT1_INITIALIZATION_FAILED - 0x00000062 - (98)
OBJECT1_INITIALIZATION_FAILED
SECURITY1_INITIALIZATION_FAILED - 0x00000063 - (99)
SECURITY1_INITIALIZATION_FAILED
SYMBOLIC_INITIALIZATION_FAILED - 0x00000064 - (100)
SYMBOLIC_INITIALIZATION_FAILED
MEMORY1_INITIALIZATION_FAILED - 0x00000065 - (101)
MEMORY1_INITIALIZATION_FAILED
CACHE_INITIALIZATION_FAILED - 0x00000066 - (102)
CACHE_INITIALIZATION_FAILED
CONFIG_INITIALIZATION_FAILED - 0x00000067 - (103)
CONFIG_INITIALIZATION_FAILED
FILE_INITIALIZATION_FAILED - 0x00000068 - (104)
FILE_INITIALIZATION_FAILED
IO1_INITIALIZATION_FAILED - 0x00000069 - (105)
IO1_INITIALIZATION_FAILED
LPC_INITIALIZATION_FAILED - 0x0000006A - (106)
LPC_INITIALIZATION_FAILED
PROCESS1_INITIALIZATION_FAILED - 0x0000006B - (107)
PROCESS1_INITIALIZATION_FAILED
REFMON_INITIALIZATION_FAILED - 0x0000006C - (108)
REFMON_INITIALIZATION_FAILED
SESSION1_INITIALIZATION_FAILED - 0x0000006D - (109)
SESSION1_INITIALIZATION_FAILED
BOOTPROC_INITIALIZATION_FAILED - 0x0000006E - (110)
BOOTPROC_INITIALIZATION_FAILED
ASSIGN_DRIVE_LETTERS_FAILED - 0x00000072 - (114)
ASSIGN_DRIVE_LETTERS_FAILED
CONFIG_LIST_FAILED - 0x00000073 - (115)
CONFIG_LIST_FAILED
BAD_SYSTEM_CONFIG_INFO - 0x00000074 - (116)
BAD_SYSTEM_CONFIG_INFO
CANNOT_WRITE_CONFIGURATION - 0x00000075 - (117)
CANNOT_WRITE_CONFIGURATION
PROCESS_HAS_LOCKED_PAGES - 0x00000076 - (118)
PROCESS_HAS_LOCKED_PAGES
KERNEL_STACK_INPAGE_ERROR - 0x00000077 - (119)
KERNEL_STACK_INPAGE_ERROR
PHASE0_EXCEPTION - 0x00000078 - (120)
PHASE0_EXCEPTION
MISMATCHED_HAL - 0x00000079 - (121)
MISMATCHED_HAL
KERNEL_DATA_INPAGE_ERROR - 0x0000007A - (122)
KERNEL_DATA_INPAGE_ERROR
INACCESSIBLE_BOOT_DEVICE - 0x0000007B - (123)
INACCESSIBLE_BOOT_DEVICE
BUGCODE_NDIS_DRIVER - 0x0000007C - (124)
BUGCODE_NDIS_DRIVER
INSTALL_MORE_MEMORY - 0x0000007D - (125)
INSTALL_MORE_MEMORY
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED - 0x0000007E - (126)
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
WINDOWS_NT_BANNER - 0x4000007E - (126)
Microsoft (R) Windows (R) Version %hs (Build %u%hs)
UNEXPECTED_KERNEL_MODE_TRAP - 0x0000007F - (127)
UNEXPECTED_KERNEL_MODE_TRAP
NMI_HARDWARE_FAILURE - 0x00000080 - (128)
NMI_HARDWARE_FAILURE
SPIN_LOCK_INIT_FAILURE - 0x00000081 - (129)
SPIN_LOCK_INIT_FAILURE
DFS_FILE_SYSTEM - 0x00000082 - (130)
DFS_FILE_SYSTEM
OFS_FILE_SYSTEM - 0x00000083 - (131)
OFS_FILE_SYSTEM
RECOM_DRIVER - 0x00000084 - (132)
RECOM_DRIVER
SETUP_FAILURE - 0x00000085 - (133)
SETUP_FAILURE
AUDIT_FAILURE - 0x00000086 - (134)
AUDIT_FAILURE
WINDOWS_NT_CSD_STRING - 0x40000087 - (135)
Service Pack
WINDOWS_NT_INFO_STRING - 0x40000088 - (136)
%u System Processor [%u MB Memory] %Z
WINDOWS_NT_MP_STRING - 0x40000089 - (137)
MultiProcessor Kernel
THREAD_TERMINATE_HELD_MUTEX - 0x4000008A - (138)
A kernel thread terminated while holding a mutex
MBR_CHECKSUM_MISMATCH - 0x0000008B - (139)
MBR_CHECKSUM_MISMATCH
KERNEL_MODE_EXCEPTION_NOT_HANDLED - 0x0000008E - (142)
KERNEL_MODE_EXCEPTION_NOT_HANDLED
PP0_INITIALIZATION_FAILED - 0x0000008F - (143)
PP0_INITIALIZATION_FAILED
PP1_INITIALIZATION_FAILED - 0x00000090 - (144)
PP1_INITIALIZATION_FAILED
WIN32K_INIT_OR_RIT_FAILURE - 0x00000091 - (145)
WIN32K_INIT_OR_RIT_FAILURE
UP_DRIVER_ON_MP_SYSTEM - 0x00000092 - (146)
UP_DRIVER_ON_MP_SYSTEM
INVALID_KERNEL_HANDLE - 0x00000093 - (147)
INVALID_KERNEL_HANDLE
KERNEL_STACK_LOCKED_AT_EXIT - 0x00000094 - (148)
KERNEL_STACK_LOCKED_AT_EXIT
PNP_INTERNAL_ERROR - 0x00000095 - (149)
PNP_INTERNAL_ERROR
INVALID_WORK_QUEUE_ITEM - 0x00000096 - (150)
INVALID_WORK_QUEUE_ITEM
BOUND_IMAGE_UNSUPPORTED - 0x00000097 - (151)
BOUND_IMAGE_UNSUPPORTED
END_OF_NT_EVALUATION_PERIOD - 0x00000098 - (152)
END_OF_NT_EVALUATION_PERIOD
INVALID_REGION_OR_SEGMENT - 0x00000099 - (153)
INVALID_REGION_OR_SEGMENT
SYSTEM_LICENSE_VIOLATION - 0x0000009A - (154)
SYSTEM_LICENSE_VIOLATION
UDFS_FILE_SYSTEM - 0x0000009B - (155)
UDFS_FILE_SYSTEM
MACHINE_CHECK_EXCEPTION - 0x0000009C - (156)
MACHINE_CHECK_EXCEPTION
WINDOWS_NT_INFO_STRING_PLURAL - 0x4000009D - (157)
%u System Processors [%u MB Memory] %Z
USER_MODE_HEALTH_MONITOR - 0x0000009E - (158)
USER_MODE_HEALTH_MONITOR
WINDOWS_NT_RC_STRING - 0x4000009E - (158)
RC
DRIVER_POWER_STATE_FAILURE - 0x0000009F - (159)
DRIVER_POWER_STATE_FAILURE
INTERNAL_POWER_ERROR - 0x000000A0 - (160)
INTERNAL_POWER_ERROR
PCI_BUS_DRIVER_INTERNAL - 0x000000A1 - (161)
PCI_BUS_DRIVER_INTERNAL
MEMORY_IMAGE_CORRUPT - 0x000000A2 - (162)
MEMORY_IMAGE_CORRUPT
ACPI_DRIVER_INTERNAL - 0x000000A3 - (163)
ACPI_DRIVER_INTERNAL
CNSS_FILE_SYSTEM_FILTER - 0x000000A4 - (164)
CNSS_FILE_SYSTEM_FILTER
ACPI_BIOS_ERROR - 0x000000A5 - (165)
ACPI_BIOS_ERROR
FP_EMULATION_ERROR - 0x000000A6 - (166)
FP_EMULATION_ERROR
BAD_EXHANDLE - 0x000000A7 - (167)
BAD_EXHANDLE
BOOTING_IN_SAFEMODE_MINIMAL - 0x000000A8 - (168)
BOOTING_IN_SAFEMODE_MINIMAL
BOOTING_IN_SAFEMODE_NETWORK - 0x000000A9 - (169)
BOOTING_IN_SAFEMODE_NETWORK
BOOTING_IN_SAFEMODE_DSREPAIR - 0x000000AA - (170)
BOOTING_IN_SAFEMODE_DSREPAIR
SESSION_HAS_VALID_POOL_ON_EXIT - 0x000000AB - (171)
SESSION_HAS_VALID_POOL_ON_EXIT
HAL_MEMORY_ALLOCATION - 0x000000AC - (172)
HAL_MEMORY_ALLOCATION
VIDEO_DRIVER_DEBUG_REPORT_REQUEST - 0x400000AD - (173)
VIDEO_DRIVER_DEBUG_REPORT_REQUEST
BGI_DETECTED_VIOLATION - 0x000000B1 - (177)
BGI_DETECTED_VIOLATION
VIDEO_DRIVER_INIT_FAILURE - 0x000000B4 - (180)
VIDEO_DRIVER_INIT_FAILURE
BOOTLOG_LOADED - 0x000000B5 - (181)
BOOTLOG_LOADED
BOOTLOG_NOT_LOADED - 0x000000B6 - (182)
BOOTLOG_NOT_LOADED
BOOTLOG_ENABLED - 0x000000B7 - (183)
BOOTLOG_ENABLED
ATTEMPTED_SWITCH_FROM_DPC - 0x000000B8 - (184)
ATTEMPTED_SWITCH_FROM_DPC
CHIPSET_DETECTED_ERROR - 0x000000B9 - (185)
CHIPSET_DETECTED_ERROR
SESSION_HAS_VALID_VIEWS_ON_EXIT - 0x000000BA - (186)
SESSION_HAS_VALID_VIEWS_ON_EXIT
NETWORK_BOOT_INITIALIZATION_FAILED - 0x000000BB - (187)
NETWORK_BOOT_INITIALIZATION_FAILED
NETWORK_BOOT_DUPLICATE_ADDRESS - 0x000000BC - (188)
NETWORK_BOOT_DUPLICATE_ADDRESS
INVALID_HIBERNATED_STATE - 0x000000BD - (189)
INVALID_HIBERNATED_STATE
ATTEMPTED_WRITE_TO_READONLY_MEMORY - 0x000000BE - (190)
ATTEMPTED_WRITE_TO_READONLY_MEMORY
MUTEX_ALREADY_OWNED - 0x000000BF - (191)
MUTEX_ALREADY_OWNED
PCI_CONFIG_SPACE_ACCESS_FAILURE - 0x000000C0 - (192)
PCI_CONFIG_SPACE_ACCESS_FAILURE
SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION - 0x000000C1 - (193)
SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION
BAD_POOL_CALLER - 0x000000C2 - (194)
BAD_POOL_CALLER
SYSTEM_IMAGE_BAD_SIGNATURE - 0x000000C3 - (195)
SYSTEM_IMAGE_BAD_SIGNATURE
DRIVER_VERIFIER_DETECTED_VIOLATION - 0x000000C4 - (196)
DRIVER_VERIFIER_DETECTED_VIOLATION
DRIVER_CORRUPTED_EXPOOL - 0x000000C5 - (197)
DRIVER_CORRUPTED_EXPOOL
DRIVER_CAUGHT_MODIFYING_FREED_POOL - 0x000000C6 - (198)
DRIVER_CAUGHT_MODIFYING_FREED_POOL
TIMER_OR_DPC_INVALID - 0x000000C7 - (199)
TIMER_OR_DPC_INVALID
IRQL_UNEXPECTED_VALUE - 0x000000C8 - (200)
IRQL_UNEXPECTED_VALUE
DRIVER_VERIFIER_IOMANAGER_VIOLATION - 0x000000C9 - (201)
DRIVER_VERIFIER_IOMANAGER_VIOLATION
PNP_DETECTED_FATAL_ERROR - 0x000000CA - (202)
PNP_DETECTED_FATAL_ERROR
DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS - 0x000000CB - (203)
DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS
PAGE_FAULT_IN_FREED_SPECIAL_POOL - 0x000000CC - (204)
PAGE_FAULT_IN_FREED_SPECIAL_POOL
PAGE_FAULT_BEYOND_END_OF_ALLOCATION - 0x000000CD - (205)
PAGE_FAULT_BEYOND_END_OF_ALLOCATION
DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS - 0x000000CE - (206)
DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS
TERMINAL_SERVER_DRIVER_MADE_INCORRECT_MEMORY_REFERENCE - 0x000000CF - (207)
TERMINAL_SERVER_DRIVER_MADE_INCORRECT_MEMORY_REFERENCE
DRIVER_CORRUPTED_MMPOOL - 0x000000D0 - (208)
DRIVER_CORRUPTED_MMPOOL
DRIVER_IRQL_NOT_LESS_OR_EQUAL - 0x000000D1 - (209)
DRIVER_IRQL_NOT_LESS_OR_EQUAL
BUGCODE_ID_DRIVER - 0x000000D2 - (210)
BUGCODE_ID_DRIVER
DRIVER_PORTION_MUST_BE_NONPAGED - 0x000000D3 - (211)
DRIVER_PORTION_MUST_BE_NONPAGED
SYSTEM_SCAN_AT_RAISED_IRQL_CAUGHT_IMPROPER_DRIVER_UNLOAD - 0x000000D4 - (212)
SYSTEM_SCAN_AT_RAISED_IRQL_CAUGHT_IMPROPER_DRIVER_UNLOAD
DRIVER_PAGE_FAULT_IN_FREED_SPECIAL_POOL - 0x000000D5 - (213)
DRIVER_PAGE_FAULT_IN_FREED_SPECIAL_POOL
DRIVER_PAGE_FAULT_BEYOND_END_OF_ALLOCATION - 0x000000D6 - (214)
DRIVER_PAGE_FAULT_BEYOND_END_OF_ALLOCATION
DRIVER_UNMAPPING_INVALID_VIEW - 0x000000D7 - (215)
DRIVER_UNMAPPING_INVALID_VIEW
DRIVER_USED_EXCESSIVE_PTES - 0x000000D8 - (216)
DRIVER_USED_EXCESSIVE_PTES
LOCKED_PAGES_TRACKER_CORRUPTION - 0x000000D9 - (217)
LOCKED_PAGES_TRACKER_CORRUPTION
SYSTEM_PTE_MISUSE - 0x000000DA - (218)
SYSTEM_PTE_MISUSE
DRIVER_CORRUPTED_SYSPTES - 0x000000DB - (219)
DRIVER_CORRUPTED_SYSPTES
DRIVER_INVALID_STACK_ACCESS - 0x000000DC - (220)
DRIVER_INVALID_STACK_ACCESS
POOL_CORRUPTION_IN_FILE_AREA - 0x000000DE - (222)
POOL_CORRUPTION_IN_FILE_AREA
IMPERSONATING_WORKER_THREAD - 0x000000DF - (223)
IMPERSONATING_WORKER_THREAD
ACPI_BIOS_FATAL_ERROR - 0x000000E0 - (224)
ACPI_BIOS_FATAL_ERROR
WORKER_THREAD_RETURNED_AT_BAD_IRQL - 0x000000E1 - (225)
WORKER_THREAD_RETURNED_AT_BAD_IRQL
MANUALLY_INITIATED_CRASH - 0x000000E2 - (226)
MANUALLY_INITIATED_CRASH
RESOURCE_NOT_OWNED - 0x000000E3 - (227)
RESOURCE_NOT_OWNED
WORKER_INVALID - 0x000000E4 - (228)
WORKER_INVALID
POWER_FAILURE_SIMULATE - 0x000000E5 - (229)
POWER_FAILURE_SIMULATE
DRIVER_VERIFIER_DMA_VIOLATION - 0x000000E6 - (230)
DRIVER_VERIFIER_DMA_VIOLATION
INVALID_FLOATING_POINT_STATE - 0x000000E7 - (231)
INVALID_FLOATING_POINT_STATE
INVALID_CANCEL_OF_FILE_OPEN - 0x000000E8 - (232)
INVALID_CANCEL_OF_FILE_OPEN
ACTIVE_EX_WORKER_THREAD_TERMINATION - 0x000000E9 - (233)
ACTIVE_EX_WORKER_THREAD_TERMINATION
THREAD_STUCK_IN_DEVICE_DRIVER - 0x000000EA - (234)
THREAD_STUCK_IN_DEVICE_DRIVER
DIRTY_MAPPED_PAGES_CONGESTION - 0x000000EB - (235)
DIRTY_MAPPED_PAGES_CONGESTION
SESSION_HAS_VALID_SPECIAL_POOL_ON_EXIT - 0x000000EC - (236)
SESSION_HAS_VALID_SPECIAL_POOL_ON_EXIT
UNMOUNTABLE_BOOT_VOLUME - 0x000000ED - (237)
UNMOUNTABLE_BOOT_VOLUME
CRITICAL_PROCESS_DIED - 0x000000EF - (239)
CRITICAL_PROCESS_DIED
SCSI_VERIFIER_DETECTED_VIOLATION - 0x000000F1 - (241)
SCSI_VERIFIER_DETECTED_VIOLATION
HARDWARE_INTERRUPT_STORM - 0x000000F2 - (242)
HARDWARE_INTERRUPT_STORM
DISORDERLY_SHUTDOWN - 0x000000F3 - (243)
DISORDERLY_SHUTDOWN
CRITICAL_OBJECT_TERMINATION - 0x000000F4 - (244)
CRITICAL_OBJECT_TERMINATION
FLTMGR_FILE_SYSTEM - 0x000000F5 - (245)
FLTMGR_FILE_SYSTEM
PCI_VERIFIER_DETECTED_VIOLATION - 0x000000F6 - (246)
PCI_VERIFIER_DETECTED_VIOLATION
DRIVER_OVERRAN_STACK_BUFFER - 0x000000F7 - (247)
DRIVER_OVERRAN_STACK_BUFFER
RAMDISK_BOOT_INITIALIZATION_FAILED - 0x000000F8 - (248)
RAMDISK_BOOT_INITIALIZATION_FAILED
DRIVER_RETURNED_STATUS_REPARSE_FOR_VOLUME_OPEN - 0x000000F9 - (249)
DRIVER_RETURNED_STATUS_REPARSE_FOR_VOLUME_OPEN
HTTP_DRIVER_CORRUPTED - 0x000000FA - (250)
HTTP_DRIVER_CORRUPTED
RECURSIVE_MACHINE_CHECK - 0x000000FB - (251)
RECURSIVE_MACHINE_CHECK
ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY - 0x000000FC - (252)
ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
DIRTY_NOWRITE_PAGES_CONGESTION - 0x000000FD - (253)
DIRTY_NOWRITE_PAGES_CONGESTION
BUGCODE_USB_DRIVER - 0x000000FE - (254)
BUGCODE_USB_DRIVER
RESERVE_QUEUE_OVERFLOW - 0x000000FF - (255)
RESERVE_QUEUE_OVERFLOW
LOADER_BLOCK_MISMATCH - 0x00000100 - (256)
LOADER_BLOCK_MISMATCH
CLOCK_WATCHDOG_TIMEOUT - 0x00000101 - (257)
CLOCK_WATCHDOG_TIMEOUT
DPC_WATCHDOG_TIMEOUT - 0x00000102 - (258)
DPC_WATCHDOG_TIMEOUT
MUP_FILE_SYSTEM - 0x00000103 - (259)
MUP_FILE_SYSTEM
AGP_INVALID_ACCESS - 0x00000104 - (260)
AGP_INVALID_ACCESS
AGP_GART_CORRUPTION - 0x00000105 - (261)
AGP_GART_CORRUPTION
AGP_ILLEGALLY_REPROGRAMMED - 0x00000106 - (262)
AGP_ILLEGALLY_REPROGRAMMED
KERNEL_EXPAND_STACK_ACTIVE - 0x00000107 - (263)
KERNEL_EXPAND_STACK_ACTIVE
THIRD_PARTY_FILE_SYSTEM_FAILURE - 0x00000108 - (264)
THIRD_PARTY_FILE_SYSTEM_FAILURE
CRITICAL_STRUCTURE_CORRUPTION - 0x00000109 - (265)
CRITICAL_STRUCTURE_CORRUPTION
APP_TAGGING_INITIALIZATION_FAILED - 0x0000010A - (266)
APP_TAGGING_INITIALIZATION_FAILED
DFSC_FILE_SYSTEM - 0x0000010B - (267)
DFSC_FILE_SYSTEM
FSRTL_EXTRA_CREATE_PARAMETER_VIOLATION - 0x0000010C - (268)
FSRTL_EXTRA_CREATE_PARAMETER_VIOLATION
WDF_VIOLATION - 0x0000010D - (269)
WDF_VIOLATION
VIDEO_MEMORY_MANAGEMENT_INTERNAL - 0x0000010E - (270)
VIDEO_MEMORY_MANAGEMENT_INTERNAL
DRIVER_INVALID_CRUNTIME_PARAMETER - 0x00000110 - (272)
DRIVER_INVALID_CRUNTIME_PARAMETER
RECURSIVE_NMI - 0x00000111 - (273)
RECURSIVE_NMI
MSRPC_STATE_VIOLATION - 0x00000112 - (274)
MSRPC_STATE_VIOLATION
VIDEO_DXGKRNL_FATAL_ERROR - 0x00000113 - (275)
VIDEO_DXGKRNL_FATAL_ERROR
VIDEO_SHADOW_DRIVER_FATAL_ERROR - 0x00000114 - (276)
VIDEO_SHADOW_DRIVER_FATAL_ERROR
AGP_INTERNAL - 0x00000115 - (277)
AGP_INTERNAL
VIDEO_TDR_FAILURE - 0x00000116 - (278)
VIDEO_TDR_FAILURE
VIDEO_TDR_TIMEOUT_DETECTED - 0x00000117 - (279)
VIDEO_TDR_TIMEOUT_DETECTED
NTHV_GUEST_ERROR - 0x00000118 - (280)
NTHV_GUEST_ERROR
VIDEO_SCHEDULER_INTERNAL_ERROR - 0x00000119 - (281)
VIDEO_SCHEDULER_INTERNAL_ERROR
EM_INITIALIZATION_ERROR - 0x0000011A - (282)
EM_INITIALIZATION_ERROR
DRIVER_RETURNED_HOLDING_CANCEL_LOCK - 0x0000011B - (283)
DRIVER_RETURNED_HOLDING_CANCEL_LOCK
ATTEMPTED_WRITE_TO_CM_PROTECTED_STORAGE - 0x0000011C - (284)
ATTEMPTED_WRITE_TO_CM_PROTECTED_STORAGE
EVENT_TRACING_FATAL_ERROR - 0x0000011D - (285)
EVENT_TRACING_FATAL_ERROR
TOO_MANY_RECURSIVE_FAULTS - 0x0000011E - (286)
TOO_MANY_RECURSIVE_FAULTS
INVALID_DRIVER_HANDLE - 0x0000011F - (287)
INVALID_DRIVER_HANDLE
BITLOCKER_FATAL_ERROR - 0x00000120 - (288)
BITLOCKER_FATAL_ERROR
DRIVER_VIOLATION - 0x00000121 - (289)
DRIVER_VIOLATION
WHEA_INTERNAL_ERROR - 0x00000122 - (290)
WHEA_INTERNAL_ERROR
CRYPTO_SELF_TEST_FAILURE - 0x00000123 - (291)
CRYPTO_SELF_TEST_FAILURE
WHEA_UNCORRECTABLE_ERROR - 0x00000124 - (292)
WHEA_UNCORRECTABLE_ERROR
NMR_INVALID_STATE - 0x00000125 - (293)
NMR_INVALID_STATE
NETIO_INVALID_POOL_CALLER - 0x00000126 - (294)
NETIO_INVALID_POOL_CALLER
PAGE_NOT_ZERO - 0x00000127 - (295)
PAGE_NOT_ZERO
WORKER_THREAD_RETURNED_WITH_BAD_IO_PRIORITY - 0x00000128 - (296)
WORKER_THREAD_RETURNED_WITH_BAD_IO_PRIORITY
WORKER_THREAD_RETURNED_WITH_BAD_PAGING_IO_PRIORITY - 0x00000129 - (297)
WORKER_THREAD_RETURNED_WITH_BAD_PAGING_IO_PRIORITY
MUI_NO_VALID_SYSTEM_LANGUAGE - 0x0000012A - (298)
MUI_NO_VALID_SYSTEM_LANGUAGE
FAULTY_HARDWARE_CORRUPTED_PAGE - 0x0000012B - (299)
FAULTY_HARDWARE_CORRUPTED_PAGE
EXFAT_FILE_SYSTEM - 0x0000012C - (300)
EXFAT_FILE_SYSTEM
VOLSNAP_OVERLAPPED_TABLE_ACCESS - 0x0000012D - (301)
VOLSNAP_OVERLAPPED_TABLE_ACCESS
INVALID_MDL_RANGE - 0x0000012E - (302)
INVALID_MDL_RANGE
VHD_BOOT_INITIALIZATION_FAILED - 0x0000012F - (303)
VHD_BOOT_INITIALIZATION_FAILED
DYNAMIC_ADD_PROCESSOR_MISMATCH - 0x00000130 - (304)
DYNAMIC_ADD_PROCESSOR_MISMATCH
INVALID_EXTENDED_PROCESSOR_STATE - 0x00000131 - (305)
INVALID_EXTENDED_PROCESSOR_STATE
RESOURCE_OWNER_POINTER_INVALID - 0x00000132 - (306)
RESOURCE_OWNER_POINTER_INVALID
DPC_WATCHDOG_VIOLATION - 0x00000133 - (307)
DPC_WATCHDOG_VIOLATION
DRIVE_EXTENDER - 0x00000134 - (308)
DRIVE_EXTENDER
REGISTRY_FILTER_DRIVER_EXCEPTION - 0x00000135 - (309)
REGISTRY_FILTER_DRIVER_EXCEPTION
VHD_BOOT_HOST_VOLUME_NOT_ENOUGH_SPACE - 0x00000136 - (310)
VHD_BOOT_HOST_VOLUME_NOT_ENOUGH_SPACE
WIN32K_HANDLE_MANAGER - 0x00000137 - (311)
WIN32K_HANDLE_MANAGER
GPIO_CONTROLLER_DRIVER_ERROR - 0x00000138 - (312)
GPIO_CONTROLLER_DRIVER_ERROR
KERNEL_SECURITY_CHECK_FAILURE - 0x00000139 - (313)
KERNEL_SECURITY_CHECK_FAILURE
KERNEL_MODE_HEAP_CORRUPTION - 0x0000013A - (314)
KERNEL_MODE_HEAP_CORRUPTION
PASSIVE_INTERRUPT_ERROR - 0x0000013B - (315)
PASSIVE_INTERRUPT_ERROR
INVALID_IO_BOOST_STATE - 0x0000013C - (316)
INVALID_IO_BOOST_STATE
CRITICAL_INITIALIZATION_FAILURE - 0x0000013D - (317)
CRITICAL_INITIALIZATION_FAILURE
STORAGE_DEVICE_ABNORMALITY_DETECTED - 0x00000140 - (320)
STORAGE_DEVICE_ABNORMALITY_DETECTED
VIDEO_ENGINE_TIMEOUT_DETECTED - 0x00000141 - (321)
VIDEO_ENGINE_TIMEOUT_DETECTED
VIDEO_TDR_APPLICATION_BLOCKED - 0x00000142 - (322)
VIDEO_TDR_APPLICATION_BLOCKED
PROCESSOR_DRIVER_INTERNAL - 0x00000143 - (323)
PROCESSOR_DRIVER_INTERNAL
BUGCODE_USB3_DRIVER - 0x00000144 - (324)
BUGCODE_USB3_DRIVER
SECURE_BOOT_VIOLATION - 0x00000145 - (325)
SECURE_BOOT_VIOLATION
NDIS_NET_BUFFER_LIST_INFO_ILLEGALLY_TRANSFERRED - 0x00000146 - (326)
NDIS_NET_BUFFER_LIST_INFO_ILLEGALLY_TRANSFERRED
ABNORMAL_RESET_DETECTED - 0x00000147 - (327)
ABNORMAL_RESET_DETECTED
IO_OBJECT_INVALID - 0x00000148 - (328)
IO_OBJECT_INVALID
REFS_FILE_SYSTEM - 0x00000149 - (329)
REFS_FILE_SYSTEM
KERNEL_WMI_INTERNAL - 0x0000014A - (330)
KERNEL_WMI_INTERNAL
SOC_SUBSYSTEM_FAILURE - 0x0000014B - (331)
SOC_SUBSYSTEM_FAILURE
FATAL_ABNORMAL_RESET_ERROR - 0x0000014C - (332)
FATAL_ABNORMAL_RESET_ERROR
EXCEPTION_SCOPE_INVALID - 0x0000014D - (333)
EXCEPTION_SCOPE_INVALID
SOC_CRITICAL_DEVICE_REMOVED - 0x0000014E - (334)
SOC_CRITICAL_DEVICE_REMOVED
PDC_WATCHDOG_TIMEOUT - 0x0000014F - (335)
PDC_WATCHDOG_TIMEOUT
TCPIP_AOAC_NIC_ACTIVE_REFERENCE_LEAK - 0x00000150 - (336)
TCPIP_AOAC_NIC_ACTIVE_REFERENCE_LEAK
UNSUPPORTED_INSTRUCTION_MODE - 0x00000151 - (337)
UNSUPPORTED_INSTRUCTION_MODE
INVALID_PUSH_LOCK_FLAGS - 0x00000152 - (338)
INVALID_PUSH_LOCK_FLAGS
KERNEL_LOCK_ENTRY_LEAKED_ON_THREAD_TERMINATION - 0x00000153 - (339)
KERNEL_LOCK_ENTRY_LEAKED_ON_THREAD_TERMINATION
UNEXPECTED_STORE_EXCEPTION - 0x00000154 - (340)
UNEXPECTED_STORE_EXCEPTION
OS_DATA_TAMPERING - 0x00000155 - (341)
OS_DATA_TAMPERING
WINSOCK_DETECTED_HUNG_CLOSESOCKET_LIVEDUMP - 0x00000156 - (342)
WINSOCK_DETECTED_HUNG_CLOSESOCKET_LIVEDUMP
KERNEL_THREAD_PRIORITY_FLOOR_VIOLATION - 0x00000157 - (343)
KERNEL_THREAD_PRIORITY_FLOOR_VIOLATION
ILLEGAL_IOMMU_PAGE_FAULT - 0x00000158 - (344)
ILLEGAL_IOMMU_PAGE_FAULT
HAL_ILLEGAL_IOMMU_PAGE_FAULT - 0x00000159 - (345)
HAL_ILLEGAL_IOMMU_PAGE_FAULT
SDBUS_INTERNAL_ERROR - 0x0000015A - (346)
SDBUS_INTERNAL_ERROR
WORKER_THREAD_RETURNED_WITH_SYSTEM_PAGE_PRIORITY_ACTIVE - 0x0000015B - (347)
WORKER_THREAD_RETURNED_WITH_SYSTEM_PAGE_PRIORITY_ACTIVE
PDC_WATCHDOG_TIMEOUT_LIVEDUMP - 0x0000015C - (348)
PDC_WATCHDOG_TIMEOUT_LIVEDUMP
SOC_SUBSYSTEM_FAILURE_LIVEDUMP - 0x0000015D - (349)
SOC_SUBSYSTEM_FAILURE_LIVEDUMP
BUGCODE_NDIS_DRIVER_LIVE_DUMP - 0x0000015E - (350)
BUGCODE_NDIS_DRIVER_LIVE_DUMP
CONNECTED_STANDBY_WATCHDOG_TIMEOUT_LIVEDUMP - 0x0000015F - (351)
CONNECTED_STANDBY_WATCHDOG_TIMEOUT_LIVEDUMP
WIN32K_ATOMIC_CHECK_FAILURE - 0x00000160 - (352)
WIN32K_ATOMIC_CHECK_FAILURE
LIVE_SYSTEM_DUMP - 0x00000161 - (353)
LIVE_SYSTEM_DUMP
KERNEL_AUTO_BOOST_INVALID_LOCK_RELEASE - 0x00000162 - (354)
KERNEL_AUTO_BOOST_INVALID_LOCK_RELEASE
WORKER_THREAD_TEST_CONDITION - 0x00000163 - (355)
WORKER_THREAD_TEST_CONDITION
WIN32K_CRITICAL_FAILURE - 0x00000164 - (356)
WIN32K_CRITICAL_FAILURE
CLUSTER_CSV_STATUS_IO_TIMEOUT_LIVEDUMP - 0x00000165 - (357)
CLUSTER_CSV_STATUS_IO_TIMEOUT_LIVEDUMP
CLUSTER_RESOURCE_CALL_TIMEOUT_LIVEDUMP - 0x00000166 - (358)
CLUSTER_RESOURCE_CALL_TIMEOUT_LIVEDUMP
CLUSTER_CSV_SNAPSHOT_DEVICE_INFO_TIMEOUT_LIVEDUMP - 0x00000167 - (359)
CLUSTER_CSV_SNAPSHOT_DEVICE_INFO_TIMEOUT_LIVEDUMP
CLUSTER_CSV_STATE_TRANSITION_TIMEOUT_LIVEDUMP - 0x00000168 - (360)
CLUSTER_CSV_STATE_TRANSITION_TIMEOUT_LIVEDUMP
CLUSTER_CSV_VOLUME_ARRIVAL_LIVEDUMP - 0x00000169 - (361)
CLUSTER_CSV_VOLUME_ARRIVAL_LIVEDUMP
CLUSTER_CSV_VOLUME_REMOVAL_LIVEDUMP - 0x0000016A - (362)
CLUSTER_CSV_VOLUME_REMOVAL_LIVEDUMP
CLUSTER_CSV_CLUSTER_WATCHDOG_LIVEDUMP - 0x0000016B - (363)
CLUSTER_CSV_CLUSTER_WATCHDOG_LIVEDUMP
INVALID_RUNDOWN_PROTECTION_FLAGS - 0x0000016C - (364)
INVALID_RUNDOWN_PROTECTION_FLAGS
INVALID_SLOT_ALLOCATOR_FLAGS - 0x0000016D - (365)
INVALID_SLOT_ALLOCATOR_FLAGS
ERESOURCE_INVALID_RELEASE - 0x0000016E - (366)
ERESOURCE_INVALID_RELEASE
CLUSTER_CSV_STATE_TRANSITION_INTERVAL_TIMEOUT_LIVEDUMP - 0x0000016F - (367)
CLUSTER_CSV_STATE_TRANSITION_INTERVAL_TIMEOUT_LIVEDUMP
CLUSTER_CSV_CLUSSVC_DISCONNECT_WATCHDOG - 0x00000170 - (368)
CLUSTER_CSV_CLUSSVC_DISCONNECT_WATCHDOG
CRYPTO_LIBRARY_INTERNAL_ERROR - 0x00000171 - (369)
CRYPTO_LIBRARY_INTERNAL_ERROR
PREVIOUS_FATAL_ABNORMAL_RESET_ERROR - 0x00000175 - (373)
PREVIOUS_FATAL_ABNORMAL_RESET_ERROR
ELAM_DRIVER_DETECTED_FATAL_ERROR - 0x00000178 - (376)
ELAM_DRIVER_DETECTED_FATAL_ERROR
WVR_LIVEDUMP_REPLICATION_IOCONTEXT_TIMEOUT - 0x00000180 - (384)
WVR_LIVEDUMP_REPLICATION_IOCONTEXT_TIMEOUT
WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT - 0x00000181 - (385)
WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT
WVR_LIVEDUMP_RECOVERY_IOCONTEXT_TIMEOUT - 0x00000182 - (386)
WVR_LIVEDUMP_RECOVERY_IOCONTEXT_TIMEOUT
WVR_LIVEDUMP_APP_IO_TIMEOUT - 0x00000183 - (387)
WVR_LIVEDUMP_APP_IO_TIMEOUT
WVR_LIVEDUMP_MANUALLY_INITIATED - 0x00000184 - (388)
WVR_LIVEDUMP_MANUALLY_INITIATED
WVR_LIVEDUMP_STATE_FAILURE - 0x00000185 - (389)
WVR_LIVEDUMP_STATE_FAILURE
WVR_LIVEDUMP_CRITICAL_ERROR - 0x00000186 - (390)
WVR_LIVEDUMP_CRITICAL_ERROR
VIDEO_DWMINIT_TIMEOUT_FALLBACK_BDD - 0x00000187 - (391)
VIDEO_DWMINIT_TIMEOUT_FALLBACK_BDD
CLUSTER_CSVFS_LIVEDUMP - 0x00000188 - (392)
CLUSTER_CSVFS_LIVEDUMP
BAD_OBJECT_HEADER - 0x00000189 - (393)
BAD_OBJECT_HEADER
SILO_CORRUPT - 0x0000018A - (394)
SILO_CORRUPT
WIN32K_CRITICAL_FAILURE_LIVEDUMP - 0x00000190 - (400)
WIN32K_CRITICAL_FAILURE_LIVEDUMP
PF_DETECTED_CORRUPTION - 0x00000191 - (401)
PF_DETECTED_CORRUPTION
DRIVER_VERIFIER_DETECTED_VIOLATION_LIVEDUMP - 0x000001C4 - (452)
DRIVER_VERIFIER_DETECTED_VIOLATION_LIVEDUMP
XBOX_INVERTED_FUNCTION_TABLE_OVERFLOW - 0x00000358 - (856)
XBOX_INVERTED_FUNCTION_TABLE_OVERFLOW
XBOX_CORRUPTED_IMAGE_BASE - 0x00000359 - (857)
XBOX_CORRUPTED_IMAGE_BASE
XBOX_360_SYSTEM_CRASH - 0x00000360 - (864)
XBOX_360_SYSTEM_CRASH
EVENT_SSSEARCH_STARTED - 0x400003EB - (1003)
The Windows Search Service started.%1
EVENT_SSSEARCH_STARTING_SETUP - 0x400003EC - (1004)
The Windows Search service is creating the new search index {Reason: %2}. %1
EVENT_SSSEARCH_SETUP_SUCCEEDED - 0x400003ED - (1005)
The Windows Search Service has successfully created the new search index. %1
EVENT_SSSEARCH_SETUP_FAILED - 0xC00003EE - (1006)
The Windows Search Service has failed to create the new search index. Internal error <%2, %3, %4>. %1
EVENT_OUTOFMEMORY - 0xC00003EF - (1007)
The Windows Search Service was unable to allocate memory.%1
EVENT_SSSEARCH_SETUP_CLEANUP_STARTED - 0x800003F0 - (1008)
The Windows Search Service is starting up and attempting to remove the old search index {Reason: %2}. %1
EVENT_EXCEPTION - 0xC00003F1 - (1009)
An exception occurred in %2. Check other related Event Log messages.%1
EVENT_SSSEARCH_SETUP_CLEANUP_SUCCEEDED - 0x400003F2 - (1010)
The Windows Search Service has successfully removed the old search index. %1
EVENT_SSSEARCH_SETUP_CLEANUP_FAILED - 0xC00003F3 - (1011)
The Windows Search Service has failed to remove the old search index. Internal error <%2,%3>. %1
EVENT_SSSEARCH_STOPPED - 0x400003F5 - (1013)
Windows Search Service stopped normally.%1
EVENT_SSSEARCH_CREATE_PATH_RULES_FAILED - 0x800003F6 - (1014)
The Windows Search Service has failed to create one or more path rules. The service will continue creating the SystemIndex search index. Debug information: <%2>. %1
EVENT_SSSEARCH_DROPPED_EVENTS - 0x800003F7 - (1015)
Event ID %2 for the Windows Search Service has been suppressed %3 time(s) since %4. This event is used to suppress Windows Search Service events that have occurred frequently within a short period of time. See Event ID %2 for further details on this event.%1
EVENT_SSSEARCH_DATAFILES_MOVE_FAILED - 0xC00003F8 - (1016)
The Windows Search Service failed to move Index files from %2 to %3 with the following error: <%4,%5>. This might be because the target directory is not empty, or because the SYSTEM account doesn't have write access to the target directory. %1
EVENT_SSSEARCH_DATAFILES_MOVE_SUCCEEDED - 0x400003F9 - (1017)
The Windows Search Service successfully moved index files from %2 to %3. %1
EVENT_SSSEARCH_DATAFILES_MOVE_ROLLBACK_ERRORS - 0x800003FA - (1018)
While rolling back the index, the Windows Search Service encountered the following error: <%4,%5>. Index files were not moved from %2 to %3. %1
EVENT_SSSEARCH_CSM_SAVE_FAILED - 0xC00003FB - (1019)
Windows Search Service failed to process the list of included and excluded locations with the error <%2, %3, "%4">. %1
EVENT_CONFIG_SYNTAX - 0x80000414 - (1044)
An error occurred in configuration file <%2>.%1
EVENT_UNPRIVILEGED_SERVICE_ACCOUNT - 0x8000041C - (1052)
The account used to start the Windows Search Service does not have the rights to operate the service. The account must be either the LocalSystem account or a member of the Administrators group. Use the Services tab in the Control Panel to change the startup account for the search service.%1
EVENT_SYSTEM_EXCEPTION - 0x8000041D - (1053)
The system exception %1 occurred, and will be handled. If this causes problems, contact Microsoft Product Support Services and include the stack trace in the event. %2.
XBOX_360_SYSTEM_CRASH_RESERVED - 0x00000420 - (1056)
XBOX_360_SYSTEM_CRASH_RESERVED
EVENT_SRV_SERVICE_FAILED - 0xC00007D0 - (2000)
The server's call to a system service failed unexpectedly.
EVENT_SRV_RESOURCE_SHORTAGE - 0xC00007D1 - (2001)
The server was unable to perform an operation due to a shortage of available resources.
EVENT_SRV_CANT_CREATE_DEVICE - 0xC00007D2 - (2002)
The server could not create its device. The server could not be started.
EVENT_SRV_CANT_CREATE_PROCESS - 0xC00007D3 - (2003)
The server could not create a process. The server could not be started.
EVENT_SRV_CANT_CREATE_THREAD - 0xC00007D4 - (2004)
The server could not create a startup thread. The server could not be started.
EVENT_SRV_UNEXPECTED_DISC - 0xC00007D5 - (2005)
The server received an unexpected disconnection from a client.
EVENT_SRV_INVALID_REQUEST - 0xC00007D6 - (2006)
The server received an incorrectly formatted request from %2.
EVENT_SRV_CANT_OPEN_NPFS - 0xC00007D7 - (2007)
The server could not open the named pipe file system. Remote named pipes are disabled.
EVENT_SRV_CANT_GROW_TABLE - 0x800007D9 - (2009)
The server could not expand a table because the table reached the maximum size.
EVENT_SRV_CANT_START_SCAVENGER - 0xC00007DA - (2010)
The server could not start the scavenger thread. The server could not be started.
EVENT_SRV_IRP_STACK_SIZE - 0xC00007DB - (2011)
The server's configuration parameter "irpstacksize" is too small for the server to use a local device. Please increase the value of this parameter.
EVENT_SRV_NETWORK_ERROR - 0x800007DC - (2012)
While transmitting or receiving data, the server encountered a network error. Occasional errors are expected, but large amounts of these indicate a possible error in your network configuration. The error status code is contained within the returned data (formatted as Words) and may point you towards the problem.
EVENT_SRV_DISK_FULL - 0x800007DD - (2013)
The %2 disk is at or near capacity. You may need to delete some files.
EVENT_SRV_NO_VIRTUAL_MEMORY - 0xC00007E0 - (2016)
The server was unable to allocate virtual memory.
EVENT_SRV_NONPAGED_POOL_LIMIT - 0xC00007E1 - (2017)
The server was unable to allocate from the system nonpaged pool because the server reached the configured limit for nonpaged pool allocations.
EVENT_SRV_PAGED_POOL_LIMIT - 0xC00007E2 - (2018)
The server was unable to allocate from the system paged pool because the server reached the configured limit for paged pool allocations.
EVENT_SRV_NO_NONPAGED_POOL - 0xC00007E3 - (2019)
The server was unable to allocate from the system nonpaged pool because the pool was empty.
EVENT_SRV_NO_PAGED_POOL - 0xC00007E4 - (2020)
The server was unable to allocate from the system paged pool because the pool was empty.
EVENT_SRV_NO_WORK_ITEM - 0x800007E5 - (2021)
The server was unable to allocate a work item %2 times in the last %3 seconds.
EVENT_SRV_NO_FREE_CONNECTIONS - 0x800007E6 - (2022)
The server was unable to find a free connection %2 times in the last %3 seconds. This indicates a spike in network traffic. If this is happening frequently, you should consider increasing the minimum number of free connections to add headroom. To do that, modify the MinFreeConnections and MaxFreeConnections for the LanmanServer in the registry.
EVENT_SRV_NO_FREE_RAW_WORK_ITEM - 0x800007E7 - (2023)
The server was unable to find a free raw work item %2 times in the last %3 seconds.
EVENT_SRV_NO_BLOCKING_IO - 0x800007E8 - (2024)
The server was unable to allocate resources for blocking I/O %2 times in the last %3 seconds.
EVENT_SRV_DOS_ATTACK_DETECTED - 0x800007E9 - (2025)
The server has detected an attempted Denial-Of-Service attack from client %2, and has disconnected the connection.
EVENT_SRV_TOO_MANY_DOS - 0x800007EA - (2026)
The server has detected too many Denial-Of-Service attacks and will stop logging events for any more of them. Be advised it is likely someone is actively attacking your machine.
EVENT_SRV_OUT_OF_WORK_ITEM_DOS - 0x800007EB - (2027)
The server has detected a potential Denial-of-Service attack caused by consuming all the work-items. Some connections were disconnected to protect against this. If this is not the case, please raise the MaxWorkItems for the server or disable DoS detection. This event will not be logged again for 24 hours.
EVENT_SRV_KEY_NOT_FOUND - 0xC00009C5 - (2501)
The server's Registry key %1 was not present. The server could not start.
EVENT_SRV_KEY_NOT_CREATED - 0xC00009C6 - (2502)
The server's Registry key %1 was not present and could not be created. The server could not start.
EVENT_SRV_NO_TRANSPORTS_BOUND - 0xC00009C7 - (2503)
The server did not bind to any transports. The server could not start.
EVENT_SRV_CANT_BIND_TO_TRANSPORT - 0x800009C8 - (2504)
The server could not bind to the transport %1.
EVENT_SRV_CANT_BIND_DUP_NAME - 0xC00009C9 - (2505)
The server could not bind to the transport %1 because another computer on the network has the same name. The server could not start.
EVENT_SRV_INVALID_REGISTRY_VALUE - 0x800009CA - (2506)
The value named %1 in the server's registry key %2 was not valid, and was ignored. If you want to change the value, change it to one that is the correct type and is within the acceptable range, or delete the value to use the default. This value might have been set up by an older program that did not use the correct boundaries.
EVENT_SRV_INVALID_SD - 0x800009CB - (2507)
The security descriptor stored in the Registry for the share %1 was invalid. The share was not automatically recreated.
EVENT_SRV_CANT_LOAD_DRIVER - 0x800009CC - (2508)
The server service was unable to load the server driver.
EVENT_SRV_CANT_UNLOAD_DRIVER - 0x800009CD - (2509)
The server service was unable to unload the server driver.
EVENT_SRV_CANT_MAP_ERROR - 0x800009CE - (2510)
The server service was unable to map error code %1.
EVENT_SRV_CANT_RECREATE_SHARE - 0x800009CF - (2511)
The server service was unable to recreate the share %1 because the directory %2 no longer exists. Please run "net share %1 /delete" to delete the share, or recreate the directory %2.
EVENT_SRV_CANT_CHANGE_DOMAIN_NAME - 0x800009D0 - (2512)
The server service was unable to change the domain name from %1 to %2.
EVENT_SRV_TXF_INIT_FAILED - 0x800009D1 - (2513)
The server service was unable to register to the transaction resource manager. Remote transactions will be unavailable.
EVENT_RDR_RESOURCE_SHORTAGE - 0x80000BB9 - (3001)
The redirector was unable to allocate memory.
EVENT_RDR_CANT_CREATE_DEVICE - 0x80000BBA - (3002)
The redirector could not create its device. The redirector could not be started.
EVENT_CONFIG_ERROR - 0xC0000BBB - (3003)
A configuration error occurred.%1
EVENT_RDR_CANT_CREATE_THREAD - 0x80000BBB - (3003)
The redirector could not create a system thread.
EVENT_RDR_CANT_SET_THREAD - 0x80000BBC - (3004)
The redirector could not set the priority for a system thread.
EVENT_RDR_INVALID_REPLY - 0x80000BBD - (3005)
The redirector received an incorrectly formatted response from %2.
EVENT_GATHERSVC_PERFMON - 0xC0000BBE - (3006)
Performance monitoring cannot be initialized for the gatherer service, because the counters are not loaded or the shared memory object cannot be opened. This only affects availability of the perfmon counters. Restart the computer.%1
EVENT_RDR_INVALID_SMB - 0x80000BBE - (3006)
The redirector received an SMB that was too short.
EVENT_GATHERER_PERFMON - 0xC0000BBF - (3007)
Performance monitoring cannot be initialized for the gatherer object, because the counters are not loaded or the shared memory object cannot be opened. This only affects availability of the perfmon counters. Restart the computer.%1
EVENT_RDR_INVALID_LOCK_REPLY - 0x80000BBF - (3007)
The redirector received an incorrect response from %2 to a lock request.
EVENT_HASHMAP_INSERT - 0xC0000BC0 - (3008)
The entry <%2> cannot be inserted into the history.%1
EVENT_TRANSLOG_CREATE_TRX - 0xC0000BC1 - (3009)
The transaction object cannot be created.%1
EVENT_RDR_FAILED_UNLOCK - 0x80000BC1 - (3009)
The redirector failed to unlock part of a file on server %2.
EVENT_TRANSLOG_APPEND - 0xC0000BC2 - (3010)
The transaction cannot be appended to the queue. File: %2.%1
EVENT_TRANSLOG_UPDATE - 0xC0000BC3 - (3011)
The transaction cannot be updated in the queue. File: %2.%1
EVENT_RDR_CLOSE_BEHIND - 0x80000BC3 - (3011)
The redirector failed to write data to server %2 after the file was closed.
EVENT_RDR_UNEXPECTED_ERROR - 0x80000BC4 - (3012)
An unexpected network error has occurred on the virtual circuit to %2.
EVENT_HASHMAP_UPDATE - 0xC0000BC5 - (3013)
The entry <%2> in the hash map cannot be updated.%1
EVENT_RDR_TIMEOUT - 0x80000BC5 - (3013)
The redirector has timed out a request to %2.
EVENT_GATHER_EXCEPTION - 0xC0000BC6 - (3014)
An exception occurred. ID: %2. This is an internal error. Reproduce the error with the debugger attached and enable exceptions, then contact product support. One of the components loaded in your system is bad. You may be able to avoid the problem by recreating the index.%1
EVENT_RDR_INVALID_OPLOCK - 0x80000BC6 - (3014)
The redirector received an invalid oplock level from %2.
EVENT_TRANSACTION_READ - 0xC0000BC7 - (3015)
The transaction file cannot be read.%1
EVENT_RDR_CONNECTION_REFERENCE - 0x80000BC7 - (3015)
The redirector dereferenced a connection through zero.
EVENT_RDR_SERVER_REFERENCE - 0x80000BC8 - (3016)
The redirector dereferenced a server through zero.
EVENT_RDR_SMB_REFERENCE - 0x80000BC9 - (3017)
The redirector dereferenced the allocated SMB count through zero.
EVENT_GATHER_END_CRAWL - 0x40000BCA - (3018)
The update is complete. The gatherer successfully processed %2 documents totaling %3K. It failed to filter %4 documents. %5 documents were modified. %6 URLs were not found or denied access.%1
EVENT_RDR_ENCRYPT - 0x80000BCA - (3018)
The redirector accessed a share-level server that indicates it encrypts passwords. This combination is not supported.
EVENT_GATHER_START_CRAWL - 0x40000BCB - (3019)
The update started.%1
EVENT_RDR_CONNECTION - 0x80000BCB - (3019)
The redirector failed to determine the connection type.
EVENT_GATHER_INTERNAL - 0xC0000BCC - (3020)
Internal gatherer error %2 occurred. Please contact Microsoft Product Support Services.%1
EVENT_RDR_MAXCMDS - 0x80000BCD - (3021)
The redirector failed to allocate a multiplex table entry. This indicates that the MAXCMDS parameter to the redirector is insufficient for the users needs.
EVENT_RDR_OPLOCK_SMB - 0x80000BCE - (3022)
The redirector failed to allocate a buffer for an oplock break.
EVENT_GATHER_CRAWL_NOT_STARTED - 0x80000BCF - (3023)
The update cannot be started because all of the content sources were excluded by site path rules, or removed from the index configuration.%1
EVENT_RDR_DISPOSITION - 0x80000BCF - (3023)
The redirector failed to map the requested file disposition (for NtCreateFile).
EVENT_GATHER_CRAWL_SEED_ERROR - 0x80000BD0 - (3024)
The update cannot be started because the content sources cannot be accessed. Fix the errors and try the update again.%1
EVENT_RDR_CONTEXTS - 0x80000BD0 - (3024)
The redirector is allocating additional resources for input/output request packet contexts. This is probably caused by a resource leak in the redirector.
EVENT_GATHER_CRITICAL_ERROR - 0xC0000BD1 - (3025)
Critical error %2 occurred, and the index was shut down. The system is probably low on resources. Free up resources and restart the service.%1
EVENT_RDR_WRITE_BEHIND_FLUSH_FAILED - 0x80000BD1 - (3025)
A write-behind operation has failed to the remote server %2. The data contains the amount requested to write and the amount actually written.
EVENT_GATHER_ADVISE_FAILED - 0xC0000BD2 - (3026)
Advise Status Change failed. The system is probably low on resources. Free up resources and restart the service.%1
EVENT_RDR_AT_THREAD_MAX - 0x80000BD2 - (3026)
The redirector was unable to create a worker thread because it has already created the maximum number of configured work threads.
EVENT_GATHER_TRANSACTION_FAIL - 0xC0000BD3 - (3027)
The URL <%2> cannot be crawled.%1
EVENT_RDR_CANT_READ_REGISTRY - 0x80000BD3 - (3027)
The redirector was unable to initialize variables from the Registry.
EVENT_GATHER_OBJ_INIT_FAILED - 0xC0000BD4 - (3028)
The gatherer object cannot be initialized.%1
EVENT_RDR_TIMEZONE_BIAS_TOO_LARGE - 0x80000BD4 - (3028)
The time zone bias calculated between %2 and the current workstation is too large. The data specifies the number of 100ns units between the workstation and server. Make sure that the time of day on the workstation and server are correct.
EVENT_GATHER_PLUGIN_INIT_FAILED - 0xC0000BD5 - (3029)
The plug-in in <%2> cannot be initialized.%1
EVENT_RDR_PRIMARY_TRANSPORT_CONNECT_FAILED - 0x80000BD5 - (3029)
The redirector has failed to connect to the server %2 on the primary transport. The data contains the error.
EVENT_GATHER_SERVICE_INIT - 0xC0000BD6 - (3030)
The gatherer service cannot be initialized.%1
EVENT_RDR_DELAYED_SET_ATTRIBUTES_FAILED - 0x80000BD6 - (3030)
The redirector was unable to update the file attributes on a file located on server %2. The data contains the name of the file.
EVENT_GATHER_CANT_CREATE_DOCID - 0xC0000BD7 - (3031)
A document ID cannot be allocated.%1
EVENT_RDR_DELETEONCLOSE_FAILED - 0x80000BD7 - (3031)
The redirector was unable to delete the file specified on server %2 when it was closed by the application. The data contains the name of the file.
EVENT_GATHER_CANT_DELETE_DOCID - 0xC0000BD8 - (3032)
A document ID cannot be freed.%1
EVENT_RDR_CANT_BIND_TRANSPORT - 0x80000BD8 - (3032)
The redirector was unable to register the domain %2 on to transport %3 for the following reason: %4. Transport has been taken offline.
EVENT_TRANSLOG_CREATE - 0xC0000BD9 - (3033)
A new queue file cannot be created.%1
EVENT_RDR_CANT_REGISTER_ADDRESS - 0x80000BD9 - (3033)
The redirector was unable to register the address for transport %3 for the following reason: %4. Transport has been taken offline.
EVENT_REG_VERSION - 0xC0000BDA - (3034)
The registry version does not match with the expected <%2>, or the registry cannot be accessed because the service account does not have the correct permissions. Uninstall the previous version before installing the new one.%1
EVENT_RDR_CANT_GET_SECURITY_CONTEXT - 0x80000BDA - (3034)
The redirector was unable to initialize security context or query context attributes.
EVENT_RDR_CANT_BUILD_SMB_HEADER - 0x80000BDB - (3035)
The redirector was unable to build SMB header.
EVENT_GATHER_CRAWL_SEED_FAILED - 0x80000BDC - (3036)
Crawl could not be completed on content source <%2>.%1
EVENT_RDR_SECURITY_SIGNATURE_MISMATCH - 0x80000BDC - (3036)
The redirector detected a security signature mismatch. The connection has been disconnected.
EVENT_GATHER_CRAWL_SEED_FAILED_INIT - 0x80000BDD - (3037)
Crawl could not be started on content source <%2>.%1
EVENT_GATHER_REG_MISSING - 0x80000BDE - (3038)
The gatherer is unable to read the registry %2.%1
EVENT_GATHER_CRAWL_IN_PROGRESS - 0x80000BDF - (3039)
A request to start the update has been ignored because the update is already in progress or is scheduled on one or more content sources.%1
EVENT_GATHER_LOCK_FAILED - 0xC0000BE0 - (3040)
The status change request %2 cannot be processed.%1
EVENT_GATHER_RESET_START - 0x40000BE1 - (3041)
The index is being reset.%1
EVENT_GATHER_START_PAUSE - 0x80000BE2 - (3042)
The index was paused.%1
EVENT_GATHER_THROTTLE - 0x40000BE3 - (3043)
The gatherer index was interrupted.%1
EVENT_GATHER_RESUME - 0x40000BE4 - (3044)
The gatherer index resumed.%1
EVENT_GATHER_AUTODESCLEN_ADJUSTED - 0x80000BE5 - (3045)
The automatic description length was adjusted from %2 to %3.%1
EVENT_GATHER_NO_CRAWL_SEEDS - 0x80000BE6 - (3046)
The update for the index cannot be started because the specified content sources were not configured for updates. Add at least one content source.%1
EVENT_GATHER_END_INCREMENTAL - 0x40000BE7 - (3047)
The incremental update is complete. The gatherer successfully processed %2 documents totaling %3K. It failed to filter %4 documents. %5 documents were modified. %6 URLs were not found or denied access.%1
EVENT_GATHER_FROM_NOT_SET - 0xC0000BE8 - (3048)
No documents were accessed because no e-mail address is specified in the content index server properties. Specify the e-mail address in the service configuration.%1
EVENT_GATHER_DELETING_HISTORY_ITEMS - 0xC0000BEA - (3050)
Unvisited items cannot be deleted from the history after a full update.%1
EVENT_GATHER_STOP_START - 0x40000BEC - (3052)
The crawl was requested to be stopped.%1
EVENT_GATHER_START_CRAWL_IF_RESET - 0x80000BED - (3053)
The previous update was reset, or was otherwise interrupted. A full update of all content sources will be automatically started. %1
EVENT_GATHER_DISK_FULL - 0x80000BEE - (3054)
The update has been delayed because a disk is full. Check the system default temp location and the drive on which search catalog is created. The system default temp location is used for creation of temporary files during crawling. If it is full, crawling pauses. If the system default temp location is full, change the location to a disk with more free space and restart the computer. Changes to the system temp location do not take effect for system services until the computer is restarted.%1
EVENT_GATHER_NO_SCHEMA - 0x80000BEF - (3055)
The gatherer property mapping file cannot be opened. The default values are being used. You may have to copy the property mapping file from the setup CD, or reinstall the application.%1
EVENT_GATHER_AUTODESCENCODE_INVALID - 0x80000BF0 - (3056)
The automatic description encoding tag value is invalid. The gatherer is setting this value to "yes"". Fix the gthrprm.txt file.%1
EVENT_GATHER_PLUGINMGR_INIT_FAILED - 0xC0000BF1 - (3057)
The plug-in manager <%2> cannot be initialized.%1
EVENT_GATHER_APP_INIT_FAILED - 0xC0000BF2 - (3058)
The application cannot be initialized.%1
EVENT_FAILED_INITIALIZE_CRAWL - 0xC0000BF3 - (3059)
The update cannot be initialized.%1
EVENT_CRAWL_SCHEDULED - 0x40000BF4 - (3060)
An update cannot begin because the content source <%2> is in use by another update already in progress. The update will start as soon as all its content sources are released by updates already in progress.%1
EVENT_FAILED_CREATE_GATHERER_LOG - 0x80000BF5 - (3061)
The gatherer log cannot be created.%1
EVENT_WBREAKER_NOT_LOADED - 0x80000BF6 - (3062)
The word breaker for language <%2> cannot be loaded.%1
EVENT_LEARN_PROPAGATION_COPY_FAILED - 0x80000BF7 - (3063)
Propagation failed while copying <%2> to <%3>.%1
EVENT_LEARN_CREATE_DB_FAILED - 0x80000BF8 - (3064)
The Topic Assistant training database could not be created.%1
EVENT_LEARN_COMPILE_FAILED - 0x80000BF9 - (3065)
The Topic Assistant training database could not be compiled.%1
EVENT_LEARN_PROPAGATION_FAILED - 0x80000BFA - (3066)
Propagation of the Topic Assistant training database to <%2:%3:%4> failed.%1
EVENT_GATHER_END_ADAPTIVE - 0x40000BFB - (3067)
The adaptive update is complete. The gatherer successfully processed %2 documents totaling %3K. It failed to filter %4 documents. %5 documents were modified. %6 URLs were not found or denied access.%1
EVENT_USING_DIFFERENT_WORD_BREAKER - 0x80000BFC - (3068)
The gatherer is using the word breaker for language id <%2> for text in language id <%3>. The corresponding language resources are not installed on your computer.%1
EVENT_GATHER_RESTORE_COMPLETE - 0x00000BFD - (3069)
The application was successfully restored.%1
EVENT_GATHER_RESTORE_ERROR - 0xC0000BFE - (3070)
The index cannot be restored. You may need to delete and recreate the index.%1
BC_BLUETOOTH_VERIFIER_FAULT - 0x00000BFE - (3070)
BC_BLUETOOTH_VERIFIER_FAULT
EVENT_AUTOCAT_PERFMON - 0xC0000BFF - (3071)
Performance monitoring cannot be initialized for the topic assistant object, because the counters are not loaded or the shared memory object cannot be opened. This only affects availability of the perfmon counters. Restart the computer.%1
BC_BTHMINI_VERIFIER_FAULT - 0x00000BFF - (3071)
BC_BTHMINI_VERIFIER_FAULT
EVENT_GATHER_DIRTY_STARTUP - 0x80000C00 - (3072)
The gatherer is recovering after an improper shutdown. This will delay availability of gathering functions, and may result in some noncritical data loss.%1
EVENT_GATHER_HISTORY_CORRUPTION_DETECTED - 0x80000C01 - (3073)
The gatherer detected pages in the history during recovery that cannot be read, and repaired them. However, statistical data for some URLs may have been lost. This can be caused by restarting a computer without first shutting down Windows, or by disk failure.%1
EVENT_GATHER_RESTOREAPP_ERROR - 0xC0000C02 - (3074)
The application restore failed. This can be caused by system errors (indicated by previously logged events), or a corrupt backup image (retry restore with valid backup image). %1
EVENT_GATHER_RESTOREAPP_COMPLETE - 0x00000C03 - (3075)
The application was successfully restored.%1
EVENT_GATHER_BACKUPAPP_ERROR - 0xC0000C04 - (3076)
The application cannot be backed up. You may be unable to restore from the backup image.%1
EVENT_GATHER_BACKUPAPP_COMPLETE - 0x00000C05 - (3077)
The application was successfully backed up.%1
EVENT_GATHER_DAEMON_TERMINATED - 0x80000C06 - (3078)
The Windows Search service stopped the Protocol Host process because it was consuming too many resources. A new Protocol Host process will be started. No user action is required.%1
EVENT_NOTIFICATION_FAILURE - 0xC0000C07 - (3079)
Notifications for the volume %2 are not active. %1
EVENT_NOTIFICATION_FAILURE_SCOPE_EXCEEDED_LOGGING - 0x80000C08 - (3080)
Notifications for the scope %2 are not active. The event logging threshold for this scope was exceeded. No further events will be sent for one hour. %1
EVENT_NOTIFICATION_RESTORED - 0x40000C09 - (3081)
Notifications for the scope %2 have been reactivated. %1
EVENT_NOTIFICATION_RESTORED_SCOPE_EXCEEDED_LOGGING - 0x80000C0A - (3082)
Notifications for the scope %2 were reactivated. The event logging threshold for this scope was exceeded. No further events will be sent for one hour. %1
EVENT_GATHER_PROTOCOLHANDLER_LOAD_FAILED - 0xC0000C0B - (3083)
The protocol handler %2 cannot be loaded. Error description: %3. %1
EVENT_GATHER_PROTOCOLHANDLER_INIT_FAILED - 0xC0000C0C - (3084)
Failed to load protocol handler %2. Error description: %3. %1
EVENT_GATHER_INVALID_NETWORK_ACCESS_ACCOUNT - 0xC0000C0D - (3085)
The application network access account is invalid. Update the account with a valid username and password. %1
EVENT_GATHER_SYSTEM_LCID_CHANGED - 0x80000C0E - (3086)
The system locale has changed. Existing data will be deleted and the index must be recreated.%1
EVENT_GATHER_FLUSH_FAILED - 0xC0000C0F - (3087)
The gatherer files cannot be flushed, and this action cannot be completed. The gatherer will attempt to flush files again. If the problem persists, restart the service, free system resources or verify that your hardware is working properly. %1
EVENT_GATHER_CHECKPOINT_FAILED - 0xC0000C10 - (3088)
The checkpoint record cannot be updated, and this action cannot be completed. The gatherer will attempt to update the checkpoint record again. If the problem persists, restart the service, free system resources or verify that your hardware is working properly. %1
EVENT_GATHER_SAVE_FAILED - 0xC0000C11 - (3089)
The gatherer files cannot be saved, and this action cannot be completed. The gatherer will attempt to save the files again. If the problem persists, restart the service, free system resources or verify that your hardware is working properly. %1
EVENT_GATHER_RESTORE_CHECKPOINT_FAILED - 0xC0000C12 - (3090)
The gatherer files from the previous checkpoint cannot be restored, and this action cannot be completed. The gatherer will attempt to restore the files again. If the problem persists, restart the service, free system resources or verify that your hardware is working properly. %1
EVENT_GATHER_READ_CHECKPOINT_FAILED - 0xC0000C13 - (3091)
The checkpoint record cannot be read, and this action cannot be completed. If the problem persists, restart the service, free system resources or verify that your hardware is working properly. %1
EVENT_GATHER_CHECKPOINT_CORRUPT - 0xC0000C14 - (3092)
The project cannot be initialized, because the checkpoint record cannot be read. The data structures on the disk will be reset. Verify that your hardware is working properly. %1
EVENT_GATHER_CHECKPOINT_FILE_MISSING - 0xC0000C15 - (3093)
The project cannot be initialized, because one of the checkpoint files is missing. The data structures on the disk will be reset. Check to see if someone is manually deleting files, and verify that your hardware is working properly. %1
EVENT_STS_INIT_SECURITY_FAILED - 0x80000C16 - (3094)
Security information was not obtained from server %2.%1
EVENT_LOCAL_GROUP_NOT_EXPANDED - 0x40000C17 - (3095)
The group %2\%3 contains %4 members. Groups over %5 members are not expanded. %1
EVENT_LOCAL_GROUPS_CACHE_FLUSHED - 0x40000C18 - (3096)
The local groups cache was flushed, because %2. %1
EVENT_GATHERER_DATASOURCE - 0xC0000C19 - (3097)
The gatherer did not connect to the SQLServer instance.%1
EVENT_AUTOCAT_CANT_CREATE_FILE_SHARE - 0xC0000C1A - (3098)
Unable to create file share to accept topic assistant training data. Reason: %2.%1
EVENT_NOTIFICATION_THREAD_EXIT_FAILED - 0xC0000C1B - (3099)
Unable to terminate notifications normally. Restart the service or contact Product Support.%1
EVENT_FILTER_HOST_NOT_INITIALIZED - 0xC0000C1C - (3100)
Unable to initialize the filter host process. Terminating.%1
EVENT_TCPIP6_STARTED - 0x40000C1C - (3100)
The Microsoft TCP/IP version 6 driver was started.
EVENT_FILTER_HOST_NOT_TERMINATED - 0xC0000C1D - (3101)
The filter host process could not be terminated.
EVENT_FILTERPOOL_ADD_FAILED - 0xC0000C1E - (3102)
The per-user filter pool for session %2 could not be added.%1
EVENT_FILTERPOOL_DELETE_FAILED - 0xC0000C1F - (3103)
The per-user filter pool for session %2 could not be removed.%1
EVENT_ENUMERATE_SESSIONS_FAILED - 0xC0000C20 - (3104)
Enumerating user sessions to generate filter pools failed.%1
EVENT_DETAILED_FILTERPOOL_ADD_FAILED - 0xC0000C21 - (3105)
The per-user filter pool for session %2 could not be added <%3,%4>.%1
EVENT_AUDIENCECOMPUTATION_CANNOTSTART - 0xC0000E11 - (3601)
The audience compilation process cannot start. The error code is "%2" .%1
EVENT_GATHER_RECOVERY_FAILURE - 0xC0000E12 - (3602)
Error ID %2 happened in Windows Search recovery stage, please restart the service. If this error persists, please recreate the index.%1
EVENT_STREAMS_STRLOG - 0xC0000FA0 - (4000)
%2
EVENT_STREAMS_ALLOCB_FAILURE - 0x80000FA1 - (4001)
Unable to allocate a %2 byte message.
EVENT_STREAMS_ALLOCB_FAILURE_CNT - 0x80000FA2 - (4002)
%2 message allocations have failed since initialization.
EVENT_STREAMS_ESBALLOC_FAILURE - 0x80000FA3 - (4003)
Unable to allocate a %2 byte external message.
EVENT_STREAMS_ESBALLOC_FAILURE_CNT - 0x80000FA4 - (4004)
%2 external message allocations have failed since initialization.
E_NOTEXIST - 0x80001000 - (4096)
E_DUPLICATE - 0x80001001 - (4097)
E_BADVERSION - 0x80001002 - (4098)
E_BADFILE - 0x80001003 - (4099)
E_BADFORMAT - 0x80001004 - (4100)
EVENT_TCPIP_CREATE_DEVICE_FAILED - 0xC0001004 - (4100)
Unable to create device object %2. Initialization failed.
E_NOPERMISSION - 0x80001005 - (4101)
EVENT_TCPIP_NO_RESOURCES_FOR_INIT - 0xC0001005 - (4101)
Unable to allocate required resources. Initialization failed.
MSG_CI_MASTER_MERGE_STARTED - 0x40001006 - (4102)
%1A master merge has started for catalog %2.
E_ASSERT - 0x80001006 - (4102)
MSG_CI_MASTER_MERGE_COMPLETED - 0x40001007 - (4103)
%1A master merge has completed for catalog %2.
E_INTERRUPT - 0x80001007 - (4103)
MSG_CI_MASTER_MERGE_ABORTED - 0x40001008 - (4104)
%1A master merge has been paused for catalog %2 due to error %3. It will be rescheduled later.
E_NOTSUPPORTED - 0x80001008 - (4104)
MSG_CI_MASTER_MERGE_CANT_START - 0xC0001009 - (4105)
%1A master merge cannot be started for catalog %2 due to error %3.
E_OUTOFRANGE - 0x80001009 - (4105)
MSG_CI_MASTER_MERGE_CANT_RESTART - 0xC000100A - (4106)
%1A master merge cannot be re-started for catalog %2 due to error %3.
E_GROUPIDTOOBIG - 0x8000100A - (4106)
E_TOOMANYTITLES - 0x8000100B - (4107)
E_NOMERGEDDATA - 0x8000100C - (4108)
E_NOTFOUND - 0x8000100D - (4109)
E_CANTFINDDLL - 0x8000100E - (4110)
E_NOHANDLE - 0x8000100F - (4111)
E_GETLASTERROR - 0x80001010 - (4112)
E_BADPARAM - 0x80001011 - (4113)
E_INVALIDSTATE - 0x80001012 - (4114)
E_ALREADYOPEN - 0x80001013 - (4115)
E_NOTOPEN - 0x80001013 - (4115)
E_UNKNOWN_TRANSPORT - 0x80001016 - (4118)
E_UNSUPPORTED_TRANSPORT - 0x80001017 - (4119)
E_BADFILTERSIZE - 0x80001018 - (4120)
MSG_CI_MASTER_MERGE_RESTARTED - 0x40001019 - (4121)
%1A master merge has restarted for catalog %2.
E_TOOMANYOBJECTS - 0x80001019 - (4121)
E_NAMETOOLONG - 0x80001020 - (4128)
MSG_CI_CORRUPT_INDEX_COMPONENT - 0x4000102A - (4138)
An index corruption was detected in component %2 in catalog %3.%1
E_FILECREATE - 0x80001030 - (4144)
E_FILECLOSE - 0x80001031 - (4145)
E_FILEREAD - 0x80001032 - (4146)
E_FILESEEK - 0x80001033 - (4147)
E_FILEWRITE - 0x80001034 - (4148)
E_FILEDELETE - 0x80001035 - (4149)
E_FILEINVALID - 0x80001036 - (4150)
E_FILENOTFOUND - 0x80001037 - (4151)
E_DISKFULL - 0x80001038 - (4152)
MSG_CI_MASTER_MERGE_ABORTED_LOW_DISK - 0x40001043 - (4163)
%1A master merge has been paused for catalog %2 due to low disk space. The merge will be rescheduled later. Please free some disk space for indexing to continue.
MSG_CI_MASTER_MERGE_REASON_EXTERNAL - 0x40001044 - (4164)
%1Catalog: %2. A master merge was started due to an external request.
MSG_CI_MASTER_MERGE_REASON_INDEX_LIMIT - 0x40001045 - (4165)
%1Catalog: %2. A master merge was started because the catalog reached the maximum number of indexes on the last level (%3).
MSG_CI_MASTER_MERGE_REASON_EXPECTED_DOCS - 0x40001046 - (4166)
%1Catalog: %2. A master merge was started because the expected number of documents in the catalog (%3) were indexed.
MSG_CI_MASTER_MERGE_REASON_NUMBER - 0x40001047 - (4167)
%1Catalog: %2. The master merge was started because of internal reason number %3.
MSG_CI_CREATE_SEVER_ITEM_FAILED - 0x80001048 - (4168)
%1 Unable to create the query engine's first request item due to error %2. It's possible that the MSFTESQL service account is invalid or the password has expired.
E_TOOMANYTOPICS - 0x80001050 - (4176)
E_TOOMANYDUPS - 0x80001051 - (4177)
E_TREETOOBIG - 0x80001052 - (4178)
E_BADBREAKER - 0x80001053 - (4179)
E_BADVALUE - 0x80001054 - (4180)
E_ALL_WILD - 0x80001055 - (4181)
E_TOODEEP - 0x80001056 - (4182)
E_EXPECTEDTERM - 0x80001057 - (4183)
E_MISSLPAREN - 0x80001058 - (4184)
E_MISSRPAREN - 0x80001059 - (4185)
EVENT_TCPIP_TOO_MANY_NETS - 0xC0001059 - (4185)
IP has been bound to more than the maximum number of supported interfaces. Some interfaces on network adapter %2 will not be initialized.
E_MISSQUOTE - 0x8000105A - (4186)
EVENT_TCPIP_NO_MASK - 0xC000105A - (4186)
No subnet mask was specified for interface %2. This interface and all subsequent interfaces on network adapter %3 cannot be initialized.
E_NULLQUERY - 0x8000105B - (4187)
EVENT_TCPIP_INVALID_ADDRESS - 0xC000105B - (4187)
An invalid address %2 was specified for network adapter %3. This interface cannot be initialized.
E_STOPWORD - 0x8000105C - (4188)
EVENT_TCPIP_INVALID_MASK - 0xC000105C - (4188)
An invalid subnet mask %2 was specified for address %3 on network adapter %4. This interface cannot be initialized.
E_BADRANGEOP - 0x8000105D - (4189)
EVENT_TCPIP_NO_ADAPTER_RESOURCES - 0xC000105D - (4189)
IP could not allocate some resources required to configure network adapter %2. Some interfaces on this network adapter will not be initialized.
E_UNMATCHEDTYPE - 0x8000105E - (4190)
EVENT_TCPIP_DHCP_INIT_FAILED - 0x8000105E - (4190)
IP was unable to initialize network adapter %2 for configuration by DHCP. If DHCP is enabled on this network adapter, the primary interface may not be configured properly. Interfaces on this network adapter not configured by DHCP will be unaffected.
E_WORDTOOLONG - 0x8000105F - (4191)
EVENT_TCPIP_ADAPTER_REG_FAILURE - 0xC000105F - (4191)
IP could not open the registry key for network adapter %2. Interfaces on this network adapter will not be initialized.
E_BADINDEXFLAGS - 0x80001060 - (4192)
EVENT_TCPIP_INVALID_DEFAULT_GATEWAY - 0x80001060 - (4192)
Invalid default gateway address %2 was specified for network adapter %3. Some remote networks may not be reachable as a result.
E_WILD_IN_DTYPE - 0x80001061 - (4193)
EVENT_TCPIP_NO_ADDRESS_LIST - 0xC0001061 - (4193)
Unable to read the configured IP addresses for network adapter %2. IP interfaces will not be initialized on this network adapter.
E_NOSTEMMER - 0x80001062 - (4194)
EVENT_TCPIP_NO_MASK_LIST - 0xC0001062 - (4194)
Unable to read the configured subnet masks for network adapter %2. IP interfaces will not be initialized on this network adapter.
EVENT_TCPIP_NO_BINDINGS - 0xC0001063 - (4195)
IP was unable to read its bindings from the registry. No network interfaces were configured.
EVENT_TCPIP_IP_INIT_FAILED - 0xC0001064 - (4196)
Initialization of IP failed.
EVENT_TCPIP_TOO_MANY_GATEWAYS - 0x80001065 - (4197)
More than the maximum number of default gateways were specified for network adapter %2. Some remote networks may not be reachable as a result.
EVENT_TCPIP_ADDRESS_CONFLICT1 - 0xC0001066 - (4198)
The system detected an address conflict for IP address %2 with the system having network hardware address %3. The local interface has been disabled.
EVENT_TCPIP_ADDRESS_CONFLICT2 - 0xC0001067 - (4199)
The system detected an address conflict for IP address %2 with the system having network hardware address %3. Network operations on this system may be disrupted as a result.
EVENT_TCPIP_NTE_CONTEXT_LIST_FAILURE - 0xC0001068 - (4200)
Unable to read or write the NTE Context list for network adapter %2. IP interfaces on this network adapter may not be initialized completely.
EVENT_TCPIP_MEDIA_CONNECT - 0x40001069 - (4201)
The system detected that network adapter %2 was connected to the network, and has initiated normal operation.
EVENT_TCPIP_MEDIA_DISCONNECT - 0x4000106A - (4202)
The system detected that network adapter %2 was disconnected from the network and its network configuration has been released. If the network adapter was not disconnected, this may indicate that it has malfunctioned. Try updating the driver for the network adapter.
EVENT_TCPIP_IPV4_UNINSTALLED - 0x4000106B - (4203)
The system detected that IPv4 is not installed. This may cause some networking services to fail to start, or to malfunction. To install IPv4, use "netsh interface ipv4 install".
EVENT_TCPIP_AUTOCONFIGURED_ADDRESS_LIMIT_REACHED - 0x8000106C - (4204)
Autoconfigured address limit has been reached. No further autoconfigured addresses will be added until the interface is reconnected.
EVENT_TCPIP_AUTOCONFIGURED_ROUTE_LIMIT_REACHED - 0x8000106D - (4205)
Autoconfigured route limit has been reached. No further autoconfigured routes will be added until the interface is reconnected.
E_MISSINGPROP - 0x80001080 - (4224)
E_PROPLISTNOTEMPTY - 0x80001081 - (4225)
EVENT_TCPIP_TCP_INIT_FAILED - 0xC0001081 - (4225)
Initialization of TCP/UDP failed.
E_PROPLISTEMPTY - 0x80001082 - (4226)
EVENT_TCPIP_TCP_CONNECT_LIMIT_REACHED - 0x80001082 - (4226)
TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts.
E_ALREADYINIT - 0x80001083 - (4227)
EVENT_TCPIP_TCP_TIME_WAIT_COLLISION - 0x80001083 - (4227)
TCP/IP failed to establish an outgoing connection because the selected local endpoint was recently used to connect to the same remote endpoint. This error typically occurs when outgoing connections are opened and closed at a high rate, causing all available local ports to be used and forcing TCP/IP to reuse a local port for an outgoing connection. To minimize the risk of data corruption, the TCP/IP standard requires a minimum time period to elapse between successive connections from a given local endpoint to a given remote endpoint.
E_NOTINIT - 0x80001084 - (4228)
EVENT_TCPIP_TCP_WSD_WS_RESTRICTED - 0x80001084 - (4228)
TCP/IP has chosen to restrict the scale factor due to a network condition. This could be related to a problem in a network device and will cause degraded throughput.
E_RESULTSETEMPTY - 0x80001085 - (4229)
EVENT_TCPIP_TCP_MPP_ATTACKS_DETECTED - 0x80001085 - (4229)
TCP/IP has detected high memory utilization and has terminated some existing connections to maintain system stability.
E_TOOMANYCOLUMNS - 0x80001086 - (4230)
EVENT_TCPIP_TCP_CONNECTIONS_PERF_IMPACTED - 0x80001086 - (4230)
TCP/IP has chosen to restrict the congestion window for several connections due to a network condition. This could be related to a problem in the TCP global or supplemental configuration and will cause degraded throughput.
E_NOKEYPROP - 0x80001087 - (4231)
EVENT_TCPIP_TCP_GLOBAL_EPHEMERAL_PORT_SPACE_EXHAUSTED - 0x80001087 - (4231)
A request to allocate an ephemeral port number from the global TCP port space has failed due to all such ports being in use.
EVENT_TCPIP_UDP_LIMIT_REACHED - 0x800010A9 - (4265)
Backlog of pending datagram sends reached. Please increase the value of Tcpip\Parameters\DGMaxSendFree in the registry.
EVENT_TCPIP_UDP_GLOBAL_EPHEMERAL_PORT_SPACE_EXHAUSTED - 0x800010AA - (4266)
A request to allocate an ephemeral port number from the global UDP port space has failed due to all such ports being in use.
EVENT_TCPIP_PCF_MULTICAST_OID_ISSUE - 0x800010C2 - (4290)
Multicast address list could not be set on the network adapter with hardware address %2 (%3 %4 %5 %6).
EVENT_TCPIP_PCF_MISSING_CAPABILITY - 0x800010C3 - (4291)
The network adapter with hardware address %2 has indicated packet coalescing capability without indicating support for one or more prerequisite receive filter capabilities (%3 %4).
EVENT_TCPIP_PCF_SET_FILTER_FAILURE - 0x800010C4 - (4292)
An attempt to set a packet coalescing filter on the network adapter with hardware address %2 has failed (%3 %4 %5).
EVENT_TCPIP_PCF_NO_ARP_FILTER - 0x800010C5 - (4293)
The ARP packet coalescing filter on the network adapter with hardware address %2 is not set since more than one IPv4 address is currently assigned to the adapter. An ARP packet coalescing filter may be set later when only one IPv4 address is assigned to this adapter (%3 %4).
EVENT_TCPIP_PCF_CLEAR_FILTER_FAILURE - 0xC00010C6 - (4294)
An attempt to clear a packet coalescing filter on the network adapter with hardware address %2 has failed (%3 %4 %5).
EVENT_NBT_CREATE_DRIVER - 0xC00010CC - (4300)
The driver could not be created.
EVENT_NBT_OPEN_REG_PARAMS - 0xC00010CD - (4301)
Unable to open the Registry Parameters to read configuration information.
EVENT_NBT_NO_BACKUP_WINS - 0x800010CE - (4302)
The backup WINS server address is not configured in the registry.
EVENT_NBT_NO_WINS - 0x800010CF - (4303)
The primary WINS server address is not configured in the registry.
EVENT_NBT_BAD_BACKUP_WINS_ADDR - 0x800010D0 - (4304)
The backup WINS server address is not formated correctly in the registry.
EVENT_NBT_BAD_PRIMARY_WINS_ADDR - 0x800010D1 - (4305)
The primary WINS server address is not formatted correctly in the registry.
EVENT_NBT_NAME_SERVER_ADDRS - 0xC00010D2 - (4306)
Unable to configure the addresses of the WINS servers.
EVENT_NBT_CREATE_ADDRESS - 0xC00010D3 - (4307)
Initialization failed because the transport refused to open initial addresses.
EVENT_NBT_CREATE_CONNECTION - 0xC00010D4 - (4308)
Initialization failed because the transport refused to open initial connections.
EVENT_NBT_NON_OS_INIT - 0xC00010D5 - (4309)
Data structure initialization failed.
EVENT_NBT_TIMERS - 0xC00010D6 - (4310)
Initialization failed because the timers could not be started.
EVENT_NBT_CREATE_DEVICE - 0xC00010D7 - (4311)
Initialization failed because the driver device could not be created. Use the string "%2" to identify the interface for which initialization failed. It represents the MAC address of the failed interface or the Globally Unique Interface Identifier (GUID) if NetBT was unable to map from GUID to MAC address. If neither the MAC address nor the GUID were available, the string represents a cluster device name.
EVENT_NBT_NO_DEVICES - 0x800010D8 - (4312)
There are no network adapters configured for this protocol stack.
EVENT_NBT_OPEN_REG_LINKAGE - 0xC00010D9 - (4313)
Unable to open the Registry Linkage to read configuration information.
EVENT_NBT_READ_BIND - 0xC00010DA - (4314)
Unable to read the driver's bindings to the transport from the registry.
EVENT_NBT_READ_EXPORT - 0xC00010DB - (4315)
Unable to read the driver's exported linkage configuration information.
EVENT_NBT_OPEN_REG_NAMESERVER - 0x800010DC - (4316)
Unable to open the registry to read the WINS server addresses.
EVENT_SCOPE_LABEL_TOO_LONG - 0x800010DD - (4317)
The Netbios Name Scope has a component longer than 63 characters. Each label in the Scope cannot be longer than 63 bytes.
EVENT_SCOPE_TOO_LONG - 0x800010DE - (4318)
The Netbios Name Scope is too long. The scope cannot be longer than 255 bytes.
EVENT_NBT_DUPLICATE_NAME - 0xC00010DF - (4319)
A duplicate name has been detected on the TCP network. The IP address of the computer that sent the message is in the data. Use nbtstat -n in a command window to see which name is in the Conflict state.
EVENT_NBT_NAME_RELEASE - 0xC00010E0 - (4320)
Another computer has sent a name release message to this computer, probably because a duplicate name has been detected on the TCP network. The IP address of the node that sent the message is in the data. Use nbtstat -n in a command window to see which name is in the Conflict state.
EVENT_NBT_DUPLICATE_NAME_ERROR - 0xC00010E1 - (4321)
The name "%2" could not be registered on the interface with IP address %3. The computer with the IP address %4 did not allow the name to be claimed by this computer.
EVENT_NBT_NO_RESOURCES - 0xC00010E2 - (4322)
NetBT failed to process a request because it encountered OutOfResources exception(s) in the last 1 hour.
EVENT_NDIS_RESOURCE_CONFLICT - 0xC0001388 - (5000)
%2 : Has encountered a conflict in resources and could not load.
EVENT_NDIS_OUT_OF_RESOURCE - 0xC0001389 - (5001)
%2 : Could not allocate the resources necessary for operation.
EVENT_NDIS_HARDWARE_FAILURE - 0xC000138A - (5002)
%2 : Has determined that the network adapter is not functioning properly.
EVENT_NDIS_ADAPTER_NOT_FOUND - 0xC000138B - (5003)
%2 : Could not find a network adapter.
EVENT_NDIS_INTERRUPT_CONNECT - 0xC000138C - (5004)
%2 : Could not connect to the interrupt number supplied.
EVENT_NDIS_DRIVER_FAILURE - 0xC000138D - (5005)
%2 : Has encountered an internal error and has failed.
EVENT_NDIS_BAD_VERSION - 0xC000138E - (5006)
%2 : The version number is incorrect for this driver.
EVENT_NDIS_TIMEOUT - 0x8000138F - (5007)
%2 : Timed out during an operation.
EVENT_NDIS_NETWORK_ADDRESS - 0xC0001390 - (5008)
%2 : Has encountered an invalid network address.
EVENT_NDIS_UNSUPPORTED_CONFIGURATION - 0xC0001391 - (5009)
%2 : Does not support the configuration supplied.
EVENT_NDIS_INVALID_VALUE_FROM_ADAPTER - 0xC0001392 - (5010)
%2 : The network adapter has returned an invalid value to the driver.
EVENT_NDIS_MISSING_CONFIGURATION_PARAMETER - 0xC0001393 - (5011)
%2 : A required parameter is missing from the registry.
EVENT_NDIS_BAD_IO_BASE_ADDRESS - 0xC0001394 - (5012)
%2 : The I/O base address supplied does not match the jumpers on the adapter.
EVENT_NDIS_RECEIVE_SPACE_SMALL - 0x40001395 - (5013)
%2 : The adapter is configured such that the receive space is smaller than the maximum packet size. Some packets may be lost.
EVENT_NDIS_ADAPTER_DISABLED - 0x80001396 - (5014)
%2 : The driver cannot function because the network adapter is disabled.
EVENT_NDIS_IO_PORT_CONFLICT - 0x80001397 - (5015)
%2 : There is an I/O port conflict.
EVENT_NDIS_PORT_OR_DMA_CONFLICT - 0x80001398 - (5016)
%2 : There is an I/O port or DMA channel conflict.
EVENT_NDIS_MEMORY_CONFLICT - 0x80001399 - (5017)
%2 : There is a memory conflict at address 0x%3.
EVENT_NDIS_INTERRUPT_CONFLICT - 0x8000139A - (5018)
%2 : There is a interrupt conflict at Interrupt %3.
EVENT_NDIS_DMA_CONFLICT - 0x8000139B - (5019)
%2 : There is a resource conflict at DMA channel %3.
EVENT_NDIS_INVALID_DOWNLOAD_FILE_ERROR - 0xC000139C - (5020)
%2 : The download file is invalid. The driver is unable to load.
EVENT_NDIS_MAXRECEIVES_ERROR - 0x8000139D - (5021)
%2 : The specified registry entry MaxReceives is out of range. Using default value.
EVENT_NDIS_MAXTRANSMITS_ERROR - 0x8000139E - (5022)
%2 : The specified registry entry MaxTransmits is out of range. Using default value
EVENT_NDIS_MAXFRAMESIZE_ERROR - 0x8000139F - (5023)
%2 : The specified registry entry MaxFrameSize is out of range. Using default value.
EVENT_NDIS_MAXINTERNALBUFS_ERROR - 0x800013A0 - (5024)
%2 : The specified registry entry MaxInternalBufs is out of range. Using default value.
EVENT_NDIS_MAXMULTICAST_ERROR - 0x800013A1 - (5025)
%2 : The specified registry entry MaxMulticast is out of range. Using default value.
EVENT_NDIS_PRODUCTID_ERROR - 0x800013A2 - (5026)
%2 : The specified registry entry ProductId is out of range. Using default value.
EVENT_NDIS_LOBE_FAILUE_ERROR - 0x800013A3 - (5027)
%2 : A Token Ring Lobe Wire Fault has occurred. Verify cable connections. The network adapter will continue to try to reinsert into the ring.
EVENT_NDIS_SIGNAL_LOSS_ERROR - 0x800013A4 - (5028)
%2 : The adapter had detected a loss of signal on the ring. The adapter will continue to try to reinsert back into the ring.
EVENT_NDIS_REMOVE_RECEIVED_ERROR - 0x800013A5 - (5029)
%2 : The adapter has received a request to deinsert from the ring. The adapter will continue to try to reinsert back into the ring.
EVENT_NDIS_TOKEN_RING_CORRECTION - 0x400013A6 - (5030)
%2 : The network adapter has successfully reinserted into the ring.
EVENT_NDIS_ADAPTER_CHECK_ERROR - 0xC00013A7 - (5031)
%2 : The network adapter has detected an Adapter Check as a result of an unrecoverable hardware or software error.
EVENT_NDIS_RESET_FAILURE_ERROR - 0x800013A8 - (5032)
%2 : The network adapter failed to reset within a specified time, which could be caused by a hardware failure. The network adapter will continue to try to reset.
EVENT_NDIS_CABLE_DISCONNECTED_ERROR - 0x800013A9 - (5033)
%2 : The network adapter has detected that the token ring cable is disconnected from the network adapter. Please reconnect the cable.
EVENT_NDIS_RESET_FAILURE_CORRECTION - 0x800013AA - (5034)
%2 : The network adapter has successfully completed a previously failed reset.
EVENT_EventlogStarted - 0x80001775 - (6005)
The Event log service was started.
EVENT_EventlogStopped - 0x80001776 - (6006)
The Event log service was stopped.
EVENT_EventlogAbnormalShutdown - 0x80001778 - (6008)
The previous system shutdown at %1 on %2 was unexpected.
EVENT_EventLogProductInfo - 0x80001779 - (6009)
Microsoft (R) Windows (R) %1 %2 %3 %4.
EVENT_ComputerNameChange - 0x8000177B - (6011)
The NetBIOS name and DNS host name of this machine have been changed from %1 to %2.
EVENT_DNSDomainNameChange - 0x8000177C - (6012)
The DNS domain assigned to this computer has been changed from %1 to %2.
EVENT_EventlogUptime - 0x8000177D - (6013)
The system uptime is %5 seconds.
EVENT_UP_DRIVER_ON_MP - 0xC00017D4 - (6100)
A uniprocessor-specific driver was loaded on a multiprocessor system. The driver could not load.
EVENT_INDEXER_STARTED - 0x40001B58 - (7000)
The content index service started successfully.%1
EVENT_SERVICE_START_FAILED - 0xC0001B58 - (7000)
The %1 service failed to start due to the following error: %n%2
EVENT_INDEXER_SCHEMA_COPY_ERROR - 0xC0001B59 - (7001)
The schema file <%2> cannot be copied to <%3>.%1
EVENT_SERVICE_START_FAILED_II - 0xC0001B59 - (7001)
The %1 service depends on the %2 service which failed to start because of the following error: %n%3
EVENT_SERVICE_START_FAILED_GROUP - 0xC0001B5A - (7002)
The %1 service depends on the %2 group and no member of this group started.
EVENT_SERVICE_START_FAILED_NONE - 0xC0001B5B - (7003)
The %1 service depends on the following nonexistent service: %2
EVENT_CALL_TO_FUNCTION_FAILED - 0xC0001B5D - (7005)
The %1 call failed with the following error: %n%2
EVENT_CALL_TO_FUNCTION_FAILED_II - 0xC0001B5E - (7006)
The %1 call failed for %2 with the following error: %n%3
EVENT_REVERTED_TO_LASTKNOWNGOOD - 0xC0001B5F - (7007)
The system reverted to its last known good configuration. The system is restarting....
EVENT_BAD_ACCOUNT_NAME - 0xC0001B60 - (7008)
No backslash is in the account name.
EVENT_CONNECTION_TIMEOUT - 0xC0001B61 - (7009)
Timeout (%1 milliseconds) waiting for the %2 service to connect.
EVENT_INDEXER_INIT_ERROR - 0xC0001B62 - (7010)
The index cannot be initialized.%1
EVENT_READFILE_TIMEOUT - 0xC0001B62 - (7010)
Timeout (%1 milliseconds) waiting for ReadFile.
EVENT_INDEXER_INVALID_DIRECTORY - 0xC0001B63 - (7011)
Directory location <%2> is invalid. The application configuration cannot be read. Reinstall the application.%1
EVENT_TRANSACT_TIMEOUT - 0xC0001B63 - (7011)
Timeout (%1 milliseconds) waiting for a transaction response from the %2 service.
EVENT_INDEXER_PROP_ERROR - 0xC0001B64 - (7012)
An error occurred while propagating to search server <%2>.%1
EVENT_TRANSACT_INVALID - 0xC0001B64 - (7012)
Message returned in transaction has incorrect size.
EVENT_INDEXER_PAUSED_FOR_DISKFULL - 0xC0001B65 - (7013)
The update was paused because the disk <%2> is full. Free up disk space to continue crawling the index.%1
EVENT_FIRST_LOGON_FAILED - 0xC0001B65 - (7013)
Logon attempt with current password failed with the following error: %n%1
EVENT_SECOND_LOGON_FAILED - 0xC0001B66 - (7014)
Second logon attempt with old password also failed with the following error: %n%1
EVENT_INDEXER_PROP_STOPPED - 0x80001B67 - (7015)
Index propagation to search server <%2> was stopped by a user.%1
EVENT_INVALID_DRIVER_DEPENDENCY - 0xC0001B67 - (7015)
Boot-start or system-start driver (%1) must not depend on a service.
EVENT_INDEXER_PROP_SUCCEEDED - 0x00001B68 - (7016)
Index propagation to search server <%2> succeeded. The service is now waiting for the search server to accept the propagation.%1
EVENT_BAD_SERVICE_STATE - 0xC0001B68 - (7016)
The %1 service has reported an invalid current state %2.
EVENT_INDEXER_PROP_STARTED - 0x40001B69 - (7017)
Index propagation to search server <%2> started.%1
EVENT_CIRCULAR_DEPENDENCY_DEMAND - 0xC0001B69 - (7017)
Detected circular dependencies demand starting %1.
EVENT_INDEXER_NO_SEARCH_SERVERS - 0x80001B6A - (7018)
There are no search servers selected. Reconfigure the index to identify a suitable search server. If the problem persists, delete and recreate the index.%1
EVENT_CIRCULAR_DEPENDENCY_AUTO - 0xC0001B6A - (7018)
Detected circular dependencies auto-starting services.
EVENT_INDEXER_ADD_DSS_SUCCEEDED - 0x00001B6B - (7019)
The search server <%2> was successfully added.%1
EVENT_DEPEND_ON_LATER_SERVICE - 0xC0001B6B - (7019)
Circular dependency: The %1 service depends on a service in a group which starts later.
EVENT_INDEXER_REMOVE_DSS_SUCCEEDED - 0x00001B6C - (7020)
The search server <%2> was successfully removed.%1
EVENT_DEPEND_ON_LATER_GROUP - 0xC0001B6C - (7020)
Circular dependency: The %1 service depends on a group which starts later.
EVENT_INDEXER_ADD_DSS_FAILED - 0x80001B6D - (7021)
The search server <%2> cannot be added.%1
EVENT_SEVERE_SERVICE_FAILED - 0xC0001B6D - (7021)
About to revert to the last known good configuration because the %1 service failed to start.
EVENT_SERVICE_START_HUNG - 0xC0001B6E - (7022)
The %1 service hung on starting.
EVENT_INDEXER_REMOVE_DSS_FAILED - 0xC0001B6F - (7023)
The search server <%2> cannot be removed.%1
EVENT_SERVICE_EXIT_FAILED - 0xC0001B6F - (7023)
The %1 service terminated with the following error: %n%2
EVENT_INDEXER_DSS_CONTACT_FAILED - 0xC0001B70 - (7024)
Failed to inform the search server <%2> about a propagation error.%1
EVENT_SERVICE_EXIT_FAILED_SPECIFIC - 0xC0001B70 - (7024)
The %1 service terminated with service-specific error %2.
EVENT_SERVICE_START_AT_BOOT_FAILED - 0xC0001B71 - (7025)
At least one service or driver failed during system startup. Use Event Viewer to examine the event log for details.
EVENT_BOOT_SYSTEM_DRIVERS_FAILED - 0xC0001B72 - (7026)
The following boot-start or system-start driver(s) failed to load: %1
EVENT_INDEXER_BUILD_FAILED - 0xC0001B73 - (7027)
The index cannot be copied, and propagation cannot start.%1
EVENT_RUNNING_LASTKNOWNGOOD - 0xC0001B73 - (7027)
Windows could not be started as configured. A previous working configuration was used instead.
EVENT_INDEXER_REG_MISSING - 0xC0001B74 - (7028)
The content index server cannot read the registry.%1
EVENT_TAKE_OWNERSHIP - 0xC0001B74 - (7028)
The %1 Registry key denied access to SYSTEM account programs so the Service Control Manager took ownership of the Registry key.
TITLE_SC_MESSAGE_BOX - 0xC0001B75 - (7029)
Service Control Manager %0
EVENT_SERVICE_NOT_INTERACTIVE - 0xC0001B76 - (7030)
The %1 service is marked as an interactive service. However, the system is configured to not allow interactive services. This service may not function properly.
EVENT_SERVICE_CRASH - 0xC0001B77 - (7031)
The %1 service terminated unexpectedly. It has done this %2 time(s). The following corrective action will be taken in %3 milliseconds: %5.
EVENT_SERVICE_RECOVERY_FAILED - 0xC0001B78 - (7032)
The Service Control Manager tried to take a corrective action (%2) after the unexpected termination of the %3 service, but this action failed with the following error: %n%4
EVENT_SERVICE_SCESRV_FAILED - 0xC0001B79 - (7033)
The Service Control Manager did not initialize successfully. The security configuration server (scesrv.dll) failed to initialize with error %1. The system is restarting...
EVENT_SERVICE_CRASH_NO_ACTION - 0xC0001B7A - (7034)
The %1 service terminated unexpectedly. It has done this %2 time(s).
EVENT_SERVICE_CONTROL_SUCCESS - 0x40001B7B - (7035)
The %1 service was successfully sent a %2 control.
EVENT_SERVICE_STATUS_SUCCESS - 0x40001B7C - (7036)
The %1 service entered the %2 state.
EVENT_INDEXER_PROPSTORE_INIT_FAILED - 0xC0001B7D - (7037)
The property store was not initialized.%1
EVENT_SERVICE_CONFIG_BACKOUT_FAILED - 0xC0001B7D - (7037)
The Service Control Manager encountered an error undoing a configuration change to the %1 service. The service's %2 is currently in an unpredictable state. If you do not correct this configuration, you may not be able to restart the %1 service or may encounter other errors. To ensure that the service is configured properly, use the Services snap-in in Microsoft Management Console (MMC).
EVENT_FIRST_LOGON_FAILED_II - 0xC0001B7E - (7038)
The %1 service was unable to log on as %2 with the currently configured password due to the following error: %n%3%n%nTo ensure that the service is configured properly, use the Services snap-in in Microsoft Management Console (MMC).
EVENT_INDEXER_CI_LOAD_ERROR - 0xC0001B7F - (7039)
The content index cannot be loaded.%1
EVENT_SERVICE_DIFFERENT_PID_CONNECTED - 0x80001B7F - (7039)
A service process other than the one launched by the Service Control Manager connected when starting the %1 service. The Service Control Manager launched process %2 and process %3 connected instead.%n%n Note that if this service is configured to start under a debugger, this behavior is expected.
EVENT_INDEXER_RESET_FOR_CORRUPTION - 0xC0001B80 - (7040)
The search service has detected corrupted data files in the index {id=%2}. The service will attempt to automatically correct this problem by rebuilding the index.%1
EVENT_SERVICE_START_TYPE_CHANGED - 0x40001B80 - (7040)
The start type of the %1 service was changed from %2 to %3.
EVENT_SERVICE_LOGON_TYPE_NOT_GRANTED - 0xC0001B81 - (7041)
The %1 service was unable to log on as %2 with the currently configured password due to the following error: %nLogon failure: the user has not been granted the requested logon type at this computer.%n %nService: %1 %nDomain and account: %2%n %nThis service account does not have the necessary user right "Log on as a service."%n %nUser Action%n %nAssign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster.%n %nIf you have already assigned this user right to the service account, and the user right appears to be removed, a Group Policy object associated with this node might be removing the right. Check with your domain administrator to find out if this is happening.
EVENT_INDEXER_SHUTDOWN - 0x40001B82 - (7042)
The Windows Search Service is being stopped because there is a problem with the indexer: %2.%1
EVENT_SERVICE_STOP_SUCCESS_WITH_REASON - 0x40001B82 - (7042)
The %1 service was successfully sent a %2 control.%n%n The reason specified was: %3 [%4]%n%n Comment: %5
EVENT_INDEXER_LOAD_FAIL - 0xC0001B83 - (7043)
The index cannot be loaded.%1
EVENT_SERVICE_SHUTDOWN_FAILED - 0xC0001B83 - (7043)
The %1 service did not shutdown properly after receiving a preshutdown control.
EVENT_INDEXER_PROP_STATE_CORRUPT - 0xC0001B84 - (7044)
Propagation stopped because the propagation state for search server <%2> cannot be read. Try propagation again. If this error persists, delete and recreate the propagated index.%1
EVENT_INDEXER_DSS_ALREADY_ADDED - 0x40001B86 - (7046)
The index already exists on search server <%2>.%1
EVENT_INDEXER_BUILD_START - 0x40001B88 - (7048)
The index is being copied to the drop location in preparation for propagation.%1
EVENT_INDEXER_BUILD_ENDED - 0x40001B89 - (7049)
The index was completely copied. The index will now be propagated.%1
EVENT_INDEXER_VERIFY_PROP_ACCOUNT - 0xC0001B90 - (7056)
The content index server received an "Access Denied"" error while propagating to the <%2> search server. This usually results from an incorrect configuration of the propagation account. Check that the propagation account is valid.%1
EVENT_INDEXER_ADD_DSS_DISCONNECT - 0x80001B97 - (7063)
Search server <%2> cannot be contacted. However, <%2> was successfully added as a propagation recipient.%1
EVENT_INDEXER_PERFMON - 0xC0001B98 - (7064)
Performance monitoring cannot be initialized because the counters are not loaded or the shared memory object cannot be opened. Stop and restart the search service. If this error continues, reinstall the application.%1
EVENT_INDEXER_MISSING_APP_DIRECTORY - 0xC0001B9A - (7066)
Configuration directory %2 is missing, and disaster recovery must be performed. If there are existing indexes, they must be restored from the last backup. If there is no backup of index data, then delete the catalogs and recreate them.%1
EVENT_INDEXER_REG_ERROR - 0xC0001B9C - (7068)
The registry cannot be read, possibly because the registry keys for this index are missing. You may have to delete and recreate the index %1.
EVENT_INDEXER_DSS_UNABLE_TO_REMOVE - 0xC0001B9D - (7069)
The content index %1 cannot be removed.
EVENT_INDEXER_NEW_PROJECT - 0xC0001B9E - (7070)
The Windows Search Service added catalog %1
EVENT_INDEXER_REMOVED_PROJECT - 0xC0001B9F - (7071)
The Windows Search Service removed index %1
EVENT_INDEXER_PROP_COMMITTED - 0x40001BA2 - (7074)
Index propagation was committed to at least one target search server.%1
EVENT_INDEXER_PROP_ABORTED - 0x40001BA3 - (7075)
Index propagation stopped.%1
EVENT_DSS_NOT_ENABLED - 0x80001BA4 - (7076)
The search server <%2> cannot be brought online.%1
EVENT_INDEXER_PROP_COMMIT_FAILED - 0xC0001BA5 - (7077)
Index propagation failed to commit to any of the search servers. The Windows Search Service is now trying to revert the search servers to the previous index. %1
EVENT_COMMAND_NOT_INTERACTIVE - 0xC0001EDC - (7900)
The %1 command is marked as an interactive command. However, the system is configured to not allow interactive command execution. This command may not function properly.
EVENT_COMMAND_START_FAILED - 0xC0001EDD - (7901)
The %1 command failed to start due to the following error: %n%2
EVENT_BOWSER_OTHER_MASTER_ON_NET - 0xC0001F43 - (8003)
The master browser has received a server announcement from the computer %2 that believes that it is the master browser for the domain on transport %3. The master browser is stopping or an election is being forced.
EVENT_BOWSER_PROMOTED_WHILE_ALREADY_MASTER - 0x80001F44 - (8004)
A request has been submitted to promote the computer to backup when it is already a master browser.
EVENT_BOWSER_NON_MASTER_MASTER_ANNOUNCE - 0x80001F45 - (8005)
The browser has received a server announcement indicating that the computer %2 is a master browser, but this computer is not a master browser.
EVENT_BOWSER_ILLEGAL_DATAGRAM - 0x80001F46 - (8006)
The browser has received an illegal datagram from the remote computer %2 to name %3 on transport %4. The data is the datagram.
EVENT_BROWSER_STATUS_BITS_UPDATE_FAILED - 0xC0001F47 - (8007)
The browser was unable to update the service status bits. The data is the error.
EVENT_BROWSER_ROLE_CHANGE_FAILED - 0xC0001F48 - (8008)
The browser was unable to update its role. The data is the error.
EVENT_BROWSER_MASTER_PROMOTION_FAILED - 0xC0001F49 - (8009)
The browser was unable to promote itself to master browser. The computer that currently believes it is the master browser is %1.
EVENT_BOWSER_NAME_CONVERSION_FAILED - 0xC0001F4A - (8010)
The browser driver was unable to convert a character string to a unicode string.
EVENT_BROWSER_OTHERDOMAIN_ADD_FAILED - 0xC0001F4B - (8011)
The browser was unable to add the configuration parameter %1.
EVENT_BOWSER_ELECTION_RECEIVED - 0x00001F4C - (8012)
The browser driver has received an election packet from computer %2 on network %3. The data is the packet received.
EVENT_BOWSER_ELECTION_SENT_GETBLIST_FAILED - 0x40001F4D - (8013)
The browser driver has forced an election on network %2 because it was unable to find a master browser to retrieve a backup list on that network.
EVENT_BOWSER_ELECTION_SENT_FIND_MASTER_FAILED - 0x40001F4E - (8014)
The browser driver has forced an election on network %2 because it was unable to find a master browser for that network.
EVENT_BROWSER_ELECTION_SENT_LANMAN_NT_STARTED - 0x40001F4F - (8015)
The browser has forced an election on network %1 because a Windows Server (or domain master) browser is started.
EVENT_BOWSER_ILLEGAL_DATAGRAM_THRESHOLD - 0xC0001F50 - (8016)
The browser driver has received too many illegal datagrams from the remote computer %2 to name %3 on transport %4. The data is the datagram. No more events will be generated until the reset frequency has expired.
EVENT_BROWSER_DEPENDANT_SERVICE_FAILED - 0xC0001F51 - (8017)
The browser has failed to start because the dependent service %1 had invalid service status %2. Status Meaning 1 Service Stopped%n 2 Start Pending%n 3 Stop Pending%n 4 Running%n 5 Continue Pending%n 6 Pause Pending%n 7 Paused%n
EVENT_BROWSER_MASTER_PROMOTION_FAILED_STOPPING - 0xC0001F53 - (8019)
The browser was unable to promote itself to master browser. The browser will continue to attempt to promote itself to the master browser, but will no longer log any events in the event log in Event Viewer.
EVENT_BROWSER_MASTER_PROMOTION_FAILED_NO_MASTER - 0xC0001F54 - (8020)
The browser was unable to promote itself to master browser. The computer that currently believes it is the master browser is unknown.
EVENT_BROWSER_SERVER_LIST_FAILED - 0x80001F55 - (8021)
The browser service was unable to retrieve a list of servers from the browser master %1 on the network %2.%n %n Browser master: %1%n Network: %2%n %n This event may be caused by a temporary loss of network connectivity. If this message appears again, verify that the server is still connected to the network. The return code is in the Data text box.
EVENT_BROWSER_DOMAIN_LIST_FAILED - 0x80001F56 - (8022)
The browser service was unable to retrieve a list of domains from the browser master %1 on the network %2.%n %n Browser master: %1%n Network: %2%n %n This event may be caused by a temporary loss of network connectivity. If this message appears again, verify that the server is still connected to the network. The return code is in the Data text box.
EVENT_BROWSER_ILLEGAL_CONFIG - 0x80001F57 - (8023)
The value for the parameter %1 to the browser service was illegal.
EVENT_BOWSER_OLD_BACKUP_FOUND - 0x40001F58 - (8024)
The backup browser server %2 is out-of-date. Consider upgrading this computer.
EVENT_BROWSER_SERVER_LIST_RETRIEVED - 0x00001F59 - (8025)
The browser has retrieved a list of servers from remote computer %1 on transport %2.%n There were %3 entries read, and %4 total entries.
EVENT_BROWSER_DOMAIN_LIST_RETRIEVED - 0x00001F5A - (8026)
The browser has retrieved a list of domains from remote computer %1 on transport %2.%n There were %3 entries read, and %4 total entries.
EVENT_BOWSER_PDC_LOST_ELECTION - 0x40001F5B - (8027)
The browser running on the Domain Controller has lost an election. The computer that won the election is %2, on the transport %3.%n The data contains the election version, election criteria, and remote computer time up, and the same information for the current computer.
EVENT_BOWSER_NON_PDC_WON_ELECTION - 0x40001F5C - (8028)
The browser running on this computer has won a browser election on network %2. This computer is a member of a domain, so the Domain Controller should become the master browser.
EVENT_BOWSER_CANT_READ_REGISTRY - 0x40001F5D - (8029)
The browser driver was unable to initialize variables from the Registry.
EVENT_BOWSER_MAILSLOT_DATAGRAM_THRESHOLD_EXCEEDED - 0x40001F5E - (8030)
The browser driver has discarded too many mailslot messages.
EVENT_BOWSER_GETBROWSERLIST_THRESHOLD_EXCEEDED - 0x40001F5F - (8031)
The browser driver has discarded too many GetBrowserServerList requests.
EVENT_BROWSER_BACKUP_STOPPED - 0xC0001F60 - (8032)
The browser service has failed to retrieve the backup list too many times on transport %1. The backup browser is stopping.
EVENT_BROWSER_ELECTION_SENT_LANMAN_NT_STOPPED - 0x40001F61 - (8033)
The browser has forced an election on network %1 because a master browser was stopped.
EVENT_BROWSER_GETBLIST_RECEIVED_NOT_MASTER - 0xC0001F62 - (8034)
The browser has received a GetBrowserServerList request when it is not the master browser.
EVENT_BROWSER_ELECTION_SENT_ROLE_CHANGED - 0x40001F63 - (8035)
The browser has forced an election on network %1 because the Domain Controller (or Server) has changed its role.
EVENT_BROWSER_NOT_STARTED_IPX_CONFIG_MISMATCH - 0xC0001F64 - (8036)
The browser has failed to start because of an error in the DirectHostBinding parameter to the browser.
NWSAP_EVENT_KEY_NOT_FOUND - 0xC0002134 - (8500)
The Registry Key %1 was not present. The Sap Agent could not start.
NWSAP_EVENT_WSASTARTUP_FAILED - 0xC0002135 - (8501)
Winsock startup routine failed. The Sap Agent cannot continue.
NWSAP_EVENT_SOCKET_FAILED - 0xC0002136 - (8502)
Socket create call failed for main socket. The Sap Agent cannot continue.
NWSAP_EVENT_SETOPTBCAST_FAILED - 0xC0002137 - (8503)
Setting broadcast option on socket failed. The Sap Agent cannot continue.
NWSAP_EVENT_BIND_FAILED - 0xC0002138 - (8504)
Binding to SAP Socket failed. The Sap Agent cannot continue.
NWSAP_EVENT_GETSOCKNAME_FAILED - 0xC0002139 - (8505)
Getting bound address of socket failed. The Sap Agent cannot continue.
NWSAP_EVENT_OPTEXTENDEDADDR_FAILED - 0xC000213A - (8506)
Setting option EXTENDED_ADDRESS failed. The Sap Agent cannot continue.
NWSAP_EVENT_OPTBCASTINADDR_FAILED - 0xC000213B - (8507)
Setting NWLink option BCASTINTADDR failed. The Sap Agent cannot continue.
NWSAP_EVENT_CARDMALLOC_FAILED - 0xC000213C - (8508)
Error allocating memory to hold a card structure. The Sap Agent cannot continue.
NWSAP_EVENT_NOCARDS - 0xC000213D - (8509)
Enumeration of cards returned 0 cards.
NWSAP_EVENT_THREADEVENT_FAIL - 0xC000213E - (8510)
Error creating thread counting event. The Sap Agent cannot continue.
NWSAP_EVENT_RECVSEM_FAIL - 0xC000213F - (8511)
Error creating receive semaphore. The Sap Agent cannot continue.
NWSAP_EVENT_SENDEVENT_FAIL - 0xC0002140 - (8512)
Error creating send event. The Sap Agent cannot continue.
NWSAP_EVENT_STARTRECEIVE_ERROR - 0xC0002141 - (8513)
Error starting receive thread. The Sap Agent cannot continue.
NWSAP_EVENT_STARTWORKER_ERROR - 0xC0002142 - (8514)
Error starting worker thread. The Sap Agent cannot continue.
NWSAP_EVENT_TABLE_MALLOC_FAILED - 0xC0002143 - (8515)
Error allocating database array. The Sap Agent cannot continue.
NWSAP_EVENT_HASHTABLE_MALLOC_FAILED - 0xC0002144 - (8516)
Error allocating hash table. The Sap Agent cannot continue.
NWSAP_EVENT_STARTLPCWORKER_ERROR - 0xC0002145 - (8517)
Error starting LPC worker thread. The Sap Agent cannot continue.
NWSAP_EVENT_CREATELPCPORT_ERROR - 0xC0002146 - (8518)
Error creating the LPC port. The Sap Agent cannot continue.
NWSAP_EVENT_CREATELPCEVENT_ERROR - 0xC0002147 - (8519)
Error creating the LPC thread event. The Sap Agent cannot continue.
NWSAP_EVENT_LPCLISTENMEMORY_ERROR - 0xC0002148 - (8520)
Error allocating memory for an LPC Client structure. The Sap Agent cannot continue.
NWSAP_EVENT_LPCHANDLEMEMORY_ERROR - 0xC0002149 - (8521)
Error allocating buffer to hold LPC worker thread handles. The Sap Agent cannot continue.
NWSAP_EVENT_BADWANFILTER_VALUE - 0xC000214A - (8522)
The value for WANFilter in the registry must be 0-2. The Sap Agent cannot continue.
NWSAP_EVENT_CARDLISTEVENT_FAIL - 0xC000214B - (8523)
Error creating event for card list access synchronization. The Sap Agent cannot continue.
NWSAP_EVENT_SDMDEVENT_FAIL - 0xC000214C - (8524)
Error creating event for database access synchronization. The Sap Agent cannot continue.
NWSAP_EVENT_INVALID_FILTERNAME - 0x8000214D - (8525)
Name too long in key %1: Name = %s. The Sap Agent cannot continue.
NWSAP_EVENT_WANSEM_FAIL - 0xC000214E - (8526)
Error creating WAN control semaphore. The Sap Agent cannot continue.
NWSAP_EVENT_WANSOCKET_FAILED - 0xC000214F - (8527)
Socket create call failed for WAN socket. The Sap Agent cannot continue.
NWSAP_EVENT_WANBIND_FAILED - 0xC0002150 - (8528)
Binding to WAN socket failed. The Sap Agent cannot continue.
NWSAP_EVENT_STARTWANWORKER_ERROR - 0xC0002151 - (8529)
Error starting WAN worker thread. The Sap Agent cannot continue.
NWSAP_EVENT_STARTWANCHECK_ERROR - 0xC0002152 - (8530)
Error starting WAN check thread. The Sap Agent cannot continue.
NWSAP_EVENT_OPTMAXADAPTERNUM_ERROR - 0xC0002153 - (8531)
Error on getsockopt IPX_MAX_ADAPTER_NUM. Data is the error code. The Sap Agent cannot continue.
NWSAP_EVENT_WANHANDLEMEMORY_ERROR - 0xC0002154 - (8532)
Error allocating buffer to hold WAN notify thread handles. The Sap Agent cannot continue.
NWSAP_EVENT_WANEVENT_ERROR - 0xC0002155 - (8533)
Error creating the WAN thread event. The Sap Agent cannot continue.
JET_INIT_ERROR - 0xC0002328 - (9000)
The Windows Search Service cannot open the Jet property store.%1
JET_NEW_PROP_STORE_ERROR - 0xC0002329 - (9001)
The Windows Search Service cannot create a Jet property store.%1
EVENT_TRANSPORT_RESOURCE_POOL - 0x80002329 - (9001)
%2 could not allocate a resource of type %3 due to system resource problems.
JET_GET_PROP_STORE_ERROR - 0xC000232A - (9002)
The Windows Search Service cannot load the property store information.%1
EVENT_TRANSPORT_RESOURCE_LIMIT - 0x8000232A - (9002)
%2 could not allocate a resource of type %3 due to its configured size of %4.
JET_MULTIINSTANCE_DISABLED - 0x8000232B - (9003)
The Windows Search Service cannot initialize multi-instancing in Jet. If the application is used in a cluster environment, all applications using Jet will fail in the same group.%1
EVENT_TRANSPORT_RESOURCE_SPECIFIC - 0x8000232B - (9003)
%2 could not allocate a resource of type %3 due to a specifically configured limit of %4.
EVENT_TRANSPORT_REGISTER_FAILED - 0xC000232C - (9004)
%2 failed to register itself with the NDIS wrapper.
EVENT_TRANSPORT_BINDING_FAILED - 0xC000232D - (9005)
%2 failed to bind to network adapter %3.
EVENT_TRANSPORT_ADAPTER_NOT_FOUND - 0xC000232E - (9006)
%2 could not find network adapter %3.
EVENT_TRANSPORT_SET_OID_FAILED - 0xC000232F - (9007)
%2 failed while setting object identifier %3 on network adapter %4.
EVENT_TRANSPORT_QUERY_OID_FAILED - 0xC0002330 - (9008)
%2 failed while querying object identifier %3 on network adapter %4.
EVENT_TRANSPORT_TRANSFER_DATA - 0x40002331 - (9009)
%2 could not transfer a packet from the network adapter. The packet was dropped.
EVENT_TRANSPORT_TOO_MANY_LINKS - 0x40002332 - (9010)
%2 could not create a link to a remote computer. Your computer has exceeded the number of connections it can make to that remote computer.
EVENT_TRANSPORT_BAD_PROTOCOL - 0x40002333 - (9011)
%2 received an unexpected %3 packet from a remote computer.
EVENT_IPX_NEW_DEFAULT_TYPE - 0x4000251D - (9501)
The default frame type for auto-detection on %2 was changed to %3. This type is now the default if no frame type can be detected.
EVENT_IPX_SAP_ANNOUNCE - 0x8000251E - (9502)
A SAP announcement was sent over %2 which is configured for multiple networks, but no internal network is configured. This may prevent machines on some networks from locating the advertised service.
EVENT_IPX_ILLEGAL_CONFIG - 0x8000251F - (9503)
The value for the %2 parameter %3 was illegal.
EVENT_IPX_INTERNAL_NET_INVALID - 0xC0002520 - (9504)
%2 was configured with an internal network number of %3. This network number conflicts with one of the attached networks. The configured internal network number will be ignored.
EVENT_IPX_NO_FRAME_TYPES - 0xC0002521 - (9505)
%2 had no frame types configured for the binding to adapter %3.
EVENT_IPX_CREATE_DEVICE - 0xC0002522 - (9506)
%2 failed to initialize because the driver device could not be created.
EVENT_IPX_NO_ADAPTERS - 0xC0002523 - (9507)
%2 could not bind to any adapters. The transport could not start.
EVENT_RPCSS_CREATEPROCESS_FAILURE - 0xC0002710 - (10000)
Unable to start a DCOM Server: %3. The error:%n"%%%2"%nHappened while starting this command:%n%1
EVENT_RPCSS_RUNAS_CREATEPROCESS_FAILURE - 0xC0002711 - (10001)
Unable to start a DCOM Server: %3 as %4/%5. The error:%n"%%%2"%nHappened while starting this command:%n%1
EVENT_RPCSS_LAUNCH_ACCESS_DENIED - 0xC0002712 - (10002)
Access denied attempting to launch a DCOM Server. The server is:%n%1%nThe user is %2/%3, SID=%4.
EVENT_RPCSS_DEFAULT_LAUNCH_ACCESS_DENIED - 0xC0002713 - (10003)
Access denied attempting to launch a DCOM Server using DefaultLaunchPermssion. The server is:%n%1%nThe user is %2/%3, SID=%4.
EVENT_RPCSS_RUNAS_CANT_LOGIN - 0xC0002714 - (10004)
DCOM got error "%%%1" and was unable to logon %2\%3 in order to run the server:%n%4
EVENT_RPCSS_START_SERVICE_FAILURE - 0xC0002715 - (10005)
DCOM got error "%%%1" attempting to start the service %2 with arguments "%3" in order to run the server:%n%4
EVENT_RPCSS_REMOTE_SIDE_ERROR - 0xC0002716 - (10006)
DCOM got error "%%%1" from the computer %2 when attempting to activate the server:%n%3
EVENT_RPCSS_ACTIVATION_ERROR - 0xC0002717 - (10007)
DCOM got error "%%%1" when attempting to activate the server:%n%2
EVENT_RPCSS_REMOTE_SIDE_ERROR_WITH_FILE - 0xC0002718 - (10008)
DCOM got error "%%%1" from the computer %2 when attempting to the server:%n%3 with file %4.
EVENT_RPCSS_REMOTE_SIDE_UNAVAILABLE - 0xC0002719 - (10009)
DCOM was unable to communicate with the computer %1 using any of the configured protocols.
EVENT_RPCSS_SERVER_START_TIMEOUT - 0xC000271A - (10010)
The server %1 did not register with DCOM within the required timeout.
EVENT_RPCSS_SERVER_NOT_RESPONDING - 0xC000271B - (10011)
The server %1 could not be contacted to establish the connection to the client
EVENT_DCOM_ASSERTION_FAILURE - 0xC000271C - (10012)
There is an assertion failure in DCOM. Context follows: %1 %2 %3
EVENT_WARNING_CANNOT_UPGRADE_NOISE_FILES - 0x8000271D - (10013)
The noise files cannot be renamed.%1
EVENT_DCOM_INVALID_ENDPOINT_DATA - 0xC000271D - (10013)
DCOM server attempted to listen on an invalid endpoint. Protseq: %1 Endpoint: %2 Flags: %3
EVENT_WARNING_CANNOT_UPGRADE_NOISE_FILE - 0x8000271E - (10014)
The noise file "%2"" cannot be renamed to ""%3"".%1
EVENT_DCOM_COMPLUS_DISABLED - 0xC000271E - (10014)
The activation for CLSID %1 failed because remote activations for COM+ are disabled. To enable this functionality use the Configure Your Server wizard and select the Web Application Server role.
EVENT_WIN32_ERROR - 0x8000271F - (10015)
%2Unexpected Win32 error: %3 failed in %4. Error: %5. %1
EVENT_PERF_COUNTERS_NOT_LOADED - 0x80002724 - (10020)
Performance Counters could not be loaded for %1 for instance %2 %3 due to the following error: %4.
EVENT_PERF_COUNTERS_REGISTRY_TROUBLE - 0x80002725 - (10021)
Could not get performance counter registry info for %1 for instance %2 %3 due to the following error: %4.
EVENT_PERF_COUNTERS_ALREADY_EXISTS - 0x80002726 - (10022)
Performance counters will not be loaded because the named objects (shared memory or events) are in use for %1 for instance %2 %3.
EVENT_PROTOCOL_HOST_FORCE_TERMINATE - 0x80002727 - (10023)
The protocol host process %2 did not respond and is being forcibly terminated {filter host process %3}. %1
EVENT_FILTER_HOST_FORCE_TERMINATE - 0x80002728 - (10024)
The filter host process %2 did not respond and is being forcibly terminated. %1
EVENT_RPCSS_STOP_SERVICE_FAILURE - 0xC000272D - (10029)
The activation of the CLSID %1 timed out waiting for the service %2 to stop.
EVENT_RPCSS_CREATEDEBUGGERPROCESS_FAILURE - 0xC000272E - (10030)
Unable to start a COM Server for debugging: %3. The error:%n"%%%2"%nHappened while starting this command:%n%1
EVENT_DNS_CACHE_START_FAILURE_NO_DLL - 0xC0002AF8 - (11000)
Unable to start DNS Client Service. Failed to load DLL %2, Error: %1. Please reinstall this DLL from installation CD.
EVENT_DNS_CACHE_START_FAILURE_NO_ENTRY - 0xC0002AF9 - (11001)
Unable to start DNS Client service. Can not find entry %3 in DLL %2. Please reinstall this DLL from installation CD. See event details for specific error code information.
EVENT_DNS_CACHE_START_FAILURE_NO_CONTROL - 0xC0002AFA - (11002)
Unable to start the DNS Client service. The system could not register a service control handler and could be out of resources. Close any applications not in use or reboot the computer. See event details for specific error code information.
EVENT_DNS_CACHE_START_FAILURE_NO_DONE_EVENT - 0xC0002AFB - (11003)
Unable to start DNS Client service. The system could not create a termination event for this service and could be out of resources. Close any applications not in use or reboot the computer. See event details for specific error code information.
EVENT_DNS_CACHE_START_FAILURE_NO_RPC - 0xC0002AFC - (11004)
Unable to start DNS Client service. Could not start the Remote Procedure Call (RPC) interface for this service. To correct the problem, you may restart the RPC and DNS Client services. To do so, use the following commands at a command prompt: (1) type "net start rpc" to start the RPC service, and (2) type "net start dnscache" to start the DNS Client service. See event details for specific error code information.
EVENT_DNS_CACHE_START_FAILURE_NO_SHUTDOWN_NOTIFY - 0xC0002AFD - (11005)
Unable to start DNS Client service. The system could not register shutdown notification for this service and could be out of resources. Try closing any applications not in use or reboot the computer.
EVENT_DNS_CACHE_START_FAILURE_NO_UPDATE - 0xC0002AFE - (11006)
Unable to start DNS Client service. Could not update status with Service Control Manager. To correct the problem, you may restart the RPC and DNS Client services. To do so, use the following commands at a command prompt: (1) type "net start rpc" to start the RPC service, and (2) type "net start dnscache" to start the DNS Client service. See event details for specific error code information.
EVENT_DNS_CACHE_START_FAILURE_LOW_MEMORY - 0xC0002AFF - (11007)
Unable to start DNS Client service because the system failed to allocate memory and may be out of available memory. Try closing any applications not in use or reboot the computer. See event details for specific error code information.
EVENT_DNS_CACHE_NETWORK_PERF_WARNING - 0x80002B2A - (11050)
The DNS Client service could not contact any DNS servers for a repeated number of attempts. For the next %3 seconds the DNS Client service will not use the network to avoid further network performance problems. It will resume its normal behavior after that. If this problem persists, verify your TCP/IP configuration, specifically check that you have a preferred (and possibly an alternate) DNS server configured. If the problem continues, verify network conditions to these DNS servers or contact your network administrator.
EVENT_DNS_CACHE_UNABLE_TO_REACH_SERVER_WARNING - 0x80002B2B - (11051)
The DNS Client service failed to reach DNS server at address %1. It will not use this DNS server for %2 seconds.
EVENT_DNSAPI_REGISTRATION_FAILED_TIMEOUT - 0x80002B8E - (11150)
The system failed to register network adapter with settings:%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n DNS Server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6%n%n The cause of this DNS registration failure was because the DNS update request timed out after being sent to the specified DNS Server. This is probably because the authoritative DNS server for the name being updated is not running.%n%n You can manually retry registration of the network adapter and its settings by typing "ipconfig /registerdns" at the command prompt. If problems still persist, contact your network systems administrator to verify network conditions.
EVENT_DNSAPI_REGISTRATION_FAILED_SERVERFAIL - 0x80002B8F - (11151)
The system failed to register network adapter with settings:%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6%n%n The cause of this DNS registration failure was because of DNS server failure. This may be due to a zone transfer that has locked the DNS server for the applicable zone that your computer needs to register itself with.%n%n (The applicable zone should typically correspond to the Adapter-specific Domain Suffix that was indicated above.) You can manually retry registration of the network adapter and its settings by typing "ipconfig /registerdns" at the command prompt. If problems still persist, contact your network systems administrator to verify network conditions.
EVENT_DNSAPI_REGISTRATION_FAILED_NOTSUPP - 0x80002B90 - (11152)
The system failed to register network adapter with settings:%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6%n%n The reason it could not register was because either: (a) the DNS server does not support the DNS dynamic update protocol, or (b) the primary zone authoritative for the registering names does not currently accept dynamic updates.%n%n To add or register a DNS host (A or AAAA) resource record using the specific DNS name for this adapter, contact your DNS server or network systems administrator.
EVENT_DNSAPI_REGISTRATION_FAILED_REFUSED - 0x80002B91 - (11153)
The system failed to register network adapter with settings:%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6%n%n The reason it could not register was because the DNS server refused the dynamic update request. This could happen for the following reasons: (a) current DNS update policies do not allow this computer to update the DNS domain name configured for this adapter, or (b) the authoritative DNS server for this DNS domain name does not support the DNS dynamic update protocol.%n%n To register a DNS host (A or AAAA) resource record using the specific DNS domain name for this adapter, contact your DNS server or network systems administrator.
EVENT_DNSAPI_REGISTRATION_FAILED_SECURITY - 0x80002B92 - (11154)
The system failed to register network adapter with settings:%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6%n%n The system could not register the DNS update request because of a security related problem. This could happen for the following reasons: (a) the DNS domain name that your computer is trying to register could not be updated because your computer does not have the right permissions, or (b) there might have been a problem negotiating valid credentials with the DNS server to update.%n%n You can manually retry DNS registration of the network adapter and its settings by typing "ipconfig /registerdns" at the command prompt. If problems still persist, contact your DNS server or network systems administrator. See event details for specific error code information.
EVENT_DNSAPI_REGISTRATION_FAILED_OTHER - 0x80002B93 - (11155)
The system failed to register network adapter with settings:%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6%n%n The reason the DNS update request could not be completed was because of a system problem. You can manually retry DNS registration of the network adapter and its settings by typing "ipconfig /registerdns" at the command prompt. If problems still persist, contact your DNS server or network systems administrator. See event details for specific error code information.
EVENT_DNSAPI_PTR_REGISTRATION_FAILED_TIMEOUT - 0x80002B94 - (11156)
The system failed to register pointer (PTR) resource records (RRs) for network adapter%nwith settings:%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address : %6%n%n The reason that the system could not register these RRs was because the update request that was sent to the specified DNS server timed out. This is probably because the authoritative DNS server for the name being registered is not running.%n%n You can manually retry DNS registration of the network adapter and its settings by typing "ipconfig /registerdns" at the command prompt. If problems still persist, contact your DNS server or network systems administrator. See event details for specific error code information.
EVENT_DNSAPI_PTR_REGISTRATION_FAILED_SERVERFAIL - 0x80002B95 - (11157)
The system failed to register pointer (PTR) resource records (RRs) for network adapter%nwith settings:%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address : %6%n%n The cause was DNS server failure. This may because the reverse lookup zone is busy or missing on the DNS server that your computer needs to update. In most cases, this is a minor problem because it does not affect normal (forward) name resolution.%n%n If reverse (address-to-name) resolution is required for your computer, you can manually retry DNS registration of the network adapter and its settings by typing "ipconfig /registerdns" at the command prompt. If problems still persist, contact your DNS server or network systems administrator. See event details for specific error code information.
EVENT_DNSAPI_PTR_REGISTRATION_FAILED_NOTSUPP - 0x80002B96 - (11158)
The system failed to register pointer (PTR) resource records (RRs) for network adapter%nwith settings:%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address : %6%n%n The reason that the system could not register these RRs was because (a) either the DNS server does not support the DNS dynamic update protocol, or (b) the authoritative zone where these records are to be registered does not allow dynamic updates.%n%n To register DNS pointer (PTR) resource records using the specific DNS domain name and IP addresses for this adapter, contact your DNS server or network systems administrator.
EVENT_DNSAPI_PTR_REGISTRATION_FAILED_REFUSED - 0x80002B97 - (11159)
The system failed to register pointer (PTR) resource records (RRs) for network adapter%nwith settings:%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address : %6%n%n The reason that the system could not register these RRs was because the DNS server refused the update request. The cause of this could be (a) your computer is not allowed to update the adapter-specified DNS domain name, or (b) because the DNS server authoritative for the specified name does not support the DNS dynamic update protocol.%n%n To register the DNS pointer (PTR) resource records using the specific DNS domain name and IP addresses for this adapter, contact your DNS server or network systems administrator.
EVENT_DNSAPI_PTR_REGISTRATION_FAILED_SECURITY - 0x80002B98 - (11160)
The system failed to register pointer (PTR) resource records (RRs) for network adapter%nwith settings:%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address : %6%n%n The reason that the system could not register these RRs was because of a security related problem. The cause of this could be (a) your computer does not have permissions to register and update the specific DNS domain name set for this adapter, or (b) there might have been a problem negotiating valid credentials with the DNS server during the processing of the update request.%n%n You can manually retry DNS registration of the network adapter and its settings by typing "ipconfig /registerdns" at the command prompt. If problems still persist, contact your DNS server or network systems administrator.
EVENT_DNSAPI_PTR_REGISTRATION_FAILED_OTHER - 0x80002B99 - (11161)
The system failed to register pointer (PTR) resource records (RRs) for network adapter%nwith settings:%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address : %6%n%n The reason the system could not register these RRs during the update request was because of a system problem. You can manually retry DNS registration of the network adapter and its settings by typing "ipconfig /registerdns" at the command prompt. If problems still persist, contact your DNS server or network systems administrator. See event details for specific error code information.
EVENT_DNSAPI_REGISTRATION_FAILED_TIMEOUT_PRIMARY_DN - 0x80002B9A - (11162)
The system failed to register host (A or AAAA) resource records (RRs) for network adapter%nwith settings:%n%n Adapter Name : %1%n Host Name : %2%n Primary Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6%n%n The reason the system could not register these RRs was because the update request it sent to the DNS server timed out. The most likely cause of this is that the DNS server authoritative for the name it was attempting to register or update is not running at this time.%n%n You can manually retry DNS registration of the network adapter and its settings by typing "ipconfig /registerdns" at the command prompt. If problems still persist, contact your DNS server or network systems administrator.
EVENT_DNSAPI_REGISTRATION_FAILED_SERVERFAIL_PRIMARY_DN - 0x80002B9B - (11163)
The system failed to register host (A or AAAA) resource records (RRs) for network adapter%nwith settings:%n%n Adapter Name : %1%n Host Name : %2%n Primary Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6%n%n The reason the system could not register these RRs was because the DNS server failed the update request. The most likely cause of this is that the authoritative DNS server required to process this update request has a lock in place on the zone, probably because a zone transfer is in progress.%n%n You can manually retry DNS registration of the network adapter and its settings by typing "ipconfig /registerdns" at the command prompt. If problems still persist, contact your DNS server or network systems administrator.
EVENT_DNSAPI_REGISTRATION_FAILED_NOTSUPP_PRIMARY_DN - 0x80002B9C - (11164)
The system failed to register host (A or AAAA) resource records for network adapter%nwith settings:%n%n Adapter Name : %1%n Host Name : %2%n Primary Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6%n%n Either the DNS server does not support the DNS dynamic update protocol or the authoritative zone for the specified DNS domain name does not accept dynamic updates.%n%n To register the DNS host (A or AAAA) resource records using the specific DNS domain name and IP addresses for this adapter, contact your DNS server or network systems administrator.
EVENT_DNSAPI_REGISTRATION_FAILED_REFUSED_PRIMARY_DN - 0x80002B9D - (11165)
The system failed to register host (A or AAAA) resource records (RRs) for network adapter%nwith settings:%n%n Adapter Name : %1%n Host Name : %2%n Primary Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6%n%n The reason the system could not register these RRs was because the DNS server contacted refused the update request. The reasons for this might be (a) you are not allowed to update the specified DNS domain name, or (b) because the DNS server authoritative for this name does not support the DNS dynamic update protocol.%n%n To register the DNS host (A or AAAA) resource records using the specific DNS domain name and IP addresses for this adapter, contact your DNS server or network systems administrator.
EVENT_DNSAPI_REGISTRATION_FAILED_SECURITY_PRIMARY_DN - 0x80002B9E - (11166)
The system failed to register host (A or AAAA) resource records (RRs) for network adapter%nwith settings:%n%n Adapter Name : %1%n Host Name : %2%n Primary Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6%n%n The reason the system could not register these RRs was because of a security related problem. The cause of this could be (a) your computer does not have permissions to register and update the specific DNS domain name set for this adapter, or (b) there might have been a problem negotiating valid credentials with the DNS server during the processing of the update request.%n%n You can manually retry DNS registration of the network adapter and its settings by typing "ipconfig /registerdns" at the command prompt. If problems still persist, contact your DNS server or network systems administrator. See event details for specific error code information.
EVENT_DNSAPI_REGISTRATION_FAILED_OTHER_PRIMARY_DN - 0x80002B9F - (11167)
The system failed to register host (A or AAAA) resource records (RRs) for network adapter%nwith settings:%n%n Adapter Name : %1%n Host Name : %2%n Primary Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6%n%n The reason the system could not register these RRs during the update request was because of a system problem. You can manually retry DNS registration of the network adapter and its settings by typing "ipconfig /registerdns" at the command prompt. If problems still persist, contact your DNS server or network systems administrator. See event details for specific error code information.
EVENT_DNSAPI_DEREGISTRATION_FAILED_TIMEOUT - 0x80002BAC - (11180)
The system failed to update and remove registration for the network adapter with settings:%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6%n%n The reason for this failure is because the DNS server it sent the update request to timed out. The most likely cause of this failure is that the DNS server authoritative for the zone where the registration was originally made is either not running or unreachable through the network at this time.
EVENT_DNSAPI_DEREGISTRATION_FAILED_SERVERFAIL - 0x80002BAD - (11181)
The system failed to update and remove registration for the network adapter with settings:%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6%n%n The reason for this failure is because the DNS server it sent the update to failed the update request. A possible cause of this failure is that the DNS server required to process this update request has a lock in place on the zone, probably because a zone transfer is in progress.%n%n
EVENT_DNSAPI_DEREGISTRATION_FAILED_NOTSUPP - 0x80002BAE - (11182)
The system failed to update and remove registration for the network adapter with settings:%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6%n%n The reason for this failure is because the DNS server sent the update either (a) does not support the DNS dynamic update protocol, or (b) the authoritative zone for the specified DNS domain name does not currently accept DNS dynamic updates.
EVENT_DNSAPI_DEREGISTRATION_FAILED_REFUSED - 0x80002BAF - (11183)
The system failed to update and remove registration for the network adapter with settings:%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6%n%n The reason the system could not perform the update request was the DNS server contacted refused update request. The cause of this is (a) this computer is not allowed to update the specified DNS domain name, or (b) because the DNS server authoritative for the zone that requires updating does not support the DNS dynamic update protocol.
EVENT_DNSAPI_DEREGISTRATION_FAILED_SECURITY - 0x80002BB0 - (11184)
The system failed to update and remove registration for the network adapter with settings:%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6%n%n The reason the system could not perform the update request was because of a security related problem. The cause of this could be (a) your computer does not have permissions to register and update the specific DNS domain name set for this adapter, or (b) there might have been a problem negotiating valid credentials with the DNS server during the processing of the update request.%n%n See event details for specific error code information.
EVENT_DNSAPI_DEREGISTRATION_FAILED_OTHER - 0x80002BB1 - (11185)
The system failed to update and remove the DNS registration for the network adapter with settings:%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6%n%n The system could not update to remove this DNS registration because of a system problem. See event details for specific error code information.
EVENT_DNSAPI_PTR_DEREGISTRATION_FAILED_TIMEOUT - 0x80002BB2 - (11186)
The system failed to update and remove pointer (PTR) resource records (RRs) for network adapter%nwith settings:%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address : %6%n%n The system could not remove these PTR RRs because the update request timed out while awaiting a response from the DNS server. This is probably because the DNS server authoritative for the zone that requires update is not running.
EVENT_DNSAPI_PTR_DEREGISTRATION_FAILED_SERVERFAIL - 0x80002BB3 - (11187)
The system failed to update and remove pointer (PTR) resource records (RRs) for network adapter%nwith settings:%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address : %6%n%n The system could not remove these PTR RRs because the DNS server failed the update request. A possible cause is that a zone transfer is in progress, causing a lock for the zone at the DNS server authorized to perform the updates for these RRs.
EVENT_DNSAPI_PTR_DEREGISTRATION_FAILED_NOTSUPP - 0x80002BB4 - (11188)
The system failed to update and remove pointer (PTR) resource records (RRs) for network adapter%nwith settings:%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address : %6%n%n The system could not remove these PTR RRs because either the DNS server does not support the DNS dynamic update protocol or the authoritative zone that contains these RRs does not accept dynamic updates.
EVENT_DNSAPI_PTR_DEREGISTRATION_FAILED_REFUSED - 0x80002BB5 - (11189)
The system failed to update and remove pointer (PTR) resource records (RRs) for network adapter%nwith settings:%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address : %6%n%n The system could not remove these PTR RRs because the DNS server refused the update request. The cause of this might be (a) this computer is not allowed to update the specified DNS domain name specified by these settings, or (b) because the DNS server authorized to perform updates for the zone that contains these RRs does not support the DNS dynamic update protocol.
EVENT_DNSAPI_PTR_DEREGISTRATION_FAILED_SECURITY - 0x80002BB6 - (11190)
The system failed to update and remove pointer (PTR) resource records (RRs) for network adapter%nwith settings:%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address : %6%n%n The system could not remove these PTR RRs because of a security related problem. The cause of this could be that (a) your computer does not have permissions to remove and update the specific DNS domain name or IP addresses configured for this adapter, or (b) there might have been a problem negotiating valid credentials with the DNS server during the processing of the update request. See event details for specific error code information.
EVENT_DNSAPI_PTR_DEREGISTRATION_FAILED_OTHER - 0x80002BB7 - (11191)
The system failed to update and remove pointer (PTR) resource records (RRs) for network adapter%nwith settings:%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address : %6%n%n The system could not remove these PTR RRs because because of a system problem. See event details for specific error code information.
EVENT_DNSAPI_DEREGISTRATION_FAILED_TIMEOUT_PRIMARY_DN - 0x80002BB8 - (11192)
The system failed to update and remove host (A or AAAA) resource records (RRs) for network adapter%nwith settings:%n%n Adapter Name : %1%n Host Name : %2%n Primary Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6%n%n The system could not remove these host (A or AAAA) RRs because the update request timed out while awaiting a response from the DNS server. This is probably because the DNS server authoritative for the zone where these RRs need to be updated is either not currently running or reachable on the network.
EVENT_DNSAPI_DEREGISTRATION_FAILED_SERVERFAIL_PRIMARY_DN - 0x80002BB9 - (11193)
The system failed to update and remove host (A or AAAA) resource records (RRs) for network adapter%nwith settings:%n%n Adapter Name : %1%n Host Name : %2%n Primary Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6%n%n The system could not remove these host (A or AAAA) RRs because the DNS server failed the update request. A possible cause is that a zone transfer is in progress, causing a lock for the zone at the DNS server authorized to perform the updates for these RRs.
EVENT_DNSAPI_DEREGISTRATION_FAILED_NOTSUPP_PRIMARY_DN - 0x80002BBA - (11194)
The system failed to update and remove host (A or AAAA) resource records (RRs) for network adapter%nwith settings:%n%n Adapter Name : %1%n Host Name : %2%n Primary Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6%n%n The reason for this failure is because the DNS server sent the update either (a) does not support the DNS dynamic update protocol, or (b) the authoritative zone for the DNS domain name specified in these host (A or AAAA) RRs does not currently accept DNS dynamic updates.
EVENT_DNSAPI_DEREGISTRATION_FAILED_REFUSED_PRIMARY_DN - 0x80002BBB - (11195)
The system failed to update and remove host (A or AAAA) resource records (RRs) for network adapter%nwith settings:%n%n Adapter Name : %1%n Host Name : %2%n Primary Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6%n%n The request to remove these records failed because the DNS server refused the update request. The cause of this might be that either (a) this computer is not allowed to update the DNS domain name specified by these settings, or (b) because the DNS server authorized to perform updates for the zone that contains these RRs does not support the DNS dynamic update protocol.
EVENT_DNSAPI_DEREGISTRATION_FAILED_SECURITY_PRIMARY_DN - 0x80002BBC - (11196)
The system failed to update and remove host (A or AAAA) resource records (RRs) for network adapter%nwith settings:%n%n Adapter Name : %1%n Host Name : %2%n Primary Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6%n%n The reason for this failure was because of a security related problem. The cause of this could be that (a) your computer does not have permissions to remove and update the specific DNS domain name or IP addresses configured for this adapter, or (b) there might have been a problem negotiating valid credentials with the DNS server during the processing of the update request. See event details for specific error code information.
EVENT_DNSAPI_DEREGISTRATION_FAILED_OTHER_PRIMARY_DN - 0x80002BBD - (11197)
The system failed to update and remove host (A or AAAA) resource records (RRs) for network adapter%nwith settings:%n%n Adapter Name : %1%n Host Name : %2%n Primary Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6%n%n The reason the update request failed was because of a system problem. See event details for specific error code information
EVENT_DNSAPI_REGISTERED_ADAPTER - 0x40002BC0 - (11200)
The system registered network adapter with settings :%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6
EVENT_DNSAPI_REGISTERED_PTR - 0x40002BC1 - (11201)
The system registered pointer (PTR) resource records (RRs) for network adapter%nwith settings:%n%n Adapter Name : %1%n Host Name : %2%n Adapter-specific Domain Suffix : %3%n Primary Domain Suffix : %4%n DNS server list :%n %5%n Sent update to server : %6%n IP Address : %7
EVENT_DNSAPI_REGISTERED_ADAPTER_PRIMARY_DN - 0x40002BC2 - (11202)
The system registered host (A or AAAA) resource records (RRs) for network adapter%nwith settings :%n%n Adapter Name : %1%n Host Name : %2%n Primary Domain Suffix : %3%n DNS server list :%n %4%n Sent update to server : %5%n IP Address(es) :%n %6
EVENT_TRK_INTERNAL_ERROR - 0xC00030D4 - (12500)
An internal error occured in Distributed Link Tracking. The error code was %1.
EVENT_TRK_SERVICE_START_SUCCESS - 0x400030D5 - (12501)
Service started successfully
EVENT_TRK_SERVICE_START_FAILURE - 0xC00030D6 - (12502)
Service failed to start. Error = %1
EVENT_TRK_SERVICE_CORRUPT_LOG - 0xC00030D7 - (12503)
The Distributed Link Tracking log was corrupt on volume %1: and has been re-created. This log is used to automatically repair file links, such as Shell Shortcuts and OLE links, when for some reason those links become broken.
EVENT_TRK_SERVICE_VOL_QUOTA_EXCEEDED - 0x800030D8 - (12504)
The Distributed Link Tracking volume ID quota on this machine has been exceeded. As a result, it is not possible to create new volume IDs. Distributed Link Tracking normally uses these volume IDs to automatically repair file links, such as Shell Shortcuts and OLE links, when for some reason those links become broken.
EVENT_TRK_SERVICE_VOLUME_CREATE - 0x400030D9 - (12505)
A new volume ID has been assigned for %1:%n%2%n%n This ID is used by Distributed Link Tracking to automatically repair file links, such as Shell Shortcuts and OLE links, when for some reason those links become broken. If there previously were links to files on this volume that are broken, they might not be automatically repairable.
EVENT_TRK_SERVICE_VOLUME_CLAIM - 0x400030DA - (12506)
Ownership of the volume ID for %1: has been successfully claimed. This volume ID is used by Distributed Link Tracking to automatically repair file links, such as Shell Shortcuts and OLE links, when for some reason those links become broken.
EVENT_TRK_SERVICE_DUPLICATE_VOLIDS - 0x400030DB - (12507)
The volume ID for %1: has been reset, since it was a duplicate of that on %2:. This volume ID is used by Distributed Link Tracking to automatically repair file links, such as Shell Shortcuts and OLE links, when for some reason those links become broken.
EVENT_TRK_SERVICE_MOVE_QUOTA_EXCEEDED - 0x800030DC - (12508)
The move table quota for Distributed Link Tracking in this domain has been exceeded. This table is used by Distributed Link Tracking to automatically repair file links, such as Shell Shortcuts and OLE links, when for some reason those links become broken. While this quota is exceeded, it may not be possible to automatically repair some such broken links.
EVENT_FRS_ERROR - 0xC00034BC - (13500)
File Replication Service
EVENT_FRS_STARTING - 0x400034BD - (13501)
The File Replication Service is starting.
EVENT_FRS_STOPPING - 0x400034BE - (13502)
The File Replication Service is stopping.
EVENT_FRS_STOPPED - 0x400034BF - (13503)
The File Replication Service has stopped.
EVENT_FRS_STOPPED_FORCE - 0xC00034C0 - (13504)
The File Replication Service stopped without cleaning up.
EVENT_FRS_STOPPED_ASSERT - 0xC00034C1 - (13505)
The File Replication Service has stopped after taking an assertion failure.
EVENT_FRS_ASSERT - 0xC00034C2 - (13506)
The File Replication Service failed a consistency check %n (%3) %nin "%1" at line %2. %n %nThe File Replication Service will restart automatically at a later time. If this problem persists a subsequent entry in this event log describes the recovery procedure. %n For more information about the automatic restart right click on My Computer and then click on Manage, System Tools, Services, File Replication Service, and Recovery.
EVENT_FRS_VOLUME_NOT_SUPPORTED - 0xC00034C3 - (13507)
The File Replication Service cannot start replica set %1 on computer %2 for directory %3 because the type of volume %4 is not NTFS 5.0 or later. %n %nThe volume's type can be found by typing "chkdsk %4". %n %nThe volume can be upgraded to NTFS 5.0 or later by typing "chkntfs /E %4".
EVENT_FRS_LONG_JOIN - 0x800034C4 - (13508)
The File Replication Service is having trouble enabling replication from %1 to %2 for %3 using the DNS name %4. FRS will keep retrying. %n Following are some of the reasons you would see this warning. %n %n [1] FRS can not correctly resolve the DNS name %4 from this computer. %n [2] FRS is not running on %4. %n [3] The topology information in the Active Directory for this replica has not yet replicated to all the Domain Controllers. %n %n This event log message will appear once per connection, After the problem is fixed you will see another event log message indicating that the connection has been established.
EVENT_FRS_LONG_JOIN_DONE - 0x800034C5 - (13509)
The File Replication Service has enabled replication from %1 to %2 for %3 after repeated retries.
EVENT_FRS_CANNOT_COMMUNICATE - 0xC00034C6 - (13510)
The File Replication Service on the computer %1 cannot communicate with the File Replication Service on the computer %2. %n %nVerify that the computer %2 is up and running. %n %nVerify that the File Replication Service is running on %2 by typing "net start ntfrs" on %2. %n %nVerify that the network is functioning between %1 and %2 by typing "ping %1" on %2 and "ping %2" on %1. If the pings succeed then retry the failed operation. If the pings fail then there may be problems with the DNS server. %n %nThe DNS server is responsible for mapping computer names to IP addresses. The commands "ipconfig" and "nslookup" help diagnose problems with the DNS server. %n %nTyping "ipconfig /all" will list the computer's IP address and the IP address of the computer's DNS servers. Type "ping <DNS server's IP address>" to verify that a DNS server is available. The DNS mapping for %2 or %1 can be verified by typing "nslookup" and then typing "%2" and then "%1" on %1 and %2. Be sure to check out the DNS server on both %1 and %2; a DNS problem on either computer will prevent proper communication. %n %nSome network problems between %1 and %2 can be cleared up by flushing the DNS Resolver Cache. Type "ipconfig /flushdns". %n %nSome network problems between %1 and %2 can be cleared up by renewing the IP address. Type "ipconfig /release" followed by "ipconfig /renew". %n %nSome network problems between %1 and %2 can be cleared up by resetting the computer's DNS entry. Type "net stop NetLogon" followed by "net start NetLogon". %n %nSome problems between %1 and %2 can be cleared up by restarting the File Replication Service. Type "net stop ntfrs" followed by "net start ntfrs". %n %nSome problems between %1 and %2 can be cleared up by restarting the computers %1 and %2 AFTER CLOSING RUNNING APPLIATIONS, especially dcpromo. Click on Start, Shutdown, select Restart, and click on OK. %n %nOther network and computer problems are beyond the scope of this event log message.
EVENT_FRS_DATABASE_SPACE - 0xC00034C7 - (13511)
The File Replication Service is stopping on computer %1 because there is no free space on the volume containing %2. %n %nThe available space on the volume can be found by typing "dir %2". %n %nOnce free space is made available on the volume containing %2, the File Replication Service can be restarted immediately by typing "net start ntfrs". Otherwise, the File Replication Service will restart automatically at a later time. %n %nFor more information about the automatic restart right click on My Computer and then click on Manage, System Tools, Services, File Replication Service, and Recovery. %n %nFor more information about managing space on a volume type "copy /?", "rename /?", "del /?", "rmdir /?", and "dir /?".
EVENT_FRS_DISK_WRITE_CACHE_ENABLED - 0x800034C8 - (13512)
The File Replication Service has detected an enabled disk write cache on the drive containing the directory %2 on the computer %1. The File Replication Service might not recover when power to the drive is interrupted and critical updates are lost.
EVENT_FRS_JET_1414 - 0xC00034C9 - (13513)
The File Replication Service on computer %1 is stopping because the database %2 is corrupted. %n %nThe database can be recovered by typing "esentutl /d %2 /l%3 /s%4". %n %nOnce the database has been successfully recovered the File Replication Service can be restarted by typing "net start ntfrs".
EVENT_FRS_SYSVOL_NOT_READY - 0x800034CA - (13514)
The File Replication Service may be preventing the computer %1 from becoming a domain controller while the system volume is being initialized with data from another domain controller and then shared as SYSVOL. %n %nType "net share" to check for the SYSVOL share. The File Replication Service has stopped preventing the computer from becoming a domain controller once the SYSVOL share appears. %n %nThe initialization of the system volume can take some time. The time is dependent on the amount of data in the system volume, the availability of other domain controllers, and the replication interval between domain controllers.
EVENT_FRS_SYSVOL_NOT_READY_PRIMARY - 0x800034CB - (13515)
The File Replication Service may be preventing the computer %1 from becoming a domain controller while the system volume is being initialized and then shared as SYSVOL. %n %nType "net share" to check for the SYSVOL share. The File Replication Service has stopped preventing the computer from becoming a domain controller once the SYSVOL share appears. %n %nThe initialization of the system volume can take some time. The time is dependent on the amount of data in the system volume. %n %nThe initialization of the system volume can be bypassed by first typing regedt32 and setting the value of SysvolReady to 1 and then restarting the Netlogon service. %n %nWARNING - BYPASSING THE SYSTEM VOLUME INITIALIZATION IS NOT RECOMMENDED. Applications may fail in unexpected ways. %n %nThe value SysvolReady is located by clicking on HKEY_LOCAL_MACHINE and then clicking on System, CurrentControlSet, Services, Netlogon, and Parameters. %n %nThe Netlogon service can be restarted by typing "net stop netlogon" followed by "net start netlogon".
EVENT_FRS_SYSVOL_READY - 0x400034CC - (13516)
The File Replication Service is no longer preventing the computer %1 from becoming a domain controller. The system volume has been successfully initialized and the Netlogon service has been notified that the system volume is now ready to be shared as SYSVOL. %n %nType "net share" to check for the SYSVOL share.
EVENT_FRS_ACCESS_CHECKS_DISABLED - 0x800034CD - (13517)
The File Replication Service will not check access to the API "%1". %n %nAccess checks can be enabled for "%1" by running regedt32. %n %nClick on Start, Run, and type regedt32. %n %nClick on the window entitled HKEY_LOCAL_MACHINE. Double click on SYSTEM, CurrentControlSet, Services, NtFrs, Parameters, Access Checks, "%1", and "%2". Change the string to Enabled. %n %nPermissions can be changed by highlighting "%1" and then clicking on the toolbar option Security and then Permissions...
EVENT_FRS_ACCESS_CHECKS_FAILED_USER - 0x800034CE - (13518)
The File Replication Service did not grant the user "%3" access to the API "%1". %n %nPermissions for "%1" can be changed by running regedt32. %n %nClick on Start, Run, and type regedt32. %n %nClick on the window entitled HKEY_LOCAL_MACHINE. Double click on SYSTEM, CurrentControlSet, Services, NtFrs, Parameters, Access Checks, and highlight "%1". Click on the toolbar option Security and then Permissions... %n %nAccess checks can be disabled for "%1". Double click on "%2" and change the string to Disabled.
EVENT_FRS_ACCESS_CHECKS_FAILED_UNKNOWN - 0xC00034CF - (13519)
The File Replication Service could not grant an unknown user access to the API "%1". %n %nAccess checks can be disabled for "%1" by running regedt32. %n %nClick on Start, Run, and type regedt32. %n %nClick on the window entitled HKEY_LOCAL_MACHINE. Double click on SYSTEM, CurrentControlSet, Services, NtFrs, Parameters, Access Checks, "%1", and "%2". Change the string to Disabled. %n %nPermissions can be changed by highlighting "%1" and then clicking on the toolbar option Security and then Permissions...
EVENT_FRS_MOVED_PREEXISTING - 0x800034D0 - (13520)
The File Replication Service moved the preexisting files in %1 to %2. %n %nThe File Replication Service may delete the files in %2 at any time. Files can be saved from deletion by copying them out of %2. Copying the files into %1 may lead to name conflicts if the files already exist on some other replicating partner. %n %nIn some cases, the File Replication Service may copy a file from %2 into %1 instead of replicating the file from some other replicating partner. %n %nSpace can be recovered at any time by deleting the files in %2.
EVENT_FRS_CANNOT_START_BACKUP_RESTORE_IN_PROGRESS - 0xC00034D1 - (13521)
The File Replication Service cannot enable replication on the comptuer %1 until a backup/restore application completes. %n %nA backup/restore application has set a registry key that prevents the File Replication Service from starting until the registry key is deleted or the system is rebooted. %n %nThe backup/restore application may still be running. Check with your local administrator before proceeding further. %n %nThe computer can be rebooted by clicking on Start, Shutdown, and selecting Restart. %n %nWARNING - DELETING THE REGISTRY KEY IS NOT RECOMMENDED! Applications may fail in unexpected ways. %n %nThe registry key can be deleted by running regedt32. %n %nClick on Start, Run, and type regedt32. %n %nClick on the window entitled HKEY_LOCAL_MACHINE. Double click on SYSTEM, CurrentControlSet, Services, NtFrs, Parameters, Backup/Restore, "Stop NtFrs from Starting". On the toolbar, click on Edit and select Delete. Be careful! Deleting a key other than "Stop NtFrs From Starting" can have unexpected sideeffects.
EVENT_FRS_STAGING_AREA_FULL - 0x800034D2 - (13522)
The File Replication Service paused because the staging area is full. Replication will resume if staging space becomes available or if the staging space limit is increased. %n %nThe current value of the staging space limit is %1 KB. %n %nTo change the staging space limit, run regedt32. %n %nClick on Start, Run and type regedt32. %n %nClick on the window entitled HKEY_LOCAL_MACHINE. Double click on SYSTEM, CurrentControlSet, Services, NtFrs, Parameters, and the value "Staging Space Limit in KB".
EVENT_FRS_HUGE_FILE - 0x800034D3 - (13523)
The File Replication Service paused because the size of a file exceeds the staging space limit. Replication will resume only if the staging space limit is increased. %n %nThe staging space limit is %1 KB and the file size is %2 KB. %n %nTo change the staging space limit, run regedt32. %n %nClick on Start, Run and type regedt32. %n %nClick on the window entitled HKEY_LOCAL_MACHINE. Double click on SYSTEM, CurrentControlSet, Services, NtFrs, Parameters, and the value "Staging Space Limit in KB".
EVENT_FRS_CANNOT_CREATE_UUID - 0xC00034D4 - (13524)
The File Replication Service is stopping on the computer %1 because a universally unique ID (UUID) cannot be created. %n %nThe SDK function UuidCreate() returned the error "%2". %n %nThe problem may be the lack of an Ethernet address, token ring address, or network address. The lack of a network address implies an unsupported netcard. %n %nThe File Replication Service will restart automatically at a later time. For more information about the automatic restart right click on My Computer and then click on Manage, System Tools, Services, File Replication Service, and Recovery.
EVENT_FRS_NO_DNS_ATTRIBUTE - 0x800034D5 - (13525)
The File Replication Service cannot find the DNS name for the computer %1 because the "%2" attribute could not be read from the distinguished name "%3". %n %nThe File Replication Service will try using the name "%1" until the computer's DNS name appears.
EVENT_FRS_NO_SID - 0xC00034D6 - (13526)
The File Replication Service cannot replicate %1 with the computer %2 because the computer's SID cannot be determined from the distinguished name "%3". %n %nThe File Replication Service will retry later.
NTFRSPRF_OPEN_RPC_BINDING_ERROR_SET - 0xC00034D7 - (13527)
The RPC binding failed in the Open function of the FileReplicaSet Object. The counter data for this object will not be available. The FileReplicaSet object contains the performance counters of the Replica sets whose files are being replicated by the File Replication Service.
NTFRSPRF_OPEN_RPC_BINDING_ERROR_CONN - 0xC00034D8 - (13528)
The RPC binding failed in the Open function of the FileReplicaConn Object. The counter data for this object will not be available. The FileReplicaConn object contains the performance counters of the connections over which files are being replicated by the File Replication Service.
NTFRSPRF_OPEN_RPC_CALL_ERROR_SET - 0xC00034D9 - (13529)
The RPC call failed in the Open function of the FileReplicaSet Object. The counter data for this object will not be available. The FileReplicaSet object contains the performance counters of the Replica sets whose files are being replicated by the File Replication Service.
NTFRSPRF_OPEN_RPC_CALL_ERROR_CONN - 0xC00034DA - (13530)
The RPC call failed in the Open function of the FileReplicaConn Object. The counter data for this object will not be available. The FileReplicaConn object contains the performance counters of the connections over which files are being replicated by the File Replication Service.
NTFRSPRF_COLLECT_RPC_BINDING_ERROR_SET - 0xC00034DB - (13531)
The RPC binding failed in the Collect function of the FileReplicaSet Object. The counter data for this object will not be available till the binding succeeds. The FileReplicaSet object contains the performance counters of the Replica sets whose files are being replicated by the File Replication Service.
NTFRSPRF_COLLECT_RPC_BINDING_ERROR_CONN - 0xC00034DC - (13532)
The RPC binding failed in the Collect function of the FileReplicaConn Object. The counter data for this object will not be available till the binding succeeds. The FileReplicaConn object contains the performance counters of the connections over which files are being replicated by the File Replication Service.
NTFRSPRF_COLLECT_RPC_CALL_ERROR_SET - 0xC00034DD - (13533)
The RPC call failed in the Collect function of the FileReplicaSet Object. The counter data for this object will not be available till the call succeeds. The FileReplicaSet object contains the performance counters of the Replica sets whose files are being replicated by the File Replication Service.
NTFRSPRF_COLLECT_RPC_CALL_ERROR_CONN - 0xC00034DE - (13534)
The RPC call failed in the Collect function of the FileReplicaConn Object. The counter data for this object will not be available till the call succeeds. The FileReplicaConn object contains the performance counters of the connections over which files are being replicated by the File Replication Service.
NTFRSPRF_VIRTUALALLOC_ERROR_SET - 0xC00034DF - (13535)
The call to VirtualAlloc failed in the Open function of the FileReplicaSet Object. The counter data for this object will not be available. The FileReplicaSet object contains the performance counters of the Replica sets whose files are being replicated by the File Replication Service.
NTFRSPRF_VIRTUALALLOC_ERROR_CONN - 0xC00034E0 - (13536)
The call to VirtualAlloc failed in the Open function of the FileReplicaConn Object. The counter data for this object will not be available. The FileReplicaConn object contains the performance counters of the connections over which files are being replicated by the File Replication Service.
NTFRSPRF_REGISTRY_ERROR_SET - 0xC00034E1 - (13537)
The call to the Registry failed in the Open function of the FileReplicaSet Object. The counter data for this object will not be available. The FileReplicaSet object contains the performance counters of the Replica sets whose files are being replicated by the File Replication Service.
NTFRSPRF_REGISTRY_ERROR_CONN - 0xC00034E2 - (13538)
The call to the Registry failed in the Open function of the FileReplicaConn Object. The counter data for this object will not be available. The FileReplicaConn object contains the performance counters of the connections over which files are being replicated by the File Replication Service.
EVENT_FRS_ROOT_NOT_VALID - 0xC00034E3 - (13539)
The File Replication Service cannot replicate %1 because the pathname of the replicated directory is not the fully qualified pathname of an existing, accessible local directory.
EVENT_FRS_STAGE_NOT_VALID - 0xC00034E4 - (13540)
The File Replication Service cannot replicate %1 because the pathname of the customer designated staging directory: %n %2 %n is not the fully qualified pathname of an existing, accessible local directory.
EVENT_FRS_OVERLAPS_LOGGING - 0xC00034E5 - (13541)
The File Replication Service cannot replicate %1 because it overlaps the File Replication Service's logging pathname %2.
EVENT_FRS_OVERLAPS_WORKING - 0xC00034E6 - (13542)
The File Replication Service cannot replicate %1 because it overlaps the File Replication Service's working directory %2.
EVENT_FRS_OVERLAPS_STAGE - 0xC00034E7 - (13543)
The File Replication Service cannot replicate %1 because it overlaps the staging directory %2.
EVENT_FRS_OVERLAPS_ROOT - 0xC00034E8 - (13544)
The File Replication Service cannot replicate %1 because it overlaps the replicating directory %2.
EVENT_FRS_OVERLAPS_OTHER_STAGE - 0xC00034E9 - (13545)
The File Replication Service cannot replicate %1 because it overlaps the staging directory %2 of the replicating directory %3.
EVENT_FRS_PREPARE_ROOT_FAILED - 0xC00034EA - (13546)
The File Replication Service could not prepare the root directory %1 for replication. This is likely due to a problem creating the root directory or a problem removing preexisting files in the root directory. %n %nCheck that the path leading up to the root directory exists and is accessible.
EVENT_FRS_BAD_REG_DATA - 0x800034EB - (13547)
The File Replication Service detected an invalid parameter value in the registry. %1. %n %nThe expected registry key name is "%2". %nThe expected value name is "%3". %nThe expected registry data type is %4. %nThe allowed range for this parameter is %5 %nThe data units for this parameter value are %6. %nThe File Replication Service is using a default value of "%7". %n %nTo change this parameter, run regedt32. %n %nClick on Start, Run and type regedt32. %n %nClick on the window entitled HKEY_LOCAL_MACHINE. %nClick down the key path: "%8" %nDouble click on the value name - %n "%9" %nand update the value. %nIf the value name is not present you may add it with the Add Value function under the Edit Menu item. Type the value name exactly as shown above using the above registry data type. Make sure you observe the data units and allowed range when entering the value.
EVENT_FRS_JOIN_FAIL_TIME_SKEW - 0xC00034EC - (13548)
The File Replication Service is unable to replicate with its partner computer because the difference in clock times is outside the range of plus or minus %1 minutes. %n %nThe connection to the partner computer is: %n "%2" %nThe detected time difference is: %3 minutes. %n %nNote: If this time difference is close to a multiple of 60 minutes then it is likely that either this computer or its partner computer was set to the incorrect time zone when the computer time was initially set. Check that the time zone and the system time are correctly set on both computers. %n %nIf necessary, the default value used to test for computer time consistency may be changed in the registry on this computer. (Note: This is not recommended.) %n %nTo change this parameter, run regedt32. %n %nClick on Start, Run and type regedt32. %n %nClick on the window entitled HKEY_LOCAL_MACHINE. %nClick down the key path: %n "System\CurrentControlSet\Services\NtFrs\Parameters" %nDouble click on the value name %n "Partner Clock Skew In Minutes" %nand update the value. %n %nIf the value name is not present you may add it with the Add Value function under the Edit Menu item. Type the value name exactly as shown above using the the registry data type REG_DWORD.
EVENT_FRS_RMTCO_TIME_SKEW - 0xC00034ED - (13549)
The File Replication Service is unable to replicate from a partner computer because the event time associated with the file to be replicated is too far into the future. It is %1 minutes greater than the current time. This can happen if the system time on the partner computer was set incorrectly when the file was created or updated. To preserve the integrity of the replica set this file update will not be performed or propagated further. %n %nThe file name is: "%2" %nThe connection to the partner computer is: %n "%3" %n %nNote: If this time difference is close to a multiple of 60 minutes then it is likely that this file may have been created or updated on the partner computer while the computer was set to the incorrect time zone when its computer time was initially set. Check that the timezone and time are correctly set on the partner computer.
EVENT_FRS_CANT_OPEN_STAGE - 0xC00034EE - (13550)
The File Replication Service is unable to open the customer designated staging directory for replica set %1. The path used for the staging directory is, %n "%2" %nThe customer designated root path for this replica set is: %n "%3" %n The service is unable to start replication on this replica set. Among the possible errors to check are: %n -- an invalid staging path, %n -- a missing directory, %n -- a missing disk volume, %n -- a file system on the volume that does not support ACLs, %n -- a sharing conflict on the staging directory with some other application. %n %nCorrect the problem and the service will attempt to restart replication automatically at a later time.
EVENT_FRS_CANT_OPEN_PREINSTALL - 0xC00034EF - (13551)
The File Replication Service is unable to open (or create) the pre-install directory under the customer designated replica tree directory for replica set %1. The path used for the pre-install directory is, %n "%2" %nThe customer designated root path for this replica set is: %n "%3" %n The service is unable to start replication on this replica set. Among the possible errors to check are: %n -- an invalid root path, %n -- a missing directory, %n -- a missing disk volume, %n -- a file system on the volume that does not support NTFS 5.0 %n -- a sharing conflict on the pre-install directory with some other application. %n %nCorrect the problem and the service will attempt to restart replication automatically at a later time.
EVENT_FRS_REPLICA_SET_CREATE_FAIL - 0xC00034F0 - (13552)
The File Replication Service is unable to add this computer to the following replica set: %n "%1" %n %nThis could be caused by a number of problems such as: %n -- an invalid root path, %n -- a missing directory, %n -- a missing disk volume, %n -- a file system on the volume that does not support NTFS 5.0 %n %nThe information below may help to resolve the problem: %nComputer DNS name is "%2" %nReplica set member name is "%3" %nReplica set root path is "%4" %nReplica staging directory path is "%5" %nReplica working directory path is "%6" %nWindows error status code is %7 %nFRS error status code is %8 %n %nOther event log messages may also help determine the problem. Correct the problem and the service will attempt to restart replication automatically at a later time.
EVENT_FRS_REPLICA_SET_CREATE_OK - 0x400034F1 - (13553)
The File Replication Service successfully added this computer to the following replica set: %n "%1" %n %nInformation related to this event is shown below: %nComputer DNS name is "%2" %nReplica set member name is "%3" %nReplica set root path is "%4" %nReplica staging directory path is "%5" %nReplica working directory path is "%6"
EVENT_FRS_REPLICA_SET_CXTIONS - 0x400034F2 - (13554)
The File Replication Service successfully added the connections shown below to the replica set: %n "%1" %n %n %2 %n %3 %n %4 %n %5 %n %6 %n %7 %n %8 %n %9 %n %nMore information may appear in subsequent event log messages.
EVENT_FRS_IN_ERROR_STATE - 0xC00034F3 - (13555)
The File Replication Service is in an error state. Files will not replicate to or from one or all of the replica sets on his computer until the following recovery steps are performed: %n %n Recovery Steps: %n %n [1] The error state may clear itself if you stop and restart the FRS service. This can be done by performing the following in a command window: %n %n net stop ntfrs %n net start ntfrs %n %nIf this fails to clear up the problem then proceed as follows. %n %n [2] For Active Directory Domain Controllers that DO NOT host any DFS alternates or other replica sets with replication enabled: %n %nIf there is at least one other Domain Controller in this domain then restore the "system state" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative. %n %nIf there are NO other Domain Controllers in this domain then restore the "system state" of this DC from backup (using ntbackup or other backup-restore utility) and choose the Advanced option which marks the sysvols as primary. %n %nIf there are other Domain Controllers in this domain but ALL of them have this event log message then restore one of them as primary (data files from primary will replicate everywhere) and the others as non-authoritative. %n %n %n [3] For Active Directory Domain Controllers that host DFS alternates or other replica sets with replication enabled: %n %n (3-a) If the Dfs alternates on this DC do not have any other replication partners then copy the data under that Dfs share to a safe location. %n (3-b) If this server is the only Active Directory Domain Controller for this domain then, before going to (3-c), make sure this server does not have any inbound or outbound connections to other servers that were formerly Domain Controllers for this domain but are now off the net (and will never be coming back online) or have been fresh installed without being demoted. To delete connections use the Sites and Services snapin and look for %nSites->NAME_OF_SITE->Servers->NAME_OF_SERVER->NTDS Settings->CONNECTIONS. %n (3-c) Restore the "system state" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative. %n (3-d) Copy the data from step (3-a) above to the original location after the sysvol share is published. %n %n %n [4] For other Windows 2000 servers: %n %n (4-a) If any of the DFS alternates or other replica sets hosted by this server do not have any other replication partners then copy the data under its share or replica tree root to a safe location. %n (4-b) net stop ntfrs %n (4-c) rd /s /q %1 %n (4-d) net start ntfrs %n (4-e) Copy the data from step (4-a) above to the original location after the service has initialized (5 minutes is a safe waiting time). %n %nNote: If this error message is in the eventlog of all the members of a particular replica set then perform steps (4-a) and (4-e) above on only one of the members.
EVENT_FRS_REPLICA_NO_ROOT_CHANGE - 0xC00034F4 - (13556)
The File Replication Service has detected what appears to be an attempt to change the root path for the following replica set: %n "%1" %n %nThis is not allowed. To perform this operation you must remove this member from the replica set and add the member back with the new root path. %n %nIt is possible that this is a transient error due to Active Directory replication delays associated with updating FRS configuration objects. If file replication does not take place after an appropriate waiting time, which could be several hours if cross site Active Directory replication is required, you must delete and re-add this member to the replica set. %n %nInformation related to this event is shown below: %nComputer DNS name is "%2" %nReplica set member name is "%3" %nThe current Replica set root path is "%4" %nThe desired new Replica set root path is "%5" %nReplica staging directory path is "%6"
EVENT_FRS_DUPLICATE_IN_CXTION_SYSVOL - 0xC00034F5 - (13557)
The File Replication Service has detected a duplicate connection object between this computer "%6" and a computer named "%1". %nThis was detected for the following replica set: %n "%2" %n %nThis is not allowed and replication will not occur between these two computers until the duplicate connection objects are removed. %n %nIt is possible that this is a transient error due to Active Directory replication delays associated with updating FRS configuration objects. If file replication does not take place after an appropriate waiting time, which could be several hours if cross site Active Directory replication is required, you must manually delete the duplicate connection objects by following the steps below: %n %n [1] Start the Active Directory Sites and Services Snapin. %n [2] Click on "%3, %4, %5, %6, %7". %n [3] Look for duplicate connections from "%1" in site "%8". %n [4] Delete all but one of the connections.
EVENT_FRS_DUPLICATE_IN_CXTION - 0xC00034F6 - (13558)
The File Replication Service has detected a duplicate connection object between this computer "%7" and a computer named "%1". %nThis was detected for the following replica set: %n "%2" %n %nThis is not allowed and replication will not occur between these two computers until the duplicate connection objects are removed. %n %nIt is possible that this is a transient error due to Active Directory replication delays associated with updating FRS configuration objects. If file replication does not take place after an appropriate waiting time, which could be several hours if cross site Active Directory replication is required, you must manually delete the duplicate connection objects by following the steps below: %n %n [1] Start the Active Directory Users and Computers Snapin. %n [2] Click the view button and advanced features to display the system node. %n [3] Click on "%3, %4, %5". %n [4] Under "%5" you will see one or more DFS related replica set objects. Look for the FRS member object "%6" under the subtree for replica set "%2". %n [5] Under "%6" look for duplicate connections from "%1". %n [6] Delete all but one of the connections.
EVENT_FRS_ROOT_HAS_MOVED - 0xC00034F7 - (13559)
The File Replication Service has detected that the replica root path has changed from "%2" to "%3". If this is an intentional move then a file with the name NTFRS_CMD_FILE_MOVE_ROOT needs to be created under the new root path. %nThis was detected for the following replica set: %n "%1" %n %nChanging the replica root path is a two step process which is triggered by the creation of the NTFRS_CMD_FILE_MOVE_ROOT file. %n %n [1] At the first poll which will occur in %4 minutes this computer will be deleted from the replica set. %n [2] At the poll following the deletion this computer will be re-added to the replica set with the new root path. This re-addition will trigger a full tree sync for the replica set. At the end of the sync all the files will be at the new location. The files may or may not be deleted from the old location depending on whether they are needed or not.
EVENT_FRS_ERROR_REPLICA_SET_DELETED - 0x800034F8 - (13560)
The File Replication Service is deleting this computer from the replica set "%1" as an attempt to recover from the error state, %n Error status = %2 %n At the next poll, which will occur in %3 minutes, this computer will be re-added to the replica set. The re-addition will trigger a full tree sync for the replica set.
EVENT_FRS_REPLICA_IN_JRNL_WRAP_ERROR - 0xC00034F9 - (13561)
The File Replication Service has detected that the replica set "%1" is in JRNL_WRAP_ERROR. %n %n Replica set name is : "%1" %n Replica root path is : "%2" %n Replica root volume is : "%3" %n A Replica set hits JRNL_WRAP_ERROR when the record that it is trying to read from the NTFS USN journal is not found. This can occur because of one of the following reasons. %n %n [1] Volume "%3" has been formatted. %n [2] The NTFS USN journal on volume "%3" has been deleted. %n [3] The NTFS USN journal on volume "%3" has been truncated. Chkdsk can truncate the journal if it finds corrupt entries at the end of the journal. %n [4] File Replication Service was not running on this computer for a long time. %n [5] File Replication Service could not keep up with the rate of Disk IO activity on "%3". %n %n Following recovery steps will be taken to automatically recover from this error state. %n [1] At the first poll which will occur in %4 minutes this computer will be deleted from the replica set. %n [2] At the poll following the deletion this computer will be re-added to the replica set. The re-addition will trigger a full tree sync for the replica set.
EVENT_FRS_DS_POLL_ERROR_SUMMARY - 0x800034FA - (13562)
Following is the summary of warnings and errors encountered by File Replication Service while polling the Domain Controller %1 for FRS replica set configuration information. %n %n %2 %n
EVENT_PS_GPC_REGISTER_FAILED - 0xC00036B0 - (14000)
QoS: The Packet Scheduler failed to register with the Generic Packet Classifier (msgpc.sys).
EVENT_PS_NO_RESOURCES_FOR_INIT - 0xC00036B1 - (14001)
QoS: The Packet Scheduler was unable to allocate required resources for initialization.
EVENT_PS_REGISTER_PROTOCOL_FAILED - 0xC00036B2 - (14002)
QoS: The Packet Scheduler failed to register as a protocol with NDIS.
EVENT_PS_REGISTER_MINIPORT_FAILED - 0xC00036B3 - (14003)
QoS: The Packet Scheduler failed to register as a miniport with NDIS.
EVENT_PS_BAD_BESTEFFORT_LIMIT - 0x80003714 - (14100)
QoS [Adapter %2]:%nThe BestEffortLimit value set in the registry exceeds the LinkSpeed. Defaulting to Unlimited BestEffort.
EVENT_PS_QUERY_OID_GEN_MAXIMUM_FRAME_SIZE - 0xC0003715 - (14101)
QoS [Adapter %2]:%nThe network adapter driver failed the query for OID_GEN_MAXIMUM_FRAME_SIZE.
EVENT_PS_QUERY_OID_GEN_MAXIMUM_TOTAL_SIZE - 0xC0003716 - (14102)
QoS [Adapter %2]:%nThe network adapter driver failed the query for OID_GEN_MAXIMUM_TOTAL_SIZE.
EVENT_PS_QUERY_OID_GEN_LINK_SPEED - 0xC0003717 - (14103)
QoS [Adapter %2]:%nThe network adapter driver failed the query for OID_GEN_LINK_SPEED.
EVENT_PS_BINDING_FAILED - 0xC0003718 - (14104)
QoS [Adapter %2]:%nThe Packet Scheduler failed to bind to the network adapter's miniport driver.
EVENT_PS_MISSING_ADAPTER_REGISTRY_DATA - 0xC0003719 - (14105)
QoS [Adapter %2]:%nThe UpperBindings key is missing from the registry.
EVENT_PS_REGISTER_ADDRESS_FAMILY_FAILED - 0xC000371A - (14106)
QoS [Adapter %2]:%nThe Packet Scheduler was unable to register with the NDISWAN Call Manager.
EVENT_PS_INIT_DEVICE_FAILED - 0xC000371B - (14107)
QoS [Adapter %2]:%nThe Packet Scheduler could not initialize the virtual miniport with NDIS.
EVENT_PS_WMI_INSTANCE_NAME_FAILED - 0xC000371C - (14108)
QoS [Adapter %2]:%nThe Packet Scheduler could not obtain the network adapter's friendly name from NDIS.
EVENT_PS_WAN_LIMITED_BESTEFFORT - 0x8000371D - (14109)
QoS [Adapter %2]:%nThe registry entry for BestEffortLimit is not supported over WAN links. Defaulting to Unlimited BestEffort mode.
EVENT_PS_RESOURCE_POOL - 0xC000371E - (14110)
QoS [Adapter %2]:%nCould not initialize due to insufficient nonpaged pool memory.
EVENT_PS_ADMISSIONCONTROL_OVERFLOW - 0x8000371F - (14111)
QoS [Adapter %2]:%nTotal bandwidth allocated to flows exceeds the NonBestEffortLimit. This is because of a reduction in the LinkSpeed or because of a change to the NonBestEffortLimit registry key.
EVENT_PS_NETWORK_ADDRESS_FAIL - 0xC0003720 - (14112)
QoS [Adapter %2]:%nCould not allocate non-paged pool memory for storing network addresses.
EXTRA_EXIT_POINT - 0xC00037DC - (14300)
An extra ExitPoint %2 was found at server %3
MISSING_EXIT_POINT - 0xC00037DD - (14301)
The ExitPoint %2 was missing at server %3
MISSING_VOLUME - 0xC00037DE - (14302)
The Volume %2 was missing at server %3
EXTRA_VOLUME - 0xC00037DF - (14303)
The extra Volume %2 was found at server %3
EXTRA_EXIT_POINT_DELETED - 0xC00037E0 - (14304)
The extra ExitPoint %2 was deleted successfully from the server %3
EXTRA_EXIT_POINT_NOT_DELETED - 0xC00037E1 - (14305)
Unable to delete the extra ExitPoint %2 at the server %3
MISSING_EXIT_POINT_CREATED - 0xC00037E2 - (14306)
The missing ExitPoint %2 was created at the server %3 successfully
MISSING_EXIT_POINT_NOT_CREATED - 0xC00037E3 - (14307)
Unable to create the missing Exit Point %2 at the server %3
MISSING_VOLUME_CREATED - 0xC00037E4 - (14308)
Successfully created the missing volume %2 knowledge at the server %3
MISSING_VOLUME_NOT_CREATED - 0xC00037E5 - (14309)
Unable to create the missing Volume %2 info at server %3
EXTRA_VOLUME_DELETED - 0xC00037E6 - (14310)
The extra Volume %2 info was deleted at server %3
EXTRA_VOLUME_NOT_DELETED - 0xC00037E7 - (14311)
The extra Volume %2 info was not deleted at server %3
COULD_NOT_VERIFY_VOLUMES - 0xC00037E8 - (14312)
Since the DC %2 was unavailable could not verify volumes knowledge.
KNOWLEDGE_INCONSISTENCY_DETECTED - 0xC00037E9 - (14313)
Detected Knowledge inconsistency with the volume %2 at server %3
PREFIX_MISMATCH - 0xC00037EA - (14314)
The local Prefix %2 was represented as %3 at remote server %4
PREFIX_MISMATCH_FIXED - 0xC00037EB - (14315)
The remote Prefix %3 was corrected to %2 at remote server %4
PREFIX_MISMATCH_NOT_FIXED - 0xC00037EC - (14316)
The remote Prefix %3 was NOT corrected to %2 at remote server %4
MACHINE_UNJOINED - 0xC00037ED - (14317)
The machine %2 has become unlinked from the domain. Re-join the machine the machine to this domain.
DFS_REFERRAL_REQUEST - 0x400037EE - (14318)
Dfs received a referral request for "%2". The return code is in the data.
NOT_A_DFS_PATH - 0x40003840 - (14400)
The path "%2" is not a dfs path
LM_REDIR_FAILURE - 0x40003841 - (14401)
Dfs was unable to open the Lan Redir
DFS_CONNECTION_FAILURE - 0x40003842 - (14402)
Dfs was unable to open a connection to server %2. The error returned is in the record data.
DFS_REFERRAL_FAILURE - 0x40003843 - (14403)
Dfs was unable to obtain a referral for "%2" from %3. The error returned is in the record data.
DFS_REFERRAL_SUCCESS - 0x40003844 - (14404)
Dfs obtained a referral for "%2" from %3
DFS_MAX_DNR_ATTEMPTS - 0x40003845 - (14405)
Dfs reached its limit of attempts of resolution of "%2".
DFS_SPECIAL_REFERRAL_FAILURE - 0x40003846 - (14406)
Dfs was unable to obtain the special referral table from %2. The error returned is in the record data.
DFS_OPEN_FAILURE - 0x40003847 - (14407)
Dfs failed on open of %2 directed to %3. The error returned is in the record data.
NET_DFS_ENUM - 0x400038A4 - (14500)
NetrDfsEnum received an enumeration. The return code is in the record data.
NET_DFS_ENUMEX - 0x400038A5 - (14501)
NetrDfsEnumEx received an enumeration. The return code is in the record data.
DFS_ERROR_CREATE_REPARSEPOINT_FAILURE - 0xC00038A7 - (14503)
Dfs could not create reparse point for directory %1 under directory %2. The return code is in the record data.
DFS_ERROR_UNSUPPORTED_FILESYSTEM - 0xC00038A8 - (14504)
Share %1 mapped to %2 does not support reparse points. Upgrade Filesystem and retry.
DFS_ERROR_OVERLAPPING_DIRECTORIES - 0xC00038A9 - (14505)
Share %1 mapped to %2 directory overlaps an existing root. The DFS Root will not be created.
DFS_INFO_ACTIVEDIRECTORY_ONLINE - 0x400038AC - (14508)
DFS re-established a connection to the PDC to initiate Domain DFS operations.
DFS_ERROR_TOO_MANY_ERRORS - 0xC00038AD - (14509)
Root %1 has too many errors. No further eventlogs will be logged on this root.
DFS_ERROR_WINSOCKINIT_FAILED - 0xC00038AE - (14510)
DFS could not initialize winsock library. The return code is in the record data.
DFS_ERROR_SECURITYINIT_FAILED - 0xC00038AF - (14511)
DFS could not initialize security library. The return code is in the record data.
DFS_ERROR_THREADINIT_FAILED - 0xC00038B0 - (14512)
DFS could not create DFS support thread. The return code is in the record data.
DFS_ERROR_SITECACHEINIT_FAILED - 0xC00038B1 - (14513)
DFS could not initialize IP site cache. The return code is in the record data.
DFS_ERROR_ROOTSYNCINIT_FAILED - 0xC00038B2 - (14514)
DFS could not synchronize all DFS roots. The return code is in the record data.
DFS_ERROR_CREATEEVENT_FAILED - 0xC00038B3 - (14515)
DFS could not create event handle. The return code is in the record data.
DFS_ERROR_COMPUTERINFO_FAILED - 0xC00038B4 - (14516)
DFS could not get required computer information. The return code is in the record data.
DFS_ERROR_CLUSTERINFO_FAILED - 0xC00038B5 - (14517)
DFS could not get required cluster information. The return code is in the record data.
DFS_ERROR_DCINFO_FAILED - 0xC00038B6 - (14518)
DFS could not get required DC information. The return code is in the record data.
DFS_ERROR_PREFIXTABLE_FAILED - 0xC00038B7 - (14519)
DFS could not initialize prefix table. The return code is in the record data.
DFS_ERROR_HANDLENAMESPACE_FAILED - 0xC00038B8 - (14520)
DFS could not initialize DFS namespace.The return code is in the record data.
DFS_ERROR_REGISTERSTORE_FAILED - 0xC00038B9 - (14521)
DFS could not Register DFS Namespaces. The return code is in the record data.
DFS_ERROR_REFLECTIONENGINE_FAILED - 0xC00038BA - (14522)
DFS could not initialize User/kernel communication package. The return code is in the record data.
DFS_ERROR_ACTIVEDIRECTORY_OFFLINE - 0xC00038BB - (14523)
DFS could not contact any DC for Domain DFS operations. This operation will be retried periodically.
DFS_ERROR_SITESUPPOR_FAILED - 0xC00038BC - (14524)
DFS could not initialize site support table. The return code is in the record data.
DFS_ERROR_DSCONNECT_FAILED - 0x800038BE - (14526)
DFS could not contact the %1 Active Directory. DFS will be using cached data. The return code is in the record data.
DFS_INFO_DS_RECONNECTED - 0x400038C1 - (14529)
DFS has connected to the %1 Active Directory.
DFS_ERROR_NO_DFS_DATA - 0xC00038C2 - (14530)
DFS could not access its private data from the Active Directory. Please manually check network connectivity, security access, and/or consistency of DFS information in the Active Directory. This error occurred on root %1.
DFS_INFO_FINISH_INIT - 0x400038C3 - (14531)
DFS server has finished initializing.
DFS_INFO_RECONNECT_DATA - 0x400038C4 - (14532)
DFS has recovered from an error and is able to read its private data from the Active Directory. Root %1 is now able to read information from the Active Directory.
DFS_INFO_FINISH_BUILDING_NAMESPACE - 0x400038C5 - (14533)
DFS has finished building all namespaces.
DFS_ERROR_ON_ROOT - 0x800038C6 - (14534)
DFS Root %1 failed during initialization. The root will not be available.
DFS_ERROR_MUTLIPLE_ROOTS_NOT_SUPPORTED - 0xC00038C7 - (14535)
DFS does not support multiple roots on Standard server SKU. Please cleanup the roots or upgrade.
DFS_WARN_DOMAIN_REFERRAL_OVERFLOW - 0x800038C8 - (14536)
DFS is unable to return the entire list of trusted domains to the client. There are too many trusted domains.
DFS_INFO_DOMAIN_REFERRAL_MIN_OVERFLOW - 0x400038C9 - (14537)
DFS is requesting the client for a larger buffer for trusted domain information. Some Win98 clients may not be able to access DFS namespaces.
DFS_WARN_INCOMPLETE_MOVE - 0x800038CA - (14538)
DFS was unable to move all matching links of root: %1 for path %2 to new path %3
DFS_ERROR_RESYNCHRONIZE_FAILED - 0xC00038CB - (14539)
DFS was unable to resynchronize this root target for root: %1. This may lead to inaccessability of portions of the DFS namespace. Please verify the share %1 has all the link directories created for the DFS links. This error may occur if there are directories on this share that may be preventing creation of links.
DFS_ERROR_REMOVE_LINK_FAILED - 0xC00038CC - (14540)
DFS was unable to delete link: %2 for root: %1 during a link move operation.
DFS_WARN_METADATA_LINK_TYPE_INCORRECT - 0x800038CD - (14541)
DFS link %1 was marked incorrectly as a DFS root. The DFS namespace is operational on this server. If this namespace is hosted on servers running Windows Server 2003 prior to Service Pack 2 (SP2), or if the server is running Windows 2000 Server, the namespace might not be fully functional on those servers. Please consult the Microsoft Knowledge Base for more information on correcting this issue.
DFS_WARN_METADATA_LINK_INFO_INVALID - 0x800038CE - (14542)
DFS metadata object %1 is empty in the metadata for DFS root %2. The DFS namespace is operational on this server. If this namespace is hosted on servers running Windows Server 2003 prior to Service Pack 2 (SP2), or if the server is running Windows 2000 Server, the namespace might not be fully functional on those servers. Please consult the Microsoft Knowledge Base for more information on correcting this issue.
DFS_ERROR_TARGET_LIST_INCORRECT - 0xC00038CF - (14543)
The list of folder targets for the following Distributed File System (DFS) folder is corrupt. DFS folder: %1
DFS_ERROR_LINKS_OVERLAP - 0xC00038D0 - (14544)
A Distributed File System (DFS) folder with folder targets was created that contains other DFS folders. This can occur if two administrators on different namespace servers create conflicting folder structures at approximately the same time. Namespace: %1 DFS folder 1: %2 DFS folder 2: %3
DFS_ERROR_LINK_OVERLAP - 0xC00038D1 - (14545)
A Distributed File System (DFS) folder with folder targets was created that contains other DFS folders. This can occur if two administrators on different namespace servers create conflicting folder structures at approximately the same time. Namespace: %1 DFS folder: %2
DFS_ERROR_CREATE_REPARSEPOINT_SUCCESS - 0x400038D2 - (14546)
Dfs successfully created the reparse point for directory %1 under directory %2. This operation had previously failed.
DFS_ERROR_DUPLICATE_LINK - 0xC00038D3 - (14547)
A Distributed File System (DFS) folder was created with conflicting descriptions. This can occur if two administrators on different namespace servers create conflicting folder structures at approximately the same time. Namespace: %1 DFS folder path: %2 DFS folder 1: %3 DFS folder 2: %4
DFS_ERROR_TRUSTED_DOMAIN_INFO_FAILED - 0xC00038D4 - (14548)
The DFS Namespace service could not initialize the trusted domain information on this domain controller, but it will periodically retry the operation. The return code is in the record data.
DFS_INFO_TRUSTED_DOMAIN_INFO_SUCCESS - 0x400038D5 - (14549)
The DFS Namespace service successfully initialized the trusted domain information on this domain controller.
DFS_ERROR_CROSS_FOREST_TRUST_INFO_FAILED - 0xC00038D6 - (14550)
The DFS Namespace service could not initialize cross forest trust information on this domain controller, but it will periodically retry the operation. The return code is in the record data.
DFS_INFO_CROSS_FOREST_TRUST_INFO_SUCCESS - 0x400038D7 - (14551)
The DFS Namespace service successfully initialized cross forest trust information on this domain controller.
DFS_INIT_SUCCESS - 0x400038D8 - (14552)
The DFS Namespaces service has successfully initialized the following namespace: %1
DFS_ROOT_SHARE_ACQUIRE_FAILED - 0x800038D9 - (14553)
The DFS Namespaces service failed to initialize the shared folder that hosts the namespace root. Shared folder: %1
DFS_ROOT_SHARE_ACQUIRE_SUCCESS - 0x400038DA - (14554)
The DFS Namespaces service has successfully initialized the shared folder that hosts the namespace root. Shared folder: %1
EVENT_BRIDGE_PROTOCOL_REGISTER_FAILED - 0xC0003908 - (14600)
Bridge: The bridge could not be initialized because the bridge failed to register as a protocol with NDIS.
EVENT_BRIDGE_MINIPROT_DEVNAME_MISSING - 0xC0003909 - (14601)
Bridge: The bridge could not be initialized because the bridge's miniport device name is missing from the registry.
EVENT_BRIDGE_MINIPORT_REGISTER_FAILED - 0xC000390A - (14602)
Bridge: The bridge could not be initialized because the bridge failed to register as a miniport with NDIS.
EVENT_BRIDGE_DEVICE_CREATION_FAILED - 0xC000390B - (14603)
Bridge: The bridge could not be initialized because the bridge failed to create a device object.
EVENT_BRIDGE_NO_BRIDGE_MAC_ADDR - 0xC000390C - (14604)
Bridge: The bridge could not be initialized because the bridge failed to determine a MAC address for itself.
EVENT_BRIDGE_MINIPORT_INIT_FAILED - 0xC000390D - (14605)
Bridge: The bridge failed to create its virtual miniport.
EVENT_BRIDGE_ETHERNET_NOT_OFFERED - 0xC000390E - (14606)
Bridge: The bridge could not initialize its miniport because Ethernet was not offered as a supported medium.
EVENT_BRIDGE_THREAD_CREATION_FAILED - 0xC000390F - (14607)
Bridge: The bridge could not initialize because it failed to create a system thread.
EVENT_BRIDGE_THREAD_REF_FAILED - 0xC0003910 - (14608)
Bridge: The bridge could not initialize because it failed to reference its system thread.
EVENT_BRIDGE_PACKET_POOL_CREATION_FAILED - 0xC0003911 - (14609)
Bridge: The bridge could not initialize because it failed to create a packet pool.
EVENT_BRIDGE_BUFFER_POOL_CREATION_FAILED - 0xC0003912 - (14610)
Bridge: The bridge could not initialize because it failed to create a buffer pool.
EVENT_BRIDGE_INIT_MALLOC_FAILED - 0xC0003913 - (14611)
Bridge: The bridge could not initialize because it failed to allocate memory.
EVENT_BRIDGE_ADAPTER_LINK_SPEED_QUERY_FAILED - 0xC000396C - (14700)
Bridge [Adapter %2]:%nThe bridge could not determine the network adapter's link speed. The network adapter will not be used.
EVENT_BRIDGE_ADAPTER_MAC_ADDR_QUERY_FAILED - 0xC000396D - (14701)
Bridge [Adapter %2]:%nThe bridge could not determine the network adapter's MAC address. The network adapter will not be used.
EVENT_BRIDGE_ADAPTER_FILTER_FAILED - 0xC000396E - (14702)
Bridge [Adapter %2]:%nThe bridge could not modify the network adapter's packet filter. The network adapter will not function correctly.
EVENT_BRIDGE_ADAPTER_NAME_QUERY_FAILED - 0xC000396F - (14703)
Bridge [Adapter %2]:%nThe bridge could not retrieve the network adapter's description string. The network adapter will not be used.
EVENT_BRIDGE_ADAPTER_BIND_FAILED - 0xC0003970 - (14704)
Bridge [Adapter %2]:%nThe bridge failed to bind to the network adapter. The network adapter will not be used.
EVENT_DAV_REDIR_DELAYED_WRITE_FAILED - 0x800039D0 - (14800)
Windows was unable to save data for file %2. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere.
EVENT_WEBCLIENT_CLOSE_PUT_FAILED - 0x80003A35 - (14901)
PUT failed for file %1 on Close. ErrorStatus: %2.
EVENT_WEBCLIENT_CLOSE_DELETE_FAILED - 0x80003A36 - (14902)
DELETE failed for file %1 on Close. ErrorStatus: %2.
EVENT_WEBCLIENT_CLOSE_PROPPATCH_FAILED - 0x80003A37 - (14903)
PROPPATCH failed for file %1 on Close. ErrorStatus: %2.
EVENT_WEBCLIENT_SETINFO_PROPPATCH_FAILED - 0x80003A38 - (14904)
PROPPATCH failed for file %1 on SetFileInfo. ErrorStatus: %2.
EVENT_WSK_OWNINGTHREAD_PARAMETER_IGNORED - 0xC0003E80 - (16000)
WSK provider has ignored the OwningThread parameter passed to a WSK socket creation request. This happens when the socket needs to be created over a TDI transport provider either because a TDI filter driver is installed or because a client-specified TDI mapping exists that matches the AddressFamily, socketType, and Protocol specified in the socket creation request.
EVENT_WINSOCK_TDI_FILTER_DETECTED - 0x80003E81 - (16001)
A TDI filter (%2) was detected. This filter has not been certified by Microsoft and may cause system instability.
EVENT_WINSOCK_CLOSESOCKET_STUCK - 0x80003E82 - (16002)
Closing a %2 socket with local port number %3 in process %4 is taking longer than expected. The local port number may not be available until the close operation is completed. This happens typically due to misbehaving network drivers. Ensure latest updates are installed for Windows and any third-party networking software including NIC drivers, firewalls, or other security products.
E_NOTIMPL - 0x80004001 - (16385)
Not implemented
E_NOINTERFACE - 0x80004002 - (16386)
No such interface supported
E_POINTER - 0x80004003 - (16387)
Invalid pointer
E_ABORT - 0x80004004 - (16388)
Operation aborted
E_FAIL - 0x80004005 - (16389)
Unspecified error
CO_E_INIT_TLS - 0x80004006 - (16390)
Thread local storage failure
CO_E_INIT_SHARED_ALLOCATOR - 0x80004007 - (16391)
Get shared memory allocator failure
CO_E_INIT_MEMORY_ALLOCATOR - 0x80004008 - (16392)
Get memory allocator failure
CO_E_INIT_CLASS_CACHE - 0x80004009 - (16393)
Unable to initialize class cache
CO_E_INIT_RPC_CHANNEL - 0x8000400A - (16394)
Unable to initialize RPC services
CO_E_INIT_TLS_SET_CHANNEL_CONTROL - 0x8000400B - (16395)
Cannot set thread local storage channel control
CO_E_INIT_TLS_CHANNEL_CONTROL - 0x8000400C - (16396)
Could not allocate thread local storage channel control
CO_E_INIT_UNACCEPTED_USER_ALLOCATOR - 0x8000400D - (16397)
The user supplied memory allocator is unacceptable
CO_E_INIT_SCM_MUTEX_EXISTS - 0x8000400E - (16398)
The OLE service mutex already exists
CO_E_INIT_SCM_FILE_MAPPING_EXISTS - 0x8000400F - (16399)
The OLE service file mapping already exists
CO_E_INIT_SCM_MAP_VIEW_OF_FILE - 0x80004010 - (16400)
Unable to map view of file for OLE service
CO_E_INIT_SCM_EXEC_FAILURE - 0x80004011 - (16401)
Failure attempting to launch OLE service
CO_E_INIT_ONLY_SINGLE_THREADED - 0x80004012 - (16402)
There was an attempt to call CoInitialize a second time while single threaded
CO_E_CANT_REMOTE - 0x80004013 - (16403)
A Remote activation was necessary but was not allowed
CO_E_BAD_SERVER_NAME - 0x80004014 - (16404)
A Remote activation was necessary but the server name provided was invalid
CO_E_WRONG_SERVER_IDENTITY - 0x80004015 - (16405)
The class is configured to run as a security id different from the caller
CO_E_OLE1DDE_DISABLED - 0x80004016 - (16406)
Use of Ole1 services requiring DDE windows is disabled
CO_E_RUNAS_SYNTAX - 0x80004017 - (16407)
A RunAs specification must be <domain name>\<user name> or simply <user name>
CO_E_CREATEPROCESS_FAILURE - 0x80004018 - (16408)
The server process could not be started. The pathname may be incorrect.
CO_E_RUNAS_CREATEPROCESS_FAILURE - 0x80004019 - (16409)
The server process could not be started as the configured identity. The pathname may be incorrect or unavailable.
CO_E_RUNAS_LOGON_FAILURE - 0x8000401A - (16410)
The server process could not be started because the configured identity is incorrect. Check the username and password.
CO_E_LAUNCH_PERMSSION_DENIED - 0x8000401B - (16411)
The client is not allowed to launch this server.
CO_E_START_SERVICE_FAILURE - 0x8000401C - (16412)
The service providing this server could not be started.
CO_E_REMOTE_COMMUNICATION_FAILURE - 0x8000401D - (16413)
This computer was unable to communicate with the computer providing the server.
CO_E_SERVER_START_TIMEOUT - 0x8000401E - (16414)
The server did not respond after being launched.
CO_E_CLSREG_INCONSISTENT - 0x8000401F - (16415)
The registration information for this server is inconsistent or incomplete.
CO_E_IIDREG_INCONSISTENT - 0x80004020 - (16416)
The registration information for this interface is inconsistent or incomplete.
CO_E_NOT_SUPPORTED - 0x80004021 - (16417)
The operation attempted is not supported.
CO_E_RELOAD_DLL - 0x80004022 - (16418)
A dll must be loaded.
CO_E_MSI_ERROR - 0x80004023 - (16419)
A Microsoft Software Installer error was encountered.
CO_E_ATTEMPT_TO_CREATE_OUTSIDE_CLIENT_CONTEXT - 0x80004024 - (16420)
The specified activation could not occur in the client context as specified.
CO_E_SERVER_PAUSED - 0x80004025 - (16421)
Activations on the server are paused.
CO_E_SERVER_NOT_PAUSED - 0x80004026 - (16422)
Activations on the server are not paused.
CO_E_CLASS_DISABLED - 0x80004027 - (16423)
The component or application containing the component has been disabled.
CO_E_CLRNOTAVAILABLE - 0x80004028 - (16424)
The common language runtime is not available
CO_E_ASYNC_WORK_REJECTED - 0x80004029 - (16425)
The thread-pool rejected the submitted asynchronous work.
CO_E_SERVER_INIT_TIMEOUT - 0x8000402A - (16426)
The server started, but did not finish initializing in a timely fashion.
CO_E_NO_SECCTX_IN_ACTIVATE - 0x8000402B - (16427)
Unable to complete the call since there is no COM+ security context inside IObjectControl.Activate.
CO_E_TRACKER_CONFIG - 0x80004030 - (16432)
The provided tracker configuration is invalid
CO_E_THREADPOOL_CONFIG - 0x80004031 - (16433)
The provided thread pool configuration is invalid
CO_E_SXS_CONFIG - 0x80004032 - (16434)
The provided side-by-side configuration is invalid
CO_E_MALFORMED_SPN - 0x80004033 - (16435)
The server principal name (SPN) obtained during security negotiation is malformed.
CO_E_UNREVOKED_REGISTRATION_ON_APARTMENT_SHUTDOWN - 0x80004034 - (16436)
The caller failed to revoke a per-apartment registration before apartment shutdown.
CO_E_PREMATURE_STUB_RUNDOWN - 0x80004035 - (16437)
The object has been rundown by the stub manager while there are external clients.
EVENT_EQOS_INFO_MACHINE_POLICY_REFRESH_NO_CHANGE - 0x40004074 - (16500)
Computer QoS policies successfully refreshed. No changes detected.
EVENT_EQOS_INFO_MACHINE_POLICY_REFRESH_WITH_CHANGE - 0x40004075 - (16501)
Computer QoS policies successfully refreshed. Policy changes detected.
EVENT_EQOS_INFO_USER_POLICY_REFRESH_NO_CHANGE - 0x40004076 - (16502)
User QoS policies successfully refreshed. No changes detected.
EVENT_EQOS_INFO_USER_POLICY_REFRESH_WITH_CHANGE - 0x40004077 - (16503)
User QoS policies successfully refreshed. Policy changes detected.
EVENT_EQOS_INFO_TCP_AUTOTUNING_NOT_CONFIGURED - 0x40004078 - (16504)
The Advanced QoS Setting for inbound TCP throughput level successfully refreshed. Setting value is not specified by any QoS policy. Local computer default will be applied.
EVENT_EQOS_INFO_TCP_AUTOTUNING_OFF - 0x40004079 - (16505)
The Advanced QoS Setting for inbound TCP throughput level successfully refreshed. Setting value is Level 0 (minimum throughput).
EVENT_EQOS_INFO_TCP_AUTOTUNING_HIGHLY_RESTRICTED - 0x4000407A - (16506)
The Advanced QoS Setting for inbound TCP throughput level successfully refreshed. Setting value is Level 1.
EVENT_EQOS_INFO_TCP_AUTOTUNING_RESTRICTED - 0x4000407B - (16507)
The Advanced QoS Setting for inbound TCP throughput level successfully refreshed. Setting value is Level 2.
EVENT_EQOS_INFO_TCP_AUTOTUNING_NORMAL - 0x4000407C - (16508)
The Advanced QoS Setting for inbound TCP throughput level successfully refreshed. Setting value is Level 3 (maximum throughput).
EVENT_EQOS_INFO_APP_MARKING_NOT_CONFIGURED - 0x4000407D - (16509)
The Advanced QoS Setting for DSCP marking overrides successfully refreshed. Setting value is not specified by any QoS policy. Local computer default will be applied. By default, applications can set DSCP values independently of QoS policies.
EVENT_EQOS_INFO_APP_MARKING_IGNORED - 0x4000407E - (16510)
The Advanced QoS Setting for DSCP marking overrides successfully refreshed. Application DSCP marking requests will be ignored. Only QoS policies can set DSCP values.
EVENT_EQOS_INFO_APP_MARKING_ALLOWED - 0x4000407F - (16511)
The Advanced QoS Setting for DSCP marking overrides successfully refreshed. Applications can set DSCP values independently of QoS policies.
EVENT_EQOS_INFO_LOCAL_SETTING_DONT_USE_NLA - 0x40004080 - (16512)
Selective application of QoS policies based on domain or non-domain network category has been disabled on this machine. QoS policies will be applied to all network interfaces.
EVENT_EQOS_URL_QOS_APPLICATION_CONFLICT - 0x40004081 - (16513)
In the past %1 hour(s) and %2 minute(s), %3 HTTP.SYS responses have had their application requested QoS conflict with URL QoS policies.
EVENT_EQOS_WARNING_TEST_1 - 0x800040D8 - (16600)
EQOS: ***Testing***, with one string %2.
EVENT_EQOS_WARNING_TEST_2 - 0x800040D9 - (16601)
EQOS: ***Testing***, with two strings, string1 is %2, string2 is %3.
EVENT_EQOS_WARNING_MACHINE_POLICY_VERSION - 0x800040DA - (16602)
A computer QoS policy "%2" has an invalid version number. This policy will not be applied.
EVENT_EQOS_WARNING_USER_POLICY_VERSION - 0x800040DB - (16603)
A user QoS policy "%2" has an invalid version number. This policy will not be applied.
EVENT_EQOS_WARNING_MACHINE_POLICY_PROFILE_NOT_SPECIFIED - 0x800040DC - (16604)
A computer QoS policy "%2" does not specify a DSCP value or throttle rate. This policy will not be applied.
EVENT_EQOS_WARNING_USER_POLICY_PROFILE_NOT_SPECIFIED - 0x800040DD - (16605)
A user QoS policy "%2" does not specify a DSCP value or throttle rate. This policy will not be applied.
EVENT_EQOS_WARNING_MACHINE_POLICY_QUOTA_EXCEEDED - 0x800040DE - (16606)
Exceeded the maximum number of computer QoS policies. The computer QoS policy "%2" and subsequent computer QoS policies will not be applied.
EVENT_EQOS_WARNING_USER_POLICY_QUOTA_EXCEEDED - 0x800040DF - (16607)
Exceeded the maximum number of user QoS policies. The user QoS policy "%2" and subsequent user QoS policies will not be applied.
EVENT_EQOS_WARNING_MACHINE_POLICY_CONFLICT - 0x800040E0 - (16608)
A computer QoS policy "%2" potentially conflicts with other QoS policies. See documentation for rules about which policy will be applied at packet send time.
EVENT_EQOS_WARNING_USER_POLICY_CONFLICT - 0x800040E1 - (16609)
A user QoS policy "%2" potentially conflicts with other QoS policies. See documentation for rules about which policy will be applied at packet send time.
EVENT_EQOS_WARNING_MACHINE_POLICY_NO_FULLPATH_APPNAME - 0x800040E2 - (16610)
A computer QoS policy "%2" was ignored because the application path cannot be processed. The application path may be totally invalid, or has an invalid drive letter, or contains network-mapped drive letter.
EVENT_EQOS_WARNING_USER_POLICY_NO_FULLPATH_APPNAME - 0x800040E3 - (16611)
A user QoS policy "%2" was ignored because the application path cannot be processed. The application path may be totally invalid, or has an invalid drive letter, or contains network-mapped drive letter.
EVENT_EQOS_ERROR_MACHINE_POLICY_REFERESH - 0xC000413C - (16700)
Computer QoS policies failed to refresh. Error code: %2.
EVENT_EQOS_ERROR_USER_POLICY_REFERESH - 0xC000413D - (16701)
User QoS policies failed to refresh. Error code: %2.
EVENT_EQOS_ERROR_OPENING_MACHINE_POLICY_ROOT_KEY - 0xC000413E - (16702)
QoS failed to open the computer-level root key for QoS policies. Error code: %2.
EVENT_EQOS_ERROR_OPENING_USER_POLICY_ROOT_KEY - 0xC000413F - (16703)
QoS failed to open the user-level root key for QoS policies. Error code: %2.
EVENT_EQOS_ERROR_MACHINE_POLICY_KEYNAME_TOO_LONG - 0xC0004140 - (16704)
A computer QoS policy exceeds the maximum allowed name length. The offending policy is listed under the computer-level QoS policy root key, with index %2.
EVENT_EQOS_ERROR_USER_POLICY_KEYNAME_TOO_LONG - 0xC0004141 - (16705)
A user QoS policy exceeds the maximum allowed name length. The offending policy is listed under the user-level QoS policy root key, with index %2.
EVENT_EQOS_ERROR_MACHINE_POLICY_KEYNAME_SIZE_ZERO - 0xC0004142 - (16706)
A computer QoS policy has a zero length name. The offending policy is listed under the computer-level QoS policy root key, with index %2.
EVENT_EQOS_ERROR_USER_POLICY_KEYNAME_SIZE_ZERO - 0xC0004143 - (16707)
A user QoS policy has a zero length name. The offending policy is listed under the user-level QoS policy root key, with index %2.
EVENT_EQOS_ERROR_OPENING_MACHINE_POLICY_SUBKEY - 0xC0004144 - (16708)
QoS failed to open the registry subkey for a computer QoS policy. The policy is listed under the computer-level QoS policy root key, with index %2.
EVENT_EQOS_ERROR_OPENING_USER_POLICY_SUBKEY - 0xC0004145 - (16709)
QoS failed to open the registry subkey for a user QoS policy. The policy is listed under the user-level QoS policy root key, with index %2.
EVENT_EQOS_ERROR_PROCESSING_MACHINE_POLICY_FIELD - 0xC0004146 - (16710)
QoS failed to read or validate the "%2" field for the computer QoS policy "%3".
EVENT_EQOS_ERROR_PROCESSING_USER_POLICY_FIELD - 0xC0004147 - (16711)
QoS failed to read or validate the "%2" field for the user QoS policy "%3".
EVENT_EQOS_ERROR_SETTING_TCP_AUTOTUNING - 0xC0004148 - (16712)
QoS failed to read or set inbound TCP throughput level, error code: "%2".
EVENT_EQOS_ERROR_SETTING_APP_MARKING - 0xC0004149 - (16713)
QoS failed to read or set the DSCP marking override setting, error code: "%2".
EVENT_WINNAT_SESSION_LIMIT_REACHED - 0x80004268 - (17000)
WinNat session limit has been reached.
E_ADS_BAD_PATHNAME - 0x80005000 - (20480)
An invalid directory pathname was passed
E_ADS_INVALID_DOMAIN_OBJECT - 0x80005001 - (20481)
An unknown directory domain object was requested
E_ADS_INVALID_USER_OBJECT - 0x80005002 - (20482)
An unknown directory user object was requested
E_ADS_INVALID_COMPUTER_OBJECT - 0x80005003 - (20483)
An unknown directory computer object was requested
E_ADS_UNKNOWN_OBJECT - 0x80005004 - (20484)
An unknown directory object was requested
E_ADS_PROPERTY_NOT_SET - 0x80005005 - (20485)
The specified directory property was not set
E_ADS_PROPERTY_NOT_SUPPORTED - 0x80005006 - (20486)
The specified directory property is not supported
E_ADS_PROPERTY_INVALID - 0x80005007 - (20487)
The specified directory property is invalid
E_ADS_BAD_PARAMETER - 0x80005008 - (20488)
One or more input parameters are invalid
E_ADS_OBJECT_UNBOUND - 0x80005009 - (20489)
The specified directory object is not bound to a remote resource
E_ADS_PROPERTY_NOT_MODIFIED - 0x8000500A - (20490)
The specified directory object has not been modified
E_ADS_PROPERTY_MODIFIED - 0x8000500B - (20491)
The specified directory object has been modified
E_ADS_CANT_CONVERT_DATATYPE - 0x8000500C - (20492)
The directory datatype cannot be converted to/from a native DS datatype
E_ADS_PROPERTY_NOT_FOUND - 0x8000500D - (20493)
The directory property cannot be found in the cache.
E_ADS_OBJECT_EXISTS - 0x8000500E - (20494)
The directory object exists.
E_ADS_SCHEMA_VIOLATION - 0x8000500F - (20495)
The attempted action violates the DS schema rules.
E_ADS_COLUMN_NOT_SET - 0x80005010 - (20496)
The specified column in the directory was not set.
S_ADS_ERRORSOCCURRED - 0x00005011 - (20497)
One or more errors occurred
S_ADS_NOMORE_ROWS - 0x00005012 - (20498)
No more rows to be obatained by the search result.
S_ADS_NOMORE_COLUMNS - 0x00005013 - (20499)
No more columns to be obatained for the current row.
E_ADS_INVALID_FILTER - 0x80005014 - (20500)
The search filter specified is invalid
E_UNEXPECTED - 0x8000FFFF - (65535)
Catastrophic failure
No comments:
Post a Comment